SUNMATE FR205G Fast recover y glass passivated rectifier diode Datasheet

FR201G - FR207G
FAST RECOVERYGLASS PASSIVATED RECTIFIER DIODES
VOLTAGE RANGE: 50 - 1000V
CURRENT: 2.0 A
Features
!
!
Glass passivated device
Diffused Junction
!
Low Forward Voltage Drop
!
!
High Reliability
High Surge Current Capability
B
A
A
Mechanical Data
!
!
!
!
!
!
C
D
Case:D O - 1 5 Molded Plastic
Terminals: Plated Leads Solderable per
MIL-STD-202, Method 208
Polarity: Cathode Band
Weight: 0.40 grams (approx.)
Mounting Position: Any
Marking: Type Number
DO-15
Dim
Min
Max
A
25.40
—
B
5.50
7.62
C
0.686
0.889
D
2.60
3.60
All Dimensions in mm
Maximum Ratings and Electrical Characteristics
TA = 25C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%.
Characteristic
Symbol
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage
Average Rectified Output Current
(Note 1)
@TA = 55°C
FR201G FR202G FR203G FR204G FR205G FR206G FR207G
Unit
VRRM
VRWM
VR
50
100
200
400
600
800
1000
V
VR(RMS)
35
70
140
280
420
560
700
V
IO
2.0
A
Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave superimposed on
rated load (JEDEC Method)
IFSM
60
A
Forward Voltage
@IF = 2.0A
VFM
1.2
V
@TA = 25°C
@TA = 100°C
IRM
5.0
100
µA
Peak Reverse Current
At Rated DC Blocking Voltage
Reverse Recovery Time (Note 2)
trr
Typical Junction Capacitance (Note 3)
Cj
30
pF
Operating Temperature Range
Tj
-65 to +125
°C
TSTG
-65 to +150
°C
Storage Temperature Range
150
250
500
nS
Note: 1. Leads maintained at ambient temperature at a distance of 9.5mm from the case
2. Measured with IF = 0.5A, IR = 1.0A, IRR = 0.25A. See figure 5.
3. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C.
1 of 2
www.sunmate.tw
IF, INSTANTANEOUS FWD CURRENT (A)
10
1.0
0.1
Tj = 25°C
Pulse width = 300µs
0.01
0.6
0.8
1.0
1.2
1.4
60
100
Cj, CAPACITANCE (pF)
IFSM, PEAK FORWARD SURGE CURRENT (A)
VF, INSTANTANEOUS FORWARD VOLTAGE (V)
Fig. 2 Typical Forward Characteristics
40
20
TA = 25°C
f = 1.0MHz
10
1
0
1
10
1
100
10
VR, REVERSE VOLTAGE (V)
Fig. 4 Typical Junction Capacitance
NUMBER OF CYCLES AT 60Hz
Fig. 3 Peak Forward Surge Current
trr
+0.5A
50Ω NI (Non-inductive)
10Ω NI
Device
Under
Test
(-)
0A
(+)
Pulse
Generator
(Note 2)
50V DC
Approx
(-)
1.0Ω
NI
Oscilloscope
(Note 1)
-0.25A
(+)
Notes:
1. Rise Time = 7.0ns max. Input Impedance = 1.0MΩ, 22pF.
2. Rise Time = 10ns max. Input Impedance = 50Ω.
-1.0A
Set time base for 5/10ns/cm
Fig. 5 Reverse Recovery Time Characteristic and Test Circuit
2 of 2
www.sunmate.tw
100
Similar pages