LCD20 LCD20 SERIES DC-DC CONVERTER 2:1 WIDE INPUT RANGE UP TO 20Watts FEATURES APPLICATIONS • NO MINIMUM LOAD REQUIRED • 1600VDC INPUT TO OUTPUT ISOLATION • SMALL SIZE AND LOW PROFILE 1.0 x 1.0 x 0.39 INCH • SIX-SIDED CONTINUOUS SHIELD • MEET EN55022 CLASS A WITHOUT EXTERNAL COMPONENTS • UL60950-1, EN60950-1, & IEC60950-1 SAFETY APPROVALS • CE MARKED • COMPLIANT TO RoHS II & REACH • WIRELESS NETWORK • TELECOM/DATACOM • INDUSTRY CONTROL SYSTEM • DISTRIBUTED POWER ARCHITECTURES • SEMICONDUCTOR EQUIPMENT ： 1600VDC ISOLATION REMOTE CONTROL UVP OCP SCP LOW STANDBY POWER OVP TECHNICAL SPECIFICATION All specifications are typical at nominal input, full load and 25℃ otherwise noted Model Number Input Range Output Voltage Output Current @Full Load Input Current @ No Load Efficiency Maximum Capacitor Load (1) VDC 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 VDC 3.3 5 12 15 ±12 ±15 3.3 5 12 15 ±12 ±15 3.3 5 12 15 ±12 ±15 mA 4500 4000 1670 1330 ±833 ±667 4500 4000 1670 1330 ±833 ±667 4500 4000 1670 1330 ±833 ±667 mA 10 10 10 10 10 10 10 10 6 6 6 6 10 10 4 4 4 4 % 89 89 89 89 89 90 90 91 90 91 90 90 90 90 90 90 89 90 µF 7000 5000 850 700 ±500 ±350 7000 5000 850 700 ±500 ±350 7000 5000 850 700 ±500 ±350 LCD20-12S3P3 LCD20-12S05 LCD20-12S12 LCD20-12S15 LCD20-12D12 LCD20-12D15 LCD20-24S3P3 LCD20-24S05 LCD20-24S12 LCD20-24S15 LCD20-24D12 LCD20-24D15 LCD20-48S3P3 LCD20-48S05 LCD20-48S12 LCD20-48S15 LCD20-48D12 LCD20-48D15 PART NUMBER STRUCTURE LCD20 - 48 Series Name Input Voltage (VDC) 12: 9~18 24: 18~36 48: 36~75 S Output Quantity S: Single D: Dual 1 05 Output Voltage (VDC) 3P3: 3.3 05: 5 12: 12 15: 15 12: ±12 15: ±15 : A: B: C: D: E: A HS Option Assembly Option Negative logic remote ON/OFF(Standard) Positive logic remote ON/OFF Without Ctrl pin Negative logic remote ON/OFF without Trim pin Without Ctrl & Trim pin Positive logic remote ON/OFF without Trim pin www.PDUKE.com : No assembly HS: Heat-sink HC: Heat-sink with Clamp 2014/04/30 LCD20 INPUT SPECIFICATIONS Parameter Conditions 12Vin(nom) 24Vin(nom) 48Vin(nom) Operating input voltage range Input reflected ripple current Start-up voltage Start up time Constant resistive load Input surge voltage 1 second, max. Positive logic DC-DC ON (Option) DC-DC OFF Negative logic DC-DC ON (Standard) DC-DC OFF Input current of Ctrl pin Remote off input current Conditions Voltage accuracy Line regulation Low Line to High Line at Full Load Load regulation No Load to Full Load Over load protection Short circuit protection Asymmetrical load 25%/100% FL Single output Measured by 20MHz bandwidth With a 1µF M/C X7R and a 10µF T/C mAp-p 9 18 36 -0.5 VDC 30 30 25 50 100 Pi type Open or 3 ~ 15VDC Short or 0 ~ 1.2VDC Short or 0 ~ 1.2VDC Open or 3 ~ 15VDC 1.0 2.0 Typ. -1.0 -0.2 -0.5 -0.2 -1.0 -0.1 -0.8 -5.0 -10 3.3Vout, 5Vout 12Vout, 15Vout % of Iout rated; Hiccup mode Isolation resistance Isolation capacitance Switching frequency 500VDC ms VDC mA mA Max. Unit +1.0 +0.2 +0.5 +0.2 +1.0 +0.1 +0.8 +5.0 +10 % 75 100 % % % % mVp-p +0.02 250 3.3Vout 5Vout 12Vout 15Vout 1 minute VDC 8 16 33 -0.02 