E M C C o m p o n e n t s February 2015 Chip Beads For general signal line High GHz noise countermeasure (high-speed signal line) MMZ-V Series MMZ1005-V Type MMZ1005-V 1005[0402 inch]* * Dimensions Code JIS[EIA] (2/9) E M C C o m p o n e n t s REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using these products. REMINDERS The storage period is less than 12 months. Be sure to follow the storage conditions (Temperature: 5 to 40°C, Humidity: 10 to 75% RH or less). If the storage period elapses, the soldering of the terminal electrodes may deteriorate. Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.). Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature does not exceed 150°C. Soldering corrections after mounting should be within the range of the conditions determined in the specifications. If overheated, a short circuit, performance deterioration, or lifespan shortening may occur. When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions. Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal design. Carefully lay out the coil for the circuit board design of the non-magnetic shield type. A malfunction may occur due to magnetic interference. Use a wrist band to discharge static electricity in your body through the grounding wire. Do not expose the products to magnets or magnetic fields. Do not use for a purpose outside of the contents regulated in the delivery specifications. The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under a normal operation and use condition. The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions set forth in the each catalog, please contact us. (1) Aerospace/Aviation equipment (2) Transportation equipment (cars, electric trains, ships, etc.) (3) Medical equipment (4) Power-generation control equipment (5) Atomic energy-related equipment (6) Seabed equipment (7) Transportation control equipment (8) Public information-processing equipment (9) Military equipment (10) Electric heating apparatus, burning equipment (11) Disaster prevention/crime prevention equipment (12) Safety equipment (13) Other applications that are not considered general-purpose applications When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing protection circuit/device or providing backup circuits in your equipment. 20150203 / beads_commercial_signal_mmz1005-v_en.fm (3/9) E M C C o m p o n e n t s Chip Beads Product compatible with RoHS directive Halogen-free Compatible with lead-free solders For general signal line High GHz noise countermeasure (high-speed signal line) Overview of MMZ1005-V Type FEATURES 1005 shape type noise reduction component for general signal line. Features higher impedances in the GHz range compared to those of the MMZ-E Series chip beads. Exerts an excellent noise reduction effect against noise interfering at several GHz such as LTE or Wi-Fi, or against high-frequency noise. Achieves particularly high impedances in the range from 0.7GHz to 3GHz , enabling a reduction of noise that could not be reduced using the conventional MMZ-E series. Realizes the highest impedance in the industry at 2.5 GHz through the adoption of a newly-developed material (according to research by TDK in August 2008). APPLICATION Ensuring communication sensitivity of wireless communication using high-speed signals such as LTE or Wi-Fi Noise reduction for mobile equipment including smartphones and tablets or various modules Noise removal for home electronics including PCs, recorders, STBs or for smartgrids or industrial equipment PART NUMBER CONSTRUCTION MMZ Series name 1005 L×W×T Dimensions (mm) 1005 1.0×0.5x0.5 AFZ Material name AFZ 750 V Impedance (:) at 100MHz 750 75 151 150 181 180 Characteristic type V T 000 Packaging style Internal code T Taping 000 OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT Temperature range Operating Storage Type temperature temperature （°C） （°C） MMZ1005-V –55 to +125 –55 to +125 The Storage temperature range is for after the circuit board is mounted. Package quantity Individual weight (pieces/reel) 10,000 （mg） 1 RoHS Directive Compliant Product: See the following for more details related to RoHS Directive compliant products. http://product.tdk.com/en/environment/rohs/ Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150203 / beads_commercial_signal_mmz1005-v_en.fm (4/9) E M C C o m p o n e n t s MMZ1005-V Type RECOMMENDED REFLOW PROFILE Preheating Soldering Natural cooling Peak T: Temperature T4 T3 T2 T3 t3 T1 t1 t2 t: Time Preheating Temp. T1 T2 150°C 180°C Time t1 60 to 120s Soldering Temp. Time T3 t2 230°C 30 to 60s Peak Temp. T4 250 to 260°C Time t3 10s Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150203 / beads_commercial_signal_mmz1005-v_en.fm (5/9) E M C C o m p o n e n t s MMZ1005-V Type SHAPE & DIMENSIONS 0.5±0.05 0.5±0.05 1±0.05 Dimensions in mm 0.1min. 0.5 RECOMMENDED LAND PATTERN 0.5 0.4 0.5 Dimensions in mm Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150203 / beads_commercial_signal_mmz1005-v_en.fm (6/9) E M C C o m p o n e n t s MMZ1005-V Type ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE Impedance [100MHz] (: ) 75 150 180 Tolerance ±25% ±25% ±25% [1GHz] (: ) 500 1000 1200 Tolerance ±40% ±40% ±40% ○ Measurement equipment Measurement item Product No. Impedance E4991A+16192A DC resistance Type-7556 ＊ Equivalent measurement equipment may be used. [2.5GHz] (: ) 1400 2500 3000 DC resistance Rated current Part No. (: )max. 0.90 1.30 1.60 (mA)max. 250 200 150 MMZ1005AFZ750VT000 MMZ1005AFZ151VT000 MMZ1005AFZ181VT000 Manufacturer Agilent Technologies Yokogawa Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150203 / beads_commercial_signal_mmz1005-v_en.fm (7/9) E M C C o m p o n e n t s MMZ1005-V Type ELECTRICAL CHARACTERISTICS Z VS. FREQUENCY CHARACTERISTICS (BY SERIES) MMZ1005-V SERIES 3500 3000 MMZ1005AFZ181V Impedance (Ω) 2500 2000 MMZ1005AFZ151V 1500 MMZ1005AFZ750V 1000 500 0 1 10 100 1000 Frequency (MHz) 10000 Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150203 / beads_commercial_signal_mmz1005-v_en.fm (8/9) E M C C o m p o n e n t s MMZ1005-V Type ELECTRICAL CHARACTERISTICS MMZ1005AFZ181VT000 3000 Z R X 1 10 100 1000 Frequency (MHz) 10000 2500 Impedance (Ω) 1600 1400 1200 1000 800 600 400 200 0 Impedance (Ω) Impedance (Ω) Z, X, R VS. FREQUENCY CHARACTERISTICS MMZ1005AFZ750VT000 MMZ1005AFZ151VT000 2000 1500 Z 1000 X 500 0 R 1 10 100 1000 Frequency (MHz) 10000 3500 3000 2500 2000 1500 1000 500 0 Z R X 1 10 100 1000 Frequency (MHz) 10000 Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150203 / beads_commercial_signal_mmz1005-v_en.fm (9/9) E M C C o m p o n e n t s MMZ1005-V Type PACKAGING STYLE REEL DIMENSIONS ø60min. 2.0±0.5 1.0 8.4 +2.0 –0.0 ø13±0.2 ø21±0.8 14.4max. ø180±2.0 Dimensions in mm 4.0±0.1 B A 8.0±0.3 2.0±0.05 3.5±0.05 1.5 +0.1 0 1.75±0.1 TAPE DIMENSIONS P1 K Dimensions in mm Type MMZ1005-V 160min. Drawing direction A 0.65±0.1 Taping B 1.15±0.1 P1 2.0±0.05 K 0.8max. 200min. 300min. Dimensions in mm Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150203 / beads_commercial_signal_mmz1005-v_en.fm