AMERICAN BRIGHT OPTOELECTRONICS CORP. • AlInGap DOMILED BL-PDx-xRS Series Feature: 1. High brightness surface mount LED. 2. 120° viewing angle. 3. Small package outline (LxWxH) of 2.8 x 3.2 x 1.8 mm. 4. Qualified according to JEDEC moisture sensitivity Level 2. 5. Compatible to both IR reflow soldering and TTW soldering. • Package Dimension: Recommended Solder Pad V.2 Page: 1 of 8 AMERICAN BRIGHT OPTOELECTRONICS CORP. AlInGap DOMILED BL-PDx-xRS Series • Optical Characteristics: Part Number BL-PDH-CRS-C10 • BIN P1 • BIN P2 • BIN Q1 • BIN Q2 BL-PDS-CRS-C10 • BIN Q1 • BIN Q2 • BIN R1 • BIN R2 Chip Technology / Color AlInGaP Hyper-red, 640nm AlInGaP Super-red, 632nm Viewing Angle ° 120 120 BL-PDS-SRS-C10 • BIN Q1 • BIN Q2 • BIN R1 • BIN R2 BL-PDR-CRS-C10 • BIN R1 • BIN R2 • BIN S1 • BIN S2 Luminous Intensity @ IF=20mA Iv (mcd) 45.0 – 112.5 45.0 – 56.0 56.0 – 71.5 71.5 – 90.0 90.0 – 112.5 71.5 – 180.0 71.5 – 90.0 90.0 – 112.5 112.5 – 140.0 140.0 – 180.0 71.5 – 180.0 71.5 – 90.0 90.0 – 112.5 112.5 – 140.0 140.0 – 180.0 AlInGaP Red, 625nm 120 BL-PDR-SRS-C10 • BIN R1 • BIN R2 • BIN S1 • BIN S2 112.5 – 285.0 112.5 – 140.0 140.0 – 180.0 180.0 – 224.0 224.0 – 285.0 112.5 – 285.0 112.5 – 140.0 140.0 – 180.0 180.0 – 224.0 224.0 – 285.0 BL-PDR-TRS-C10 • BIN T1 • BIN T2 • BIN U1 • BIN U2 TS AlInGaP Red, 625nm 120 285.0 – 715.0 285.0 – 355.0 355.0 – 450.0 450.0 – 560.0 560.0 – 715.0 BL-PDA-CRS-C10 • BIN R1 • BIN R2 • BIN S1 • BIN S2 AlInGaP Amber, 615nm 120 112.5 – 285.0 112.5 – 140.0 140.0 – 180.0 180.0 – 224.0 224.0 – 285.0 BL-PDA-SRS-C10 • BIN S1 • BIN S2 • BIN T1 • BIN T2 180.0 – 450.0 180.0 – 224.0 224.0 – 285.0 285.0 – 355.0 355.0 – 450.0 V.2 Page: 2 of 8 AMERICAN BRIGHT OPTOELECTRONICS CORP. AlInGap DOMILED BL-PDx-xRS Series Part Ordering Number BL-PDO-CRS-C10 • BIN R1 • BIN R2 • BIN S1 • BIN S2 Chip Technology / Color AlInGaP Orange, 605nm Viewing Angle 120 Luminous Intensity @ IF=20mA Iv (mcd) 112.5 – 285.0 112.5 – 140.0 140.0 – 180.0 180.0 – 224.0 224.0 – 285.0 BL-PDO-SRS-C10 • BIN S1 • BIN S2 • BIN T1 • BIN T2 BL-PDY-CRS-C10 • BIN R1 • BIN R2 • BIN S1 • BIN S2 180.0 – 450.0 180.0 – 224.0 224.0 – 285.0 285.0 – 355.0 355.0 – 450.0 AlInGaP Yellow, 587nm 120 BL-PDY-SRS-C10 • BIN S1 • BIN S2 • BIN T1 • BIN T2 112.5 – 285.0 112.5 – 140.0 140.0 – 180.0 180.0 – 224.0 224.0 – 285.0 180.0 – 450.0 180.0 – 224.0 224.0 – 285.0 285.0 – 355.0 355.0 – 450.0 BL-PDY-TRS-C10 • BIN T1 • BIN T2 • BIN U1 • BIN U2 TS AlInGaP Yellow, 590nm 120 285.0 – 715.0 285.0 – 355.0 355.0 – 450.0 450.0 – 560.0 560.0 – 715.0 BL-PDG-CRS-C10 • BIN P1 • BIN P2 • BIN Q1 • BIN Q2 AlInGaP Green, 572nm 120 45.0 – 112.5 45.0 – 56.0 56.0 – 71.5 71.5 – 90.0 90.0 – 112.5 BL-PDG-SRS-C10 • BIN Q1 • BIN Q2 • BIN R1 • BIN R2 71.5 – 180.0 71.5 – 90.0 90.0 – 112.5 112.5 – 140.0 140.0 – 180.0 NOTE: 1. Other luminous intensity groups are also available upon request. 2. Luminous intensity is measured with an accuracy of ±11%. 