To our customers, Old Company Name in Catalogs and Other Documents On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took over all the business of both companies. Therefore, although the old company name remains in this document, it is a valid Renesas Electronics document. We appreciate your understanding. Renesas Electronics website: http://www.renesas.com April 1st, 2010 Renesas Electronics Corporation Issued by: Renesas Electronics Corporation (http://www.renesas.com) Send any inquiries to http://www.renesas.com/inquiry. Notice 1. 2. 3. 4. 5. 6. 7. All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. When exporting the products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. Renesas Electronics products are classified according to the following three quality grades: “Standard”, “High Quality”, and “Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise expressly specified in a Renesas Electronics data sheets or data books, etc. “Standard”: 8. 9. 10. 11. 12. Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots. “High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anticrime systems; safety equipment; and medical equipment not specifically designed for life support. “Specific”: Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas Electronics. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. (Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majorityowned subsidiaries. (Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics. HD74HC125, HD74HC126 Quad. Bus Buffer Gates (with 3-state outputs) REJ03D0565-0300 Rev.3.00 Mar 25, 2009 Description The HD74HC125, HD74HC126 require the 3-state control input C to be taken high to put the output into the high impedance condition, whereas the HD74HC125, HD74HC126 requires the control input to be low to put the output into high impedance. Features • • • • • • High Speed Operation: tpd = 8 ns typ (CL = 50 pF) High Output Current: Fanout of 15 LSTTL Loads Wide Operating Voltage: VCC = 2 to 6 V Low Input Current: 1 µA max Low Quiescent Supply Current: ICC (static) = 4 µA max (Ta = 25°C) Ordering Information Part Name HD74HC125P HD74HC126P HD74HC125FPEL HD74HC126FPEL HD74HC125RPEL HD74HC126RPEL HD74HC125TELL HD74HC126TELL Note: Package Type Package Code (Previous Code) Package Abbreviation Taping Abbreviation (Quantity) DILP-14 pin PRDP0014AB-B (DP-14AV) P SOP-14 pin (JEITA) PRSP0014DF-B (FP-14DAV) FP EL (2,000 pcs/reel) SOP-14 pin (JEDEC) PRSP0014DE-A (FP-14DNV) RP EL (2,500 pcs/reel) TSSOP-14 pin PTSP0014JA-B (TTP-14DV) T ELL (2,000 pcs/reel) — Please consult the sales office for the above package availability. Function Table Inputs C H: L: X: Z: HC125 H L HC126 L H L H High level Low level Irrelevant Off (high-impedance) state of a 3-state output. REJ03D0565-0300 Rev.3.00 Mar 25, 2009 Page 1 of 8 Output A Y X L HC125 Z L HC126 Z L H H H HD74HC125, HD74HC126 Pin Arrangement • HD74HC125 1C 1 14 VCC 1A 2 13 4C 1Y 3 12 4A 2C 4 11 4Y 2A 5 10 3C 2Y 6 9 3A GND 7 8 3Y (Top view) • HD74HC126 1C 1 14 VCC 1A 2 13 4C 1Y 3 12 4A 2C 4 11 4Y 2A 5 10 3C 2Y 6 9 3A GND 7 8 3Y (Top view) REJ03D0565-0300 Rev.3.00 Mar 25, 2009 Page 2 of 8 HD74HC125, HD74HC126 Absolute Maximum Ratings Item Supply voltage range Input voltage Output voltage Output current DC current drain per VCC, GND DC input diode current DC output diode current Power dissipation per package Storage temperature Note: Symbol VCC VIN VOUT IOUT ICC, IGND IIK IOK PT Tstg Rating –0.5 to +7.0 –0.5 to VCC + 0.5 –0.5 to VCC + 0.5 ±35 ±75 ±20 ±20 500 –65 to +150 Unit V V V mA mA mA mA mW °C The absolute maximum ratings are values, which must not individually be exceeded, and furthermore, no two of which may be realized at the same time. Recommended Operating Conditions Item Supply voltage Input / Output voltage Symbol VCC VIN, VOUT Ratings 2 to 6 0 to VCC Unit V V Operating temperature Ta –40 to 85 0 to 1000 °C Input rise / fall