SP-Cap/ Conductive Polymer Aluminum Capacitors (Specialty Polymer Aluminum Capacitors) Surface Mount Type Series: SS, ST, LS, LT, CS, CT ■ Features ● Low profile 1.1 mm, 1.4 mm ● Low ESR(6 m), Large capacitance (SS, ST, LS, LT series) ● Low ESL by structure of SP-Cap 50% ESL of current products. (LS, LT series) ● High temperature reflow soldering applicable. (Peak : 260 °C 10s, main heating : 230 °C 40s) ● RoHS directive compliant ■ Specifications SS Series & Size Code Category Temp. Range Rated W.V.Range Nominal Cap.Range ST LS LT CS CT –40 °C to +105 °C 2 V.DC to 2.5 V.DC 4 V.DC to 6.3 V.DC 180 µF to 220 µF 270 µF to 330 µF 180 µF to 220 µF 270 µF to 330 µF 68 µF to 120 µF 100 µF to 180 µF Capacitance Tolerance ±20 % (120 Hz / + 20 °C) DC Leakage Current I < 0.1 CV (µA) 2minutes tan δ < 0.06 (120 Hz/+20 °C) Rated Working Voltage 1.25 (15 °C to 35 °C) After applying rated working voltage for 1000 hours at 105 °C±2 °C, and then being stabilized at +20 °C, capacitor shall meet the following limits. Capacitance change ±10% of initial measured value Surge Voltage Endurance tan δ < Initial specified value < Initial specified value DC leakage current After storing for 500 hours at 60 °C, 90 % Capacitance change of initial measurd value Moisture resistance 2, 2.5 V.DC 4 V.DC 6.3 V.DC +70, –20 % +60, –20 % +50, –20 % tan δ < 200 % of initial specified value DC leakage current < Initial specified value ■ Marking Cap. Lot No. ■ Dimensions in mm(not to scale) Polarity bar (Positive) W.V. code (Unit : mm) SS, ST, CS, CT series (Unit : mm) LS, LT series + + H H - L P P L W1 W2 P1 L±0.2 7.3 7.3 W1±0.2 W2±0.1 4.3 4.3 ✽ Externals of figure are the reference. 2.4 2.4 + W2 W2 W2 - Series & Size Code SS, CS ST, CT W1 P4 H±0.1 P±0.3 1.1 1.4 1.3 1.3 P3 P2 P1 Series & L±0.2 W1±0.2 W2±0.1 H±0.1 P1±0.3 P2±0.1 P3±0.2 P4±0.2 Size Code LS 7.3 4.3 2.4 1.1 1.3 1.1 0.7 1.4 LT 7.3 4.3 2.4 1.4 1.3 1.1 0.7 1.4 ✽ Externals of figure are the reference. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – EEF-2 – 00 Nov. 2012 SP-Cap/ Conductive Polymer Aluminum Capacitors (Specialty Polymer Aluminum Capacitors) ■ Standard Products Series & Size Code SS ST LS LT CS CT CapaciRated tance W.V. (±20 %) L (V.DC) (µF) (mm) 2 2.5 2 2.5 2 2.5 2 2.5 4 6.3 4 6.3 220 180 330 270 220 180 330 270 120 68 180 100 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 Case Size Specification ✽1 W (mm) H (mm) 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 1.1 1.1 1.4 1.4 1.1 1.1 1.4 1.4 1.1 1.1 1.4 1.4 Part number ✽2 Ripple ESR current (Ar.m.s.) (m max.) 3.5 6 3.5 6 3.5 6 3.5 6 3.5 6 3.5 6 3.5 6 3.5 6 2.7 15 2.7 15 2.7 15 2.7 15 ✽3 Reflow condition : 260 °C The number of terminals 2 EEFSS0D221R EEFSS0E181R EEFST0D331R EEFST0E271R EEFLS0D221R EEFLS0E181R EEFLT0D331R EEFLT0E271R EEFCS0G121R EEFCS0J680R EEFCT0G181R EEFCT0J101R 3 쑗 쑗 쑗 쑗 쑗 쑗 쑗 쑗 쑗 쑗 쑗 쑗 Min. Packaging Q’ty (pcs) 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 ✽1: Ripple current (100 kHz/ +20 to +105 °C ), ✽2: ESR (100 kHz/+20 °C) ✽3: Please refer to the page of “Mouting Specifications”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – EEF-3 – 00 Nov. 2012