3. Wavelength binning is carried for all units as per the wavelength-binning table. Only one wavelength group is allowed for each reel. 4. An optional Vf binning is also available upon request. Binning scheme is as per following table. V.2 Page: 3 of 8 AMERICAN BRIGHT OPTOELECTRONICS CORP. AlInGap DOMILED BL-PDx-xRS Series • Absolute Maximum Ratings: Parameter Maximum Value DC forward current. Peak pulse current; (tp ≤ 10 µs, Duty cycle = 0.005) Reverse voltage. Unit 30 mA 1000 mA 5 V 125 °C Operating temperature. -40 … +100 °C Storage temperature. -40 … +100 °C LED junction temperature. Power dissipation ( at room temperature ) • 75 mW Vf Binning: Vf Bin @ 20mA Forward Voltage (V) Standard 1.55 … 2.45 (max) 01 1.55 … 1.85 02 1.85 … 2.15 03 2.15 … 2.45 04 2.45 … 2.75 Forward voltage, Vf is measured with an accuracy of ±0.1 V. V.2 Page: 4 of 8 AMERICAN BRIGHT OPTOELECTRONICS CORP. • AlInGap DOMILED BL-PDx-xRS Series Wavelength Grouping: Color Group Wavelength distribution (nm) BL-PDH; Hyper-red Full 636 - 646 BL-PDS; Super-red Full 625 – 640 BL-PDR-CJ, -SJ; Red (AS) Full 620 – 630 BL-PDR-TJ; Red (TS) Full 620 - 635 BL-PDA; Amber Full 610 – 621 W 610 – 615 X 615 – 621 Full 600 – 612 W 600 – 603 X 603 – 606 Y 606 - 609 Z 609 - 612 Full 582 – 594 W 582 – 585 X 585 – 588 Y 588 - 591 Z 591 - 594 Full 564.5 – 576.5 W 564.5 – 567.5 X 567.5 – 570.5 Y 570.5 – 573.5 Z 573.5 – 576.5 BL-PDO; Orange BL-PDY; Yellow BL-PDG; Green V.2 Page: 5 of 8 AMERICAN BRIGHT OPTOELECTRONICS CORP. • AlInGap DOMILED BL-PDx-xRS Series Typical electro-optical characteristics curves: Fig. 2 Forward current vs. forward voltage. Fig. 1 Relative luminous intensity vs. forward current. Intensity vs. DC Forward Current Forward Current (mA) vs. Forward Voltage 30 2 Forward Current (mA) Relative intensity. Normalized at 20 mA. 35 2.2 1.8 1.6 1.4 1.2 1 0.8 0.6 25 AS AlInGaP 20 15 TS AlInGaP 10 5 0.4 0.2 0 0 0 10 20 30 40 50 1.2 60 1.4 1.6 20° 10° 2 2.2 2.4 2.6 Fig. 4 Maximum forward current vs. temperature. Fig. 3 Radiation pattern. 30° 1.8 Forward Voltage (V) FORWARD CURRENT (mA) 0° 1.0 35 30 40° 0.8 50° 0.6 60° 0.4 Forward Current, If 25 20 15 10 70° 0.2 5 80° 0 0 10 20 30 40 50 60 70 80 90 Ambient Temperature Fig. 5 Relative Intensity vs. Wavelength Relative Spectra Emission 1.0 0.9 Orange 0.8 Amber 0.7 Relative Intensity 90° 0 Red 0.6 Super Red Green 0.5 Hyper Red 0.4 0.3 0.2 0.1 0.0 500 550 600 650 700 750 800 Wavelength (nm) V.2 Page: 6 of 8 100 AMERICAN BRIGHT OPTOELECTRONICS CORP. AlInGap DOMILED BL-PDx-xRS Series Fig. 6 Recommended IR-reflow Soldering Profile. Classification Reflow Profile (JEDEC J-STD-020B) 275 250 235-240oC 10-30s 200 Ramp-up 3 oC/sec 183 oC o Temperature ( C) 225 175 60-150s 150 125 Ramp-down 6 oC/sec 100 Preheat 60-120s 75 50 360s max 25 0 50 100 150 200 Time (sec) Fig. 7 Recommended TTW Soldering Profile . V.2 Page: 7 of 8 AMERICAN BRIGHT OPTOELECTRONICS CORP. AlInGap DOMILED BL-PDx-xRS Series • Taping And Orientation. Reels come in quantity of 8000 units or 2000 units. Reel diameters are 330 mm and 180 mm respectively. V.2 Page: 8 of 8