time*1 tr, tf 0 to 500 ns VCC = 2.0 V 0 to 400 Note: Conditions VCC = 4.5 V VCC = 6.0 V 1. This item guarantees maximum limit when one input switches. Waveform: Refer to test circuit of switching characteristics. Electrical Characteristics Item VIH 2.0 4.5 Ta = 25°C Min Typ Max 1.5 — — 3.15 — — VIL 6.0 2.0 4.5 4.2 — — — — — — 0.5 1.35 4.2 — — — 0.5 1.35 6.0 2.0 4.5 6.0 4.5 — 1.9 4.4 5.9 4.18 — 2.0 4.5 6.0 — 1.8 — — — — — 1.9 4.4 5.9 4.13 1.8 — — — — 6.0 2.0 4.5 6.0 4.5 5.68 — — — — — 0.0 0.0 0.0 — — 0.1 0.1 0.1 0.26 5.63 — — — — — 0.1 0.1 0.1 0.33 6.0 — — 0.26 — 0.33 Symbol VCC (V) Input voltage VOH Output voltage VOL Ta = –40 to+85°C Unit Min Max 1.5 — V 3.15 — Off-state output current IOZ 6.0 — — ±0.5 — ±5.0 Input current Iin 6.0 — — ±0.1 — ±1.0 Quiescent supply current ICC 6.0 — — 4.0 — 40 REJ03D0565-0300 Rev.3.00 Mar 25, 2009 Page 3 of 8 Test Conditions V IOH = –20 µA V Vin = VIH or VIL IOH = –6 mA IOH = –7.8 mA IOL = 20 µA V Vin = VIH or VIL IOL = 6 mA IOL = 7.8 mA Vin = VIH or VIL, Vout = VCC or GND µA Vin = VCC or GND µA µA Vin = VCC or GND, Iout = 0 µA HD74HC125, HD74HC126 Switching Characteristics (CL = 50 pF, Input tr = tf = 6 ns) Item Symbol VCC (V) Propagation delay time tPLH, tPHL Output enable Time tZH, tZL Output disable Time tHZ, tLZ Output rise/fall time tTLH, tTHL Input capacitance Cin 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 Min — — — — — — — — — — — — — — Ta = 25°C Ta = –40 to +85°C Unit Typ Max Min Max — 100 — 125 ns 8 20 — 25 — 17 — 21 — 150 — 190 ns 9 30 — 38 — 26 — 33 — 150 — 190 ns 14 30 — 38 — 26 — 33 — 60 — 75 ns 4 12 — 15 — 10 — 13 5 10 — 10 Test Conditions pF Test Circuit VCC Pulse generator Z OUT = 50 Ω See Function Table Input VCC Output C A Y Note: C L includes the probe and jig capacitance. REJ03D0565-0300 Rev.3.00 Mar 25, 2009 Page 4 of 8 1 k Ω S1 OPEN See under table GND *1 CL = 50 pF TEST t PLH /tPHL S1 OPEN t ZH/tHZ t ZL /tLZ GND VCC HD74HC125, HD74HC126 Waveforms • HD74HC125 • Waveform – 1 tf tr 90 % 50 % Input A VCC 90 % 50 % 10 % 10 % 0V t PHL t PLH VOH Output Y 50 % 50 % VOL • Waveform – 2 Input C tf tr 90 % 50 % VCC 90 % 50 % 10 % 10 % 0V t LZ t ZL VOH Waveform - A 50 % t ZH Waveform - B 50 % 10 % VOL t HZ 90 % VOH VOL Notes : 1. tr ≤ 6 ns, tf ≤ 6 ns 2. Input waveform : PRR ≤ 1 MHz, duty cycle 50% 3. Waveform– A is for an output with internal conditions such that the output is low except when disabled by the output control. 4. Waveform– B is for an output with internal conditions such that the output is high except when disabled by the output control. REJ03D0565-0300 Rev.3.00 Mar 25, 2009 Page 5 of 8 HD74HC125, HD74HC126 Waveforms • HD74HC126 • Waveform – 1 tf tr 90 % 50 % Input A VCC 90 % 50 % 10 % 10 % 0V t PHL t PLH VOH Output Y 50 % 50 % VOL • Waveform – 2 tr tf VCC 90 % 50 % 90 % 50 % Input C 10 % 10 % 0V t LZ t ZL VOH Waveform - A 50 % t ZH Waveform - B 50 % 10 % VOL t HZ 90 % VOH VOL Notes : 1. tr ≤ 6 ns, tf ≤ 6 ns 2. Input waveform : PRR ≤ 1 MHz, duty cycle 50% 3. Waveform– A is for an output with internal conditions such that the output is low except when disabled by the output control. 4. Waveform– B is for an output with internal conditions such that the output is high except when disabled by the output control. REJ03D0565-0300 Rev.3.00 Mar 25, 2009 Page 6 of 8 HD74HC125, HD74HC126 Package Dimensions JEITA Package Code P-DIP14-6.3x19.2-2.54 RENESAS Code PRDP0014AB-B Previous Code DP-14AV MASS[Typ.] 0.97g D 8 E 14 7 1 b3 A Z A1 Reference Symbol L e1 D E A A1 bp b3 c θ e Z L θ bp e c e1 ( Ni/Pd/Au plating ) JEITA Package Code P-SOP14-3.95x8.65-1.27 RENESAS Code PRSP0014DE-A *1 Previous Code FP-14DNV Min Nom Max 7.62 19.2 20.32 6.3 7.4 5.06 0.51 0.40 0.48 0.56 1.30 0.19 0.25 0.31 0° 15° 2.29 2.54 2.79 2.39 2.54 MASS[Typ.] 0.13g NOTE) 1. DIMENSIONS"*1 (Nom)"AND"*2" DO NOT INCLUDE MOLD FLASH. 