Product Folder Sample & Buy Support & Community Tools & Software Technical Documents CSD95378BQ5M SLPS504A – APRIL 2014 – REVISED JULY 2014 CSD95378BQ5M Synchronous Buck NexFET™ Smart Power Stage 1 Features 2 Applications • • • • • • • 1 • • • • • • • • • • • 60 A Continuous Operating Current Capability 93.4% System Efficiency at 30 A Low Power Loss of 2.8 W at 30 A High Frequency Operation (up to 1.25 MHz) Diode Emulation Mode With FCCM Temperature Compensated Bi-Directional Current Sense Analog Temperature Output (400 mV at 0°C) Fault Monitoring – Highside Short, Overcurrent, and Overtemperature Protection 3.3 V and 5 V PWM Signal Compatible Tri-State PWM Input Integrated Bootstrap Diode Optimized Deadtime for Shoot Through Protection High Density SON 5 × 6 mm Footprint Ultra-Low Inductance Package System Optimized PCB Footprint RoHS Compliant – Lead-Free Terminal Plating Halogen Free Multiphase Synchronous Buck Converters – High Frequency Applications – High Current, Low Duty Cycle Applications POL DC-DC Converters Memory and Graphic Cards Desktop and Server VR11.x / VR12.x V-core and Memory Synchronous Converters • • • 3 Description The CSD95378BQ5M NexFET™ smart power stage is a highly optimized design for use in a high-power, high-density synchronous buck converter. This product integrates the driver IC and power MOSFETs to complete the power stage switching function. This combination produces high-current, high-efficiency, and high speed switching capability in a small 5 mm × 6 mm outline package. It also integrates the accurate current sensing and temperature sensing functionality to simplify system design and improve accuracy. In addition, the PCB footprint is optimized to help reduce design time and simplify the completion of the overall system design. Device Information(1) Device Media Qty Package Ship CSD95378BQ5M 13-Inch Reel 2500 CSD95378BQ5MT 7-Inch Reel 250 SON 5- × 6mm Package Tape and Reel (1) For all available packages, see the orderable addendum at the end of the data sheet. SPACER SPACER Application Diagram Typical Power Stage Efficiency and Power Loss VIN 100 14 90 12 80 10 VCC VCC VOUT 60 30 +Is2 -Is2 PWM2 RT 6 4 2 40 TSEN SS 8 VDD = 5V VIN = 12V VOUT = 1.2V LOUT = .225µH fSW = 500kHz TA = 25ºC 50 PWM1 +Is1 -Is2 VOUT 70 Power Loss (W) VOUT Efficiency (%) CSD95378B 0 10 20 30 40 Output Current (A) 50 60 0 G001 PGND Multiphase Controller CSD95378B 1 An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications, intellectual property matters and other important disclaimers. PRODUCTION DATA. CSD95378BQ5M SLPS504A – APRIL 2014 – REVISED JULY 2014 www.ti.com Table of Contents 1 2 3 4 5 6 Features .................................................................. Applications ........................................................... Description ............................................................. Revision History..................................................... Pin Configuration and Functions ......................... Specifications......................................................... 1 1 1 2 3 4 6.1 6.2 6.3 6.4 4 4 4 4 Absolute Maximum Ratings ...................................... Handling Ratings....................................................... Recommended Operating Conditions....................... Thermal Information .................................................. 7 8 Application Schematic .......................................... 