Infineon BXY43 Hirel silicon pin diode Datasheet

BXY43
HiRel Silicon PIN Diode
•
HiRel Discrete and Microwave
Semiconductor
•
Current controlled RF resistor for RF
attenuators and switches
•
High reverse voltage
•
Hermetically sealed microwave
package
•
Space Qualified
ESA/SCC Detail Spec. No.: 5513/030
Type Variant No.s 01 to 03
T
T1
P1
FP
ESD: Electrostatic discharge sensitive
device,
observe handling precautions!
Type
BXY43-T (ql)
Marking
-
Ordering Code
see below
Pin Configuration
Package
1
2
T
BXY43-T1 (ql)
1
2
T1
BXY43-P1 (ql)
1
2
T2
BXY43-FP (ql)
1
1'
FP
2
(ql) Quality Level:
P: Professional Quality,
Ordering Code:
Q62702X151
H: High Rel Quality,
Ordering Code:
on request
S: Space Quality,
Ordering Code:
on request
ES: ESA Space Quality,
Ordering Code:
Q62702X169
(see order instructions for ordering example)
Semiconductor Group
1 of 6
Draft B, September 99
BXY43
Maximum Ratings
Parameter
Symbol
Reverse Voltage
VR
150
V
IF
400
mA
Ptot
500
mW
Operating Temperature Range
Top
-55 to +150
°C
Storage Temperature Range
Tstg
-65 to +175
°C
Soldering Temperature 2)
Tsol
+235
°C
Junction Temperature
Tj
150
°C
Thermal Resistance Junction-Case
Rth(j-c)
Forward Current
Power Dissipation
1)
Values
Unit
K/W
100
BXY43-T
125
BXY43-T1
90
BXY43-P1
100
BXY43-FP
Notes.:
1.) For BXY43-T:
At TCASE = 100 °C. For TCASE > 100 °C derating is required.
For BXY43-T1: At TCASE = 87,5 °C. For TCASE > 87,5 °C derating is required.
For BXY43-P1: At TCASE = 105 °C. For TCASE > 105 °C derating is required.
For BXY43-FP: At TCASE = 100 °C. For TCASE > 100 °C derating is required.
2.) During 5 sec. maximum. The same terminal shall not be resoldered until 5 minutes have
elapsed.
Electrical Characteristics
at TA=25°C; unless otherwise specified
Parameter
Symbol
Values
Unit
min.
typ.
max.
IR1
-
-
100
nA
IR2
-
-
10
nA
VF
-
0,97
1
V
DC Characteristics
Reverse Current 1
VR1=150V
Reverse Current 2
VR2=100V
Forward Voltage
IF=100mA
Semiconductor Group
2 of 6
Draft B, September 99
BXY43
Electrical Characteristics (continued)
Parameter
Symbol
Values
min.
typ.
Unit
max.
AC Characteristics
Total Capacitance
pF
CT
VR=50V; f=1MHz
BXY43-T, -T1
-
0,3
0,45
BXY43-P1
0,3
0,50
0,75
BXY43-FP
0,4
0,6
0,85
RF1
-
55
70
Ω
RF2
-
2,2
3,0
Ω
RF3
-
0,9
1,5
Ω
τL
250
650
Forward Resistance 1
f=100MHz, IF1=20µA
Forward Resistance 2
f=100MHz, IF2=1mA
Forward Resistance 3
f=100MHz, IF3=10mA
Minority Carrier Lifetime
ns
IF=10mA, IR=6mA, IR=3mA
Semiconductor Group
3 of 6
Draft B, September 99
BXY43
Order Instructions:
Full type variant including package variant and quality level must be specified by the orderer.
For HiRel Discrete and Microwave Semiconductors the ordering code specifies device family
and quality level only.
Ordering Form:
Ordering Code: Q..........
BXY43- (x) (ql)
(x): Package Variant
(ql): Quality Level
Ordering Example:
Ordering Code: Q62702X169
BXY43-T1 ES
For BXY43 in T1 Package; ESA Space Quality Level
Further Informations:
See our WWW-Pages:
- Discrete and RF-Semiconductors (Small Signal Semiconductors)
www.infineon.com/products/discrete/hirel.htm
- HiRel Discrete and Microwave Semiconductors
www.infineon.com/products/discrete/hirel.htm
Please contact also our marketing division :
Tel.:
Fax.:
e-mail:
Address:
Semiconductor Group
++89 234 24480
++89 234 25568
[email protected]
Infineon Technologies Semiconductors,
High Frequency Products Marketing,
P.O.Box 801709,
D-81617 Munich
4 of 6
Draft B, September 99
BXY43
T Package
B
X1
A
C
Y1
Symbol
Y2
A
B
C
2
1
Millimetre
min
max
1,30
1,45
1,15
1,35
0,40
T1 Package
X1
B
Y1
A
Y2
Symbol
C
A
B
C
D
E
F
G
H
2
1
D
F
E
H
G
G
Millimetre
min
max
1,30
1,45
1,15
1,35
0,40
0,10
0,50
0,30
0,06
0,10
5,50
0,40
0,60
P1 Package
Symbol
X1
Cathode
Y1
∅A
∅B
C
D
Y2
2
1
D
Millimetre
min
max
2,0
2,2
3,0
3,2
1,45
1,7
0,4
0,6
A
C
Semiconductor Group
B
5 of 6
Draft B, September 99
BXY43
FP Package
Y1
L
B
B1
Symbol
L
X1
d
B
B1
D
D1
d
d1
F
L
D
D1
Y2
2
1
1'
d1
F
n.c.
Millimetre
min
max
3,10
3,55
3,00
3,30
1,30
1,70
0,55
0,65
0,10
0,15
0,25
0,40
2,40
2,60
5,50
-
n.c.
Published by Infineon Technologies Semiconductors,
High Frequency Products Marketing, P.O.Box 801709,
D-81617 Munich.
Infineon Technologies AG 1998. All Rights Reserved.
As far as patents or other rights of third parties are
concerned, liability is only assumed for components per
se, not for applications, processes and circuits
implemented within components or assemblies.
The information describes the type of component and shall
not be considered as assured characteristics.
Terms of delivery and rights to change design reserved.
For questions on technology, delivery and prices please
contact the Offices of Semiconductor Group in Germany or
the
Infineon
Technologies
Companies
and
Representatives woldwide (see address list).
Due to technical requirements components may contain
dangerous substances. For information on the type in
question please contact your nearest Infineon
Technologies Office, Semiconductor Group.
Infineon Technologies Semiconductors is a certified CECC
and QS9000 manufacturer (this includes ISO 9000).
Semiconductor Group
6 of 6
Draft B, September 99
Similar pages