2. DIMENSION"*3"DOES NOT INCLUDE TRIM OFFSET. F D 14 Dimension in Millimeters 8 c *2 Index mark HE E bp Terminal cross section ( Ni/Pd/Au plating ) Reference Dimension in Millimeters Symbol Min 1 Z 7 e *3 bp x M A L1 A1 θ L y Detail F REJ03D0565-0300 Rev.3.00 Mar 25, 2009 Page 7 of 8 D E A2 A1 A bp b1 c c1 θ HE e x y Z L L1 Nom Max 8.65 9.05 3.95 0.10 0.14 0.25 1.75 0.34 0.40 0.46 0.15 0.20 0.25 0° 8° 5.80 6.10 6.20 1.27 0.25 0.15 0.635 0.40 0.60 1.27 1.08 HD74HC125, HD74HC126 JEITA Package Code P-SOP14-5.5x10.06-1.27 RENESAS Code PRSP0014DF-B *1 Previous Code FP-14DAV MASS[Typ.] 0.23g D F 14 NOTE) 1. DIMENSIONS"*1 (Nom)"AND"*2" DO NOT INCLUDE MOLD FLASH. 2. DIMENSION"*3"DOES NOT INCLUDE TRIM OFFSET. 8 c *2 E HE bp Index mark Terminal cross section ( Ni/Pd/Au plating ) 1 7 e Z *3 bp x Reference Dimension in Millimeters Symbol M A L1 A1 θ y L Detail F JEITA Package Code P-TSSOP14-4.4x5-0.65 RENESAS Code PTSP0014JA-B *1 Previous Code TTP-14DV D E A2 A1 A bp b1 c c1 θ HE e x y Z L L1 Min Nom Max 10.06 10.5 5.50 0.00 0.10 0.20 2.20 0.34 0.40 0.46 0.15 0.20 0.25 0° 8° 7.50 7.80 8.00 1.27 0.12 0.15 1.42 0.50 0.70 0.90 1.15 MASS[Typ.] 0.05g D F 14 8 NOTE) 1. DIMENSIONS"*1 (Nom)"AND"*2" DO NOT INCLUDE MOLD FLASH. 2. DIMENSION"*3"DOES NOT INCLUDE TRIM OFFSET. HE c *2 E bp Index mark Terminal cross section ( Ni/Pd/Au plating ) Reference Dimension in Millimeters Symbol 7 1 *3 Z bp x M L1 A e A1 θ L y Detail F REJ03D0565-0300 Rev.3.00 Mar 25, 2009 Page 8 of 8 D E A2 A1 A bp b1 c c1 θ HE e x y Z L L1 Min Nom Max 5.00 5.30 4.40 0.03 0.07 0.10 1.10 0.15 0.20 0.25 0.10 0.15 0.20 0° 8° 6.20 6.40 6.60 0.65 0.13 0.10 0.83 0.4 0.5 0.6 1.0 Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Notes: 1. This document is provided for reference purposes only so that Renesas customers may select the appropriate Renesas products for their use. Renesas neither makes warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property rights or any other rights of Renesas or any third party with respect to the information in this document. 2. Renesas shall have no liability for damages or infringement of any intellectual property or other rights arising out of the use of any information in this document, including, but not limited to, product data, diagrams, charts, programs, algorithms, and application circuit examples. 3. You should not use the products or the technology described in this document for the purpose of military applications such as the development of weapons of mass destruction or for the purpose of any other military use. When exporting the products or technology described herein, you should follow the applicable export control laws and regulations, and procedures required by such laws and regulations. 4. All information included in this document such as product data, diagrams, charts, programs, algorithms, and application circuit examples, is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas products listed in this document, please confirm the latest product information with a Renesas sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas such as that disclosed through our website. (http://www.renesas.com ) 5. Renesas has used reasonable care in compiling the information included in this document, but Renesas assumes no liability whatsoever for any damages incurred as a result of errors or omissions in the information included in this document. 6. When using or otherwise relying on the information in this document, you should evaluate the information in light of the total system before deciding about the applicability of such information to the intended application. Renesas makes no representations, warranties or guaranties regarding the suitability of its products for any particular application and specifically disclaims any liability arising out of the application and use of the information in this document or Renesas products. 