5 Device and Documentation Support.................... 6 8.1 Trademarks ............................................................... 6 8.2 Electrostatic Discharge Caution ................................ 6 8.3 Glossary .................................................................... 6 9 Mechanical, Packaging, and Orderable Information ............................................................. 7 9.1 Mechanical Drawing.................................................. 7 9.2 Recommended PCB Land Pattern............................ 8 9.3 Recommended Stencil Opening ............................... 8 4 Revision History Changes from Original (April 2014) to Revision A • 2 Page Updated the controller IC in the Application Schematic to the TPS40428 ............................................................................. 5 Submit Documentation Feedback Copyright © 2014, Texas Instruments Incorporated Product Folder Links: CSD95378BQ5M CSD95378BQ5M www.ti.com SLPS504A – APRIL 2014 – REVISED JULY 2014 5 Pin Configuration and Functions 13-Pin SON Top View IOUT 1 12 PWM REFIN 2 11 TAO/FAULT ENABLE 3 10 FCCM PGND 4 9 BOOT VDD 5 8 BOOT_R VSW 6 7 VIN 13 PGND Pin Functions PIN NAME DESCRIPTION NUMBER BOOT 9 Bootstrap capacitor connection. Connect a minimum of 0.1-µF 16 V X7R ceramic capacitor from BOOT to BOOT_R pins. The bootstrap capacitor provides the charge to turn on the control FET. The bootstrap diode is integrated. BOOT_R 8 Return path for HS gate driver, connected to VSW internally. ENABLE 3 Enables device operation. If ENABLE = logic HIGH, turns on device. If ENABLE = logic LOW, the device is turned off and both MOSFET gates are actively pulled low. An internal 100-kΩ pulldown resistor will pull the ENABLE pin LOW if left floating. FCCM 10 This pin enables the Diode Emulation function. When this pin is held LOW, Diode Emulation Mode is enabled for Sync FET. When FCCM is HIGH, the device is operated in Forced Continuous Conduction Mode. An internal 5µA current source will pull the FCCM pin to 3.3 V if left floating. IOUT 1 Output of current sensing amplifier. V(IOUT) – V(REFIN) is proportional to the phase current. PGND 4 Power ground, connected directly to pin 13. PGND 13 Power ground. PWM 12 Pulse width modulated tri-state input from external controller. Logic LOW sets control FET gate low and sync FET gate high. Logic HIGH sets control FET gate high and sync FET gate low. Open or High Z sets both MOSFET gates low if greater than the tri-state shutdown hold-off time (t3HT). REFIN 2 External reference voltage input for current sensing amplifier. TAO/ FAULT 11 Temperature analog output. Reports a voltage proportional to the die temperature. An ORing diode is integrated in the IC. When used in multiphase application, a single wire can be used to connect the TAO pins of all the ICs. Only the highest temperature will be reported. TAO will be pulled up to 3.3 V if thermal shutdown occurs. TAO should be bypassed to PGND with a 1 nF 16 V X7R ceramic capacitor. VDD 5 Supply voltage to gate driver and internal circuitry. VIN 7 Input voltage pin. Connect input capacitors close to this pin. VSW 6 Phase node connecting the HS MOSFET source and LS MOSFET drain - pin connection to the output inductor. Submit Documentation Feedback Copyright © 2014, Texas Instruments Incorporated Product Folder Links: CSD95378BQ5M 3 CSD95378BQ5M SLPS504A – APRIL 2014 – REVISED JULY 2014 www.ti.com 6 Specifications 