Surface Mount Power Splitter/Combiner 2 Way-0° 75Ω 5 to 1000 MHz Maximum Ratings Operating Temperature Storage Temperature Features • wideband, 5 to 1000 MHz • low insertion loss, 0.3 dB typ. • aqueous washable • protected under U.S. Patent 6,133,525 -40°C to 85°C -55°C to 100°C Power Input (as a splitter) Internal Dissipation ADP-2-10W-75+ 0.5W max. 0.125W max. • cellular • VHF/UHF • communication systems • CATV Pin Connections 1 PORT 1 3 PORT 2 4 GROUND 6 NOT USED +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Applications Permanent damage may occur if any of these limits are exceeded. SUM PORT CASE STYLE: CD636 FREQ. RANGE (MHz) 2,5 Outline Drawing Reel Size 7” 13” Electrical Specifications ISOLATION (dB) L INSERTION LOSS (dB) ABOVE 3.0 dB M U L M PHASE UNBALANCE (Degrees) U fL-fU Typ. Min Typ. Min Typ. Min Typ. Max. Typ. Max. Typ. Max. 5-1000 24 14 23 18 24 18 0.2 L = low range [fL to 10 fL] e and Reel Available Tapra cost at no ext Devices/Reel 10, 20, 50, 100, 200, 500 500, 1000 0.6 M = mid range [10 fL to fU/2] 0.3 0.9 0.5 AMPLITUDE UNBALANCE (dB) L M U L M U Max. Max. Max. Max. Max. Max. 1.0 3.0 5.0 0.1 0.2 0.3 1.1 U = upper range [fU/2 to fU] Typical Performance Data Frequency (MHz) D .100 2.54 H .030 0.76 J .026 0.66 K .065 1.65 L .300 7.62 E .162 4.11 F .055 1.40 G .100 2.54 VSWR S VSWR 1 VSWR 2 S-1 S-2 3.24 3.21 3.21 3.21 3.21 0.01 0.00 0.01 0.00 0.00 21.20 24.46 24.61 24.23 23.86 0.03 0.01 0.06 0.07 0.16 1.08 1.06 1.06 1.06 1.06 1.24 1.15 1.15 1.15 1.16 1.24 1.15 1.14 1.15 1.16 50.00 140.00 230.00 320.00 410.00 3.22 3.25 3.28 3.31 3.35 3.22 3.26 3.28 3.33 3.36 0.01 0.00 0.00 0.02 0.01 23.55 22.59 22.63 22.95 23.35 0.12 0.38 0.64 0.87 1.06 1.06 1.06 1.07 1.07 1.07 1.16 1.19 1.20 1.20 1.19 1.16 1.18 1.18 1.17 1.15 500.00 625.00 750.00 875.00 1000.00 3.38 3.41 3.47 3.55 3.66 3.40 3.46 3.52 3.60 3.72 0.02 0.05 0.05 0.06 0.06 23.72 23.96 23.86 23.54 23.25 1.27 1.61 1.85 2.10 2.21 1.06 1.04 1.02 1.05 1.11 1.19 1.18 1.16 1.14 1.12 1.14 1.11 1.07 1.04 1.04 1. Total Loss = Insertion Loss + 3dB splitter loss. wt grams 0.25 Demo Board MCL P/N: TB-243 Suggested PCB Layout (PL-141) Phase Unbalance (deg.) ADP-2-10W-75+ TOTAL LOSS 4.0 S-1(dB) 3.8 S-2(dB) 3.6 3.4 3.2 3.0 30 25 20 15 10 0 200 400 600 800 1000 FREQUENCY (MHz) #S-VSWR #1-VSWR 0 200 400 600 800 1000 FREQUENCY(MHz) ADP-2-10W-75+ VSWR 1.3 ADP-2-10W-75+ ISOLATION 35 ISOLATION (dB) C .220 5.59 TOTAL LOSS (dB) B .310 7.87 Isolation (dB) 3.23 3.21 3.20 3.21 3.22 Suggested Layout, Tolerance to be within ± � .002 A .272 6.91 Amplitude Unbalance (dB) 5.00 14.00 23.00 32.00 41.00 PCB Land Pattern Outline Dimensions ( inch mm ) Total Loss1 (dB) electrical schematic #2-VSWR VSWR 1.2 1.1 1.0 0 200 400 600 800 1000 FREQUENCY (MHz) Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] REV. E M158496 ADP-2-10W-75+ DY/TD/CP/AM 171019 Page 1 of 1