LQM21PN3R3NG0# “#” indicates a package specification code. < List of part numbers with package codes > LQM21PN3R3NG0D , LQM21PN3R3NG0B Shape Notes In operating temperature exceeding +85℃, derating of current is necessary for LQM21P̲G0 series. Please apply the derating curve shown in chart according to the operating temperature. Please confirm the below "Notice (Rating)". When applied Rated current to the Products, temperature rise caused by self-generated heat shall be limited to 40 ℃ max. References Packaging code L size 2.0 ±0.15mm W size 1.25 ±0.15mm T size 0.9 ±0.1mm Size code in inch (mm) 0805 (2012) Specifications Minimum quantity φ180mm Paper taping 4000 Packing in bulk 1000 Mass (Typ.) 1 piece 0.012g Specifications Inductance 3.3µH ±30% Inductance test frequency 1MHz Rated current (Itemp) (Based on Temperature rise) 0.8A(Ambient temperature 85℃) 0.55A(Ambient temperature 125℃) Max. of DC resistance 0.207Ω Avg. of DC resistance 0.165Ω(typ.) Self resonance frequency (min.) 30MHz Operating temperature range -55〜125℃ Class of magnetic shield Magnetic shield of ferrite 1 of 2 1.This datasheet is downloaded from the website of Murata Manufacturing Co., Ltd. Therefore, itʼs specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2.This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. URL : http://www.murata.com/ Last updated: 2016/04/20 Chart of characteristic data (The charts below may show another part number which shares its characteristics.) Inductance-Frequency characteristics (Typ.) Inductance-Current characteristics (Typ.) Temperature rise characteristics (Typ.) Notice (Rating) 2 of 2 This PDF data has only typical specifications because there is no space for detailed specifications. Therefore, please reviewour product specifications or consult the approval sheet for product specifications before ordering. Last updated: 2016/04/20