7. With the exception of products specified by Renesas as suitable for automobile applications, Renesas products are not designed, manufactured or tested for applications or otherwise in systems the failure or malfunction of which may cause a direct threat to human life or create a risk of human injury or which require especially high quality and reliability such as safety systems, or equipment or systems for transportation and traffic, healthcare, combustion control, aerospace and aeronautics, nuclear power, or undersea communication transmission. If you are considering the use of our products for such purposes, please contact a Renesas sales office beforehand. Renesas shall have no liability for damages arising out of the uses set forth above. 8. Notwithstanding the preceding paragraph, you should not use Renesas products for the purposes listed below: (1) artificial life support devices or systems (2) surgical implantations (3) healthcare intervention (e.g., excision, administration of medication, etc.) (4) any other purposes that pose a direct threat to human life Renesas shall have no liability for damages arising out of the uses set forth in the above and purchasers who elect to use Renesas products in any of the foregoing applications shall indemnify and hold harmless Renesas Technology Corp., its affiliated companies and their officers, directors, and employees against any and all damages arising out of such applications. 9. You should use the products described herein within the range specified by Renesas, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas shall have no liability for malfunctions or damages arising out of the use of Renesas products beyond such specified ranges. 10. Although Renesas endeavors to improve the quality and reliability of its products, IC products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Please be sure to implement safety measures to guard against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other applicable measures. Among others, since the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 11. In case Renesas products listed in this document are detached from the products to which the Renesas products are attached or affixed, the risk of accident such as swallowing by infants and small children is very high. You should implement safety measures so that Renesas products may not be easily detached from your products. Renesas shall have no liability for damages arising out of such detachment. 12. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written approval from Renesas. 13. Please contact a Renesas sales office if you have any questions regarding the information contained in this document, Renesas semiconductor products, or if you have any other inquiries. http://www.renesas.com RENESAS SALES OFFICES Refer to "http://www.renesas.com/en/network" for the latest and detailed information. Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501 Renesas Technology Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K. Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900 Renesas Technology (Shanghai) Co., Ltd. Unit 204, 205, AZIACenter, No.1233 Lujiazui Ring Rd, Pudong District, Shanghai, China 200120 Tel: <86> (21) 5877-1818, Fax: <86> (21) 6887-7858/7898 Renesas Technology Hong Kong Ltd. 7th Floor, North Tower, World Finance Centre, Harbour City, Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2377-3473 Renesas Technology Taiwan Co., Ltd. 10th Floor, No.99, Fushing North Road, Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 3518-3399 Renesas Technology Singapore Pte. Ltd. 1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 Renesas Technology Korea Co., Ltd. Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea Tel: <82> (2) 796-3115, Fax: <82> (2) 796-2145 Renesas Technology Malaysia Sdn. Bhd Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: <603> 7955-9390, Fax: <603> 7955-9510 © 2009. Renesas Technology Corp., All rights reserved. Printed in Japan. Colophon .7.2