6.1 Absolute Maximum Ratings TA = 25°C (unless otherwise noted) (1) MIN MAX VIN to PGND –0.3 25 V VIN to VSW –0.3 25 V –7 27 V –0.3 20 V VIN to VSW (10 ns) VSW to PGND VSW to PGND (10 ns) UNIT –7 23 V VDD to PGND –0.3 7 V ENABLE, PWM, FCCM. TAO, IOUT, REFIN to PGND –0.3 VDD + 0.3 V V –0.3 VDD + 0.3 V V 12 W 150 °C BOOT to BOOT_R (2) PD, Power Dissipation TJ, Operating Junction (1) (2) –55 Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated is not implied. Exposure to absolutemaximum-rated conditions for extended periods may affect device reliability. Should not exceed 7 V. 6.2 Handling Ratings Tstg MIN MAX UNIT –55 150 °C Human Body Model (HBM) –2000 2000 Charged Device Model (CDM) –500 500 Storage Temperature Range ESD Rating V 6.3 Recommended Operating Conditions TA = 25° (unless otherwise noted) MIN MAX 4.5 5.5 V Input Supply Voltage (1) 16 V VOUT Output Voltage 5.5 V IOUT Continuous Output Current IOUT-PK Peak Output Current (3) VIN = 12 V, VDD = 5 V, VOUT = 1.2 V, ƒSW = 500 kHz, LOUT = 0.225 µH (2) ƒSW Switching Frequency CBST = 0.1 µF (min) On Time Duty Cycle ƒSW = 1 MHz VDD Gate Drive Voltage VIN (1) (2) (3) UNIT 60 90 A 1250 kHz 85 Minimum PWM On Time 40 Operating Temperature –40 % ns 125 °C Operating at high VIN can create excessive AC voltage overshoots on the switch node (VSW) during MOSFET switching transients. For reliable operation, the switch node (VSW) to ground voltage must remain at or below the Absolute Maximum Ratings. Measurement made with six 10-µF (TDK C3216X5R1C106KT or equivalent) ceramic capacitors placed across VIN to PGND pins. System conditions as defined in Note 1. Peak Output Current is applied for tp = 50 µs. 6.4 Thermal Information TA = 25°C (unless otherwise noted) THERMAL METRIC MIN TYP MAX RθJC Junction-to-Case (Top of package) Thermal Resistance (1) 15 RθJB Junction-to-Board Thermal Resistance (2) 1.5 (1) (2) 4 UNIT °C/W RθJC is determined with the device mounted on a 1-inch² (6.45 -cm²), 2-oz (.071-mm thick) Cu pad on a 1.5-inches x 1.5-inches, 0.06inch (1.52-mm) thick FR4 board. RθJB value based on hottest board temperature within 1 mm of the package. Submit Documentation Feedback Copyright © 2014, Texas Instruments Incorporated Product Folder Links: CSD95378BQ5M CSD95378BQ5M www.ti.com SLPS504A – APRIL 2014 – REVISED JULY 2014 7 Application Schematic 12V VDD BP3 BP5 VIN PWM PWM2 BOOT CSD95378B FCCM TPS40428 FLT2 FLT1 ISH1 ISH2 ISH1 VSNS1 GSNS1 CS2N VSW VOUT LOAD PGND VDD 5V FLT1 BOOT_R TAO/FAULT ENABLE PGND IMON REFIN CS2P FB2 FB2 COMP2 DIFFO1 BP5 COMP1 PG2 PG2 CNTL2 12V FB1 VIN PWM1 COMP1 RT PG1 CNTL1 BOOT PWM FCCM 5V VDD ENABLE BOOT_R TAO/FAULT CSD95378B VSW PGND PGND IMON REFIN SYNC CS1P PHSET CS1N VSNS2 GSNS2 PMBDATA TSNS1 SVID1 TSNS2 PMBCLK PMBUS I/F SMBALERT ADDR0 ADDR1 AGND AVSDATA1 AVSCLK1 VIO High-Speed AVSBUS Submit Documentation Feedback Copyright © 2014, Texas Instruments Incorporated Product Folder Links: CSD95378BQ5M 5 CSD95378BQ5M SLPS504A – APRIL 2014 – REVISED JULY 2014 www.ti.com 8 Device and Documentation Support 8.1 Trademarks NexFET is a trademark of Texas Instruments. 8.2 Electrostatic Discharge Caution This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications. 8.3 Glossary SLYZ022 — TI Glossary. This glossary lists and explains terms, acronyms, and definitions. 