ITT FOMC6-2W2F0 Fiber optic multi-channel connector Datasheet

Fiber Optic Multi-Channel Connectors
FOMC
ITT Cannon's EOMC Series Fiber Optic connectors
are designed to meet the needs of military and
commercial customers who require a rugged environmental multifiber field connector. The FOMC
combines features which provide the user with a
connector that will withstand rough handling and
weather extremes with features of elastomeric
cable and interface sealing, scoop proof interface
to prevent optical contact damage, removable front
insert for easy optical contact cleaning, anodized
shell finish, and a tough, strong dust cap with
attaching stainless steel strap.
Hermaphroditic design means plugs will mate with
an identical plug as well as receptacles. The removable insert assures correcting mating and alignment. In
the FOMC, ruggedness is combined with good
optical perfomance, rapid coupling and attractive
pricing. Another plus feature for ITT Cannon's
FOMC design is the fiber flexure chamber which
prevents tensile loads from being applied to the
terminated fiber. The chamber provides space for
surplus fiber in a service loop of sufficient lenght to
permit one retemination of one or more fibers in
the plug and cable receptacle without reterminating
the strength member at the same time. This versatility is an ITT Cannon exclusive.
The FOMC 2, 4, and 8 channel connector are
available as a cable plug, and several receptacle
shell configurations. The 8 channel can also be used
with less contacts i.e. 6,4, or 2 channels. Sealing
plugs are supplied with the 8 channel connector
when using less than the full complement of contacts. This catalog provides complete ordering information on available shell types, contact layouts,
fiber and cable dimensional and mechanical parameters.
State-of-the-art ceramic alignment tips on the contact provide maximum coupling performance - less than
1.0 dB average coupling less.
Standard Data
Fungus inert per requirement 4 of MIL-STD-454 Fluid resistant (elastomeric materials) per
MIL-H-5606-Hydraulic fluid, petroleum base
MIL-L7808-Lubricating oil, synthetic base
MIL-G-3056-Gasoline
MIL-A-8243-Ethelyne gylcol
Description
Materials
Shell Hardware
Aluminum Alloy
Cable Clamp
Aluminum Alloy
Insert, Front Removable
Thermoplastic
Interfacial Seal
Elastomer
Cable Seal
Elastomer
O Rings
Elastomer
Alignment Guide
Thermoplastic
Strain Relief Spring
Stell wire with black chrome finish
Mandrel/Yoke
Thermoplastic
Receptacle Yoke
Thermoplastic
Dust Cap
Elastomer
Marking
Laser with clear chromate over exposed base metal
Contact Arrangements
Face Veiw of Insert
2 and 4 Channel
8 Channel
F2
F1
M1
F1
M1
F3
F1
F4
M1
M4
F2
M2
M2
M3
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
www.ittcannon.com
299
Fiber Optic Multi-Channel Connectors
FOMC
How to Order
FOMC
SERIES
6-
2
W
2
C
*
***
SERIES
Fiber Optic Multi-Channel
SHELL STYLE
SHELL STYLE
2 - Square Flange Receptcale
(2/4) channel only)
6 - Cable Plug
7 - Jam Nut Receptacle
SHELL SIZE
DUST CAP
CABLE TYPE
SHELL SIZE (Channels)
CABLE SIZE (O.D)
(Maximum number of contact positions)
2
4
8
POLARIZATION POSITION
MODIFICATION CODES
CABLE SIZE (O.D)
DUST CAP
W - Connector supplied with dust cap
X - Without dust cap
POLARIZATION
A - .190 +_.015 (4.83 +_.38)
D - .236 +_.019 (6.0 +_.5)
F - .276 +_.015 (7.0 +_.4)
G - .374 +_.015 (9.50 +_.38)*
H - .500 +_.015 (12.70 +_.38)*
P - Pigtail buffered fiber
CABLE TYPE
1 - Pigtail buffered fiber (receptacle only)
2 - Multi fiber strengthened cable
3 - Singel fiber strengthned cables (8 channel
only)
(8 channel plug only. Omit for 2/4 channel)
0 - Not polarized
1 thru 6 - key position
MODIFICATION CODES
Consult factory
*NOTE: Cable size G and H are for 8 channel FOMC Connector
only
2 and 4 Channel
Square Flange
Receptacle
FOMC 2
3.700 (93.98)
.130
(3.30)
1.395
(35.43)
Millimeters are in parenthesis
1.480
(37.60)
2.40
(60.96)
1.064 (BSC
.(27.03)
1.064 (BSC
(27.03)
1.480 (37.60)
.128
(3.25) Dia.
4 Holes
Ø .013
.150 (3.81) Max. Panel
Plug
FOMC 6
3.700 (93.98)
2.40
(60.96)
Shell
End Nut
1.175 Dia.
(29.845)
Cable Strain
Relief
Connector Identification
And Mating Instructions
Front Removable insert
Jam Nut Receptacle
.764
(19.41)
FOMC 7
1.395
(35.43)
3.700
(93.98)
.130
(3.30)
1.395
(35.43)
.130
(3.30)
2.40
(60.96)
.945 Dia.
