BXY43 HiRel Silicon PIN Diode • HiRel Discrete and Microwave Semiconductor • Current controlled RF resistor for RF attenuators and switches • High reverse voltage • Hermetically sealed microwave package • Space Qualified ESA/SCC Detail Spec. No.: 5513/030 Type Variant No.s 01 to 03 T T1 P1 FP ESD: Electrostatic discharge sensitive device, observe handling precautions! Type BXY43-T (ql) Marking - Ordering Code see below Pin Configuration Package 1 2 T BXY43-T1 (ql) 1 2 T1 BXY43-P1 (ql) 1 2 T2 BXY43-FP (ql) 1 1' FP 2 (ql) Quality Level: P: Professional Quality, Ordering Code: Q62702X151 H: High Rel Quality, Ordering Code: on request S: Space Quality, Ordering Code: on request ES: ESA Space Quality, Ordering Code: Q62702X169 (see order instructions for ordering example) Semiconductor Group 1 of 6 Draft B, September 99 BXY43 Maximum Ratings Parameter Symbol Reverse Voltage VR 150 V IF 400 mA Ptot 500 mW Operating Temperature Range Top -55 to +150 °C Storage Temperature Range Tstg -65 to +175 °C Soldering Temperature 2) Tsol +235 °C Junction Temperature Tj 150 °C Thermal Resistance Junction-Case Rth(j-c) Forward Current Power Dissipation 1) Values Unit K/W 100 BXY43-T 125 BXY43-T1 90 BXY43-P1 100 BXY43-FP Notes.: 1.) For BXY43-T: At TCASE = 100 °C. For TCASE > 100 °C derating is required. For BXY43-T1: At TCASE = 87,5 °C. For TCASE > 87,5 °C derating is required. For BXY43-P1: At TCASE = 105 °C. For TCASE > 105 °C derating is required. For BXY43-FP: At TCASE = 100 °C. For TCASE > 100 °C derating is required. 2.) During 5 sec. maximum. The same terminal shall not be resoldered until 5 minutes have elapsed. Electrical Characteristics at TA=25°C; unless otherwise specified Parameter Symbol Values Unit min. typ. max. IR1 - - 100 nA IR2 - - 10 nA VF - 0,97 1 V DC Characteristics Reverse Current 1 VR1=150V Reverse Current 2 VR2=100V Forward Voltage IF=100mA Semiconductor Group 2 of 6 Draft B, September 99 BXY43 Electrical Characteristics (continued) Parameter Symbol Values min. typ. Unit max. AC Characteristics Total Capacitance pF CT VR=50V; f=1MHz BXY43-T, -T1 - 0,3 0,45 BXY43-P1 0,3 0,50 0,75 BXY43-FP 0,4 0,6 0,85 RF1 - 55 70 Ω RF2 - 2,2 3,0 Ω RF3 - 0,9 1,5 Ω τL 250 650 Forward Resistance 1 f=100MHz, IF1=20µA Forward Resistance 2 f=100MHz, IF2=1mA Forward Resistance 3 f=100MHz, IF3=10mA Minority Carrier Lifetime ns IF=10mA, IR=6mA, IR=3mA Semiconductor Group 3 of 6 Draft B, September 99 BXY43 Order Instructions: Full type variant including package variant and quality level must be specified by the orderer. For HiRel Discrete and Microwave Semiconductors the ordering code specifies device family and quality level only. Ordering Form: Ordering Code: Q.......... BXY43- (x) (ql) (x): Package Variant (ql): Quality Level Ordering Example: Ordering Code: Q62702X169 BXY43-T1 ES For BXY43 in T1 Package; ESA Space Quality Level Further Informations: See our WWW-Pages: - Discrete and RF-Semiconductors (Small Signal Semiconductors) www.infineon.com/products/discrete/hirel.htm - HiRel Discrete and Microwave Semiconductors www.infineon.com/products/discrete/hirel.htm Please contact also our marketing division : Tel.: Fax.: e-mail: Address: Semiconductor Group ++89 234 24480 ++89 234 25568 [email protected] Infineon Technologies Semiconductors, High Frequency Products Marketing, P.O.Box 801709, D-81617 Munich 4 of 6 Draft B, September 99 BXY43 T Package B X1 A C Y1 Symbol Y2 A B C 2 1 Millimetre min max 1,30 1,45 1,15 1,35 0,40 T1 Package X1 B Y1 A Y2 Symbol C A B C D E F G H 2 1 D F E H G G Millimetre min max 1,30 1,45 1,15 1,35 0,40 0,10 0,50 0,30 0,06 0,10 5,50 0,40 0,60 P1 Package Symbol X1 Cathode Y1 ∅A ∅B C D Y2 2 1 D Millimetre min max 2,0 2,2 3,0 3,2 1,45 1,7 0,4 0,6 A C Semiconductor Group B 5 of 6 Draft B, September 99 BXY43 FP Package Y1 L B B1 Symbol L X1 d B B1 D D1 d d1 F L D D1 Y2 2 1 1' d1 F n.c. Millimetre min max 3,10 3,55 3,00 3,30 1,30 1,70 0,55 0,65 0,10 0,15 0,25 0,40 2,40 2,60 5,50 - n.c. Published by Infineon Technologies Semiconductors, High Frequency Products Marketing, P.O.Box 801709, D-81617 Munich. Infineon Technologies AG 1998. All Rights Reserved. As far as patents or other rights of third parties are concerned, liability is only assumed for components per se, not for applications, processes and circuits implemented within components or assemblies. The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. For questions on technology, delivery and prices please contact the Offices of Semiconductor Group in Germany or the Infineon Technologies Companies and Representatives woldwide (see address list). Due to technical requirements components may contain dangerous substances. For information on the type in question please contact your nearest Infineon Technologies Office, Semiconductor Group. Infineon Technologies Semiconductors is a certified CECC and QS9000 manufacturer (this includes ISO 9000). Semiconductor Group 6 of 6 Draft B, September 99