Isolation voltage 3.7 5.6 13.5 16.8 5.4 7.0 19.6 20.5 ℃ %/ µs VDC 150 % Continuous, automatics recovery Conditions Input to Output Input(Output) to Case 3.3Vout, 5Vout Others Safety approvals 2 VDC 25% load step change GENERAL SPECIFICATIONS Parameter Case material Base material Potting material Weight MTBF Unit 18 36 75 Min. Single Dual Single Dual Single Dual Dual 10% Load to 90%Load Temperature coefficient Transient response recovery time Over voltage protection Max. 12 24 48 30 12Vin(nom) 24Vin(nom) 48Vin(nom) 12Vin(nom) 24Vin(nom) 48Vin(nom) Power up Remote ON/OFF 12Vin(nom) 24Vin(nom) 48Vin(nom) Referred to –Vin pin OUTPUT SPECIFICATIONS Parameter Cross regulation Voltage adjustability (2) Ripple and noise Typ. 9 18 36 Nominal input and Full load Shutdown voltage Input filter Remote ON/OFF Min. Min. Typ. Max. 1600 1000 1 248 297 Unit VDC 275 330 1500 303 363 GΩ pF kHz UL60950-1 EN60950-1 IEC60950-1 Nickel-coated copper FR4 PCB Silicone (UL94 V-0) 15g (0.53oz) 1.477 x 106 hrs MIL-HDBK-217F, Full load www.PDUKE.com 2014/04/30 LCD20 ENVIRONMENTAL SPECIFICATIONS Parameter Conditions Operating ambient temperature Maximum case temperature Storage temperature range Thermal impedance Min. Without derating With derating Typ. Max. -40 +60 +60 +101 105 +125 -55 Vertical direction by natural convection (20LFM) Without heat-sink With heat-sink 17.6 14.8 Thermal shock Vibration Relative humidity Unit ℃ ℃ ℃ ℃/W MIL-STD-810F MIL-STD-810F 5% to 95% RH EMC SPECIFICATIONS Parameter EMI (3) ESD Radiated immunity Fast transient (4) Surge (4) Conducted immunity Conditions EN55022 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 Level Air ± 8kV and Contact ± 6kV 10 V/m ± 2kV ± 1kV 10 Vr.m.s Class A, Class B Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Note: 1. 2. 3. 4. Test by minimum input and constant resistive load. Trimming allows the user to increase or decrease the output voltage set point of the module. This is accomplished by connecting an external resistor between the Trim pin and either +Vout pin or -Vout pin. The standard modules meet EN55022 Class A without external components and meet Class B with external components. For further information, please contact with P-DUKE. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Power Mate suggest: Nippon chemi-con KY series, 220µF/100V. CAUTION: This power module is not internally fused. An input line fuse must always be used. CHARACTERISTIC CURVE 3 LCD20-48S05 Derating Curve LCD20-48S05 Derating Curve With Heat-sink LCD20-48S05 Efficiency vs. Input Voltage LCD20-48S05 Efficiency vs. Output Load www.PDUKE.com 2014/04/30 LCD20 MECHANICAL DRAWING PIN CONNECTION PIN 1 2 3 4 5 6 SINGLE +Vin -Vin Ctrl +Vout Trim -Vout DUAL +Vin -Vin Ctrl +Vout Common -Vout EXTERNAL OUTPUT TRIMMING Output can be externally trimmed by using the method shown below. TRIM UP TRIM DOWN 6 5 RU 5 RD 4 1. All dimensions in inch (mm) 2. Tolerance :x.xx±0.02 (x.x±0.5) x.xxx±0.01 (x.xx±0.25) 3. Pin pitch tolerance ±0.01 (0.25) 4. Pin dimension tolerance ±0.004(0.1) 4 www.PDUKE.com 2014/04/30