(24.00)
Shell
1.505 Dia
(38.23)
1
(3 .44
6. 0
58
)
Jam Nut
Front Removable Insert
1.150
(29.21)
Yoke Tabs
Rear Removable Yoke
(Optical Contact Retainer)
.150 (3.81) Max. Panel
.150 (3.81) Max. Panel
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
www.ittcannon.com
300
Fiber Optic Multi-Channel Connectors
FOMC
8 Channel
Square Flange Receptacle
FOMC 2
3.96 (100.5)
2.50 BSC (63.5)
2.0 BSC (50.8)
2.02 (51.2)
.193 (4.9)
2.64 (67.1)
2.500 (63.5)
.255 DIA. (6.35)
4 HOLES
Ø.015
2.00 (50.8)
1.98 DIA. (50.4)
1.76 DIA. (44.7)
Plug
FOMC 6
2.64
(67.1)
5.98 (151.8)
5.28 (134.0)
1.76 DIA.
(44.7)
2.03 DIA.
(51.6)
Jam Nut Receptacle
FOMC 7
5.24 (133.0)
.800 (20.3)
3.22
(81.8)
.193 (4.9)
.193
(4.9)
2.02
(51.2)
2.02
(51.2)
1.32
(33.5)
O-Ring
2.500 DIA.
(63.5)
1.700 Dia.
(43.2)
1.76 Dia.
(44.7)
.
IA
D
2
)
36 .0
2. (60
Removable Front Insert
M48 x 1.5-6g thd.
.200 (5.1) Max. Panel
M48 x 1.5-6g Thd.
.200 (5.1) Max. Panel
Jarn Nut
3.96 (100.5)
Polarizing
Flanges
2.02
(51.2)
2.64 (67.1)
.193 (4.9)
2.500 DIA.
(63.5)
1.76 Dia.
(44.7)
.
IA
D
2
)
36 .0
2. (60
M48 x 1.5-6g Thd.
.200 (5.1) Max. Panel
Recommended Panel Cutouts
2 and 4 Channel
FOMC 2
1.073 +.010
-.000
(27.25 + 0.25)
-0.00)
DIA
1.064
BSC
(27.03)
Ø.005
.126 +_ .002 DIA.
CSK 82˚ x .230 +_ .005
1.064 BSC
(27.03)
8 Channel
FOMC 7
FOMC 2
1.016 + .000
-.005
(25.80 + 0.00
-0.13)
FOMC 7
+.015
Ø2.000 -.000
2.000 (50.8)
(50.8 +.038
-.0.0)
1.821 + .005
-.000
(48.25 + 0.13)
-0.00)
Ø.253 +_ .002
Ø.005
CSK B2˚ x .507+/- .010
1.073 + .010 Dia. (27.25 + 0.25)
-.000
-.000)
2.000 BSC (50.8)
1.890 Dia. (48.00 + 0.25)
+.010
-.000)
-.000
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
www.ittcannon.com
301
Fiber Optic Multi-Channel Connectors
FOMC
Contact Assembly
TIP,
TERMINUS
FERRULE,
OPTICAL
"O" RING,
FRONT
SPRING
BODY. REAR
FERRULE
"O" RING
REAR
TUBE,
SUPPORT
∆ TIP I.D.
.175 (4.44)
MAX. DIA.
1.300 (33.02) MAX.
.170 (4.32)
MAX. DIA.
.230
(5.84)
MAX.
DIA.
FIBER BUFFER DIA
How to Order - Contacts
FOMC
-
T
-
10
- 1270
ITT CANNON SERIES
TERMINUS ASSEMBLY
BUFFER DIAMETER
TIP
TIP (I.D. in tenths of microns)
SERIES
FOMC - Fiber Optic Multi-Channel
1270 - 127.0 µm min.
1300 - 130.0 µm min.
1440 - 144.0 µm min.
TERMINUS ASSEMBLY
BUFFER DIAMETER (in millimeters)
05 - 0.5 mm Buffer
10 - 1.0 mm Buffer
11 - 1.1 mm Buffer
Coupling Performance
TOTAL SAMPLES = 3056
MEAN = 0.93
SID. DEV. = 0.32
MINIMUM = 0
MAXIMUM = 2.2
900
800
50/125 FIBER
CERAMIC ALIGNMENT TIP CONTACTS
700
FREQUENCY
600
500
400
300
200
100
0
0
0.5
1
1.5
2
2.5
CONNECTOR LOSS (dB)
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
www.ittcannon.com
302
Fiber Optic Cable Assemblies
ITT Cannon is a major supplier of fiber optic cable
assemblies for mulit channel tactical ground based
and avionics appliations. Experienced includes de-
livery of more than 20,000 custom fiber optic links
over the past twelve years. Cable assemblies are
built to specific design requirements and are 100%
optically tested.
FOMC
TERMINATED CABLE LENTGH
FOMC Plug-to-Plug Assembly
TERMINATED ASSEMBLY LENTGH
PIGTAIL CONNECTORS
(SMA.ST® CONNECTORS)
*
FOMC Receptacle/Pigtail Assembly
*ST is a trademark of AT&T
FOHC
TERMINATED LENTGH
INDIVIDUAL SINGLEFIBER CABLES
(NYLON BRAIDED SLEEVE)
MARKING
SLEEVE
CONNECTOR
ASSY
MULTI-FIBER
TACTICAL CABLE
BACKSHELL
DUST CAP
38999 F.O. Plug-to Plug Assembly
TERMINATED LENTGH
MARKING SLEEVE
CABLES
CONNECTOR ASSY
PIGTAIL CONNECTORS *
(SMA.ST® CONNECTORS)
DUST CAP
38999 F.O. Receptacle/Pigtail Assembly
*ST is a trademark of AT&T
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
www.ittcannon.com
303
Similar pages