6 Submit Documentation Feedback Copyright © 2014, Texas Instruments Incorporated Product Folder Links: CSD95378BQ5M CSD95378BQ5M www.ti.com SLPS504A – APRIL 2014 – REVISED JULY 2014 9 Mechanical, Packaging, and Orderable Information The following pages include mechanical packaging and orderable information. This information is the most current data available for the designated devices. This data is subject to change without notice and revision of this document. For browser-based versions of this data sheet, refer to the left-hand navigation. 9.1 Mechanical Drawing Exposed tie clip may vary c2 A E1 E2 c1 Ɵ K d2 d1 L1 b3 b1 b2 E D2 b e a1 DIM 0.300 x 45° MILLIMETERS L d INCHES MIN NOM MAX MIN NOM MAX A 1.400 1.450 1.500 0.057 0.059 0.061 a1 0.000 0.000 0.050 0.000 0.000 0.002 b 0.200 0.250 0.320 0.008 0.010 0.013 b1 b2 2.750 TYP 0.200 b3 0.250 0.108 TYP 0.320 0.008 0.250 TYP 0.010 0.013 0.010 TYP c1 0.150 0.200 0.250 0.006 0.008 0.010 c2 0.200 0.250 0.300 0.008 0.010 0.012 D2 5.300 5.400 5.500 0.209 0.213 0.217 d 0.200 0.250 0.300 0.008 0.010 0.012 d1 0.350 0.400 0.450 0.014 0.016 0.018 d2 1.900 2.000 2.100 0.075 0.079 0.083 E 5.900 6.000 6.100 0.232 0.236 0.240 E1 4.900 5.000 5.100 0.193 0.197 0.201 E2 3.200 3.300 3.400 0.126 0.130 0.134 e 0.500 TYP K 0.350 TYP 0.020 TYP 0.014 TYP L 0.400 0.500 0.600 0.016 0.020 0.024 L1 0.210 0.310 0.410 0.008 0.012 0.016 θ 0.00 — — 0.00 — — Submit Documentation Feedback Copyright © 2014, Texas Instruments Incorporated Product Folder Links: CSD95378BQ5M 7 CSD95378BQ5M SLPS504A – APRIL 2014 – REVISED JULY 2014 www.ti.com 9.2 Recommended PCB Land Pattern 0.331(0.013) 0.370 (0.015) 0.410 (0.016) 1.000 (0.039) 0.550 (0.022) 0.300 (0.012) 2.800 (0.110) 5.300 (0.209) 6.300 (0.248) 0.500 (0.020) 5.639 (0.222) 0.300 (0.012) R0.127 (R0.005) 3.400 (0.134) 5.900 (0.232) 1. Dimensions are in mm (inches). 9.3 Recommended Stencil Opening 0.350(0.014) 2.750 (0.108) 0.250 (0.010) 1. Dimensions are in mm (inches). 2. Stencil thickness is 100 µm. 8 Submit Documentation Feedback Copyright © 2014, Texas Instruments Incorporated Product Folder Links: CSD95378BQ5M PACKAGE OPTION ADDENDUM www.ti.com 18-May-2015 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (°C) Device Marking (4/5) CSD95378BQ5M ACTIVE LSON-CLIP DQP 12 2500 Pb-Free (RoHS Exempt) CU NIPDAU Level-2-260C-1 YEAR 95378BM CSD95378BQ5MT ACTIVE LSON-CLIP DQP 12 250 Pb-Free (RoHS Exempt) CU NIPDAU Level-2-260C-1 YEAR 95378BM (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. (5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Device Marking for that device. (6) Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish value exceeds the maximum column width. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. Addendum-Page 1 Samples PACKAGE OPTION ADDENDUM www.ti.com 18-May-2015 In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 2 PACKAGE MATERIALS INFORMATION www.ti.com 23-Jun-2014 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant CSD95378BQ5M LSONCLIP DQP 12 2500 330.0 12.4 5.3 6.3 1.8 8.0 12.0 Q1 CSD95378BQ5MT LSONCLIP DQP 12 250 180.0 12.4 5.3 6.3 1.8 8.0 12.0 Q1 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 23-Jun-2014 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) CSD95378BQ5M LSON-CLIP DQP 12 2500 367.0 367.0 35.0 CSD95378BQ5MT LSON-CLIP DQP 12 250 210.0 185.0 35.0 Pack Materials-Page 2 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of non-designated products, TI will not be responsible for any failure to meet ISO/TS16949. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2015, Texas Instruments Incorporated