FUJITSU TAKAMISAWA COMPONENT CATALOG MINIATURE RELAY 2 POLES—1 to 2 A (FOR SIGNAL SWITCHING) FBR244 SERIES ■ FEATURES ● ● ● ● ● Gold-overlay bifurcated contact Contact material and shape especially suitable for signal switching; assures reliability at low level switching. Conforms to FCC68 standards High voltage relays are also available with dielectric strength greater than 1,000 VAC and surge strength greater than 1,500 V. Formed terminals for temporary mounting Kink terminals enable FBR240 Series relays to be mounted temporarily on a PC board. Automatic mounting Shipped in carrier case plastic magazine suitable for automatic mounting. UL and CSA recognized NO TF DE ■ ORDERING INFORMATION [Example] FBR244 N (a) (b) D (c) 012 / 02C (d) (e) OR NE GN W S SI S (f ) -2 -CSA (g) (h) (a) Series Name FBR244: FBR244 Series (b) Enclosure (c) Coil Type (d) Nominal Voltage (Example) Standard (Example) G type 003: 3 VDC 005: 4.5 VDC 012: 12 VDC 009: 9 VDC (refer to the COIL DATA CHART) (e) Contact Arrangement 02C : 2 form C (DPDT) (f) Contact Style and Contact Material T E S P : Bifurcated, gold-overlay silver contact : Bifurcated, gold-overlay silver-palladium contact : Single, gold-overlay silver contact : Single, gold-overlay silver-palladium contact (g) Special Type Nil -2 : Standard : High dielectric strength type (h) Safety Specification Nil : Standard -UL : UL114 recognized -CSA : UL114 + CSA recognized Nil N : Flux free type : Plastic sealed type D G : Standard (nominal power 0.5 W type) : G type (nominal power 0.55 W type) Note: The designation name is stamped on the top of the relay case as follows: (Example) Designation ordered: FBR244D012/02CE Stamp: 244D012/02CE 1 FBR244 SERIES ■ SAFETY STANDARD AND FILE NUMBERS UL114 (File No. E63615) C22.2 No. 14 (File No. LR40304 or LR64026) Nominal voltage Contact rating 2 A 28 VDC resistive 0.5 A 120 VAC resistive 3 to 48 VDC ■ SPECIFICATIONS Item Contact S contact Arrangement 2 form C (DPDT) Style Single Material Gold-overlay silver Resistance (initial) Maximum 100 mΩ (at 0.1 A 6 VDC) NO Ratings TF 2A Maximum Switching Power 60 AV or 30 W Voltage*1 Gold-overlay silver-palladium Gold-overlay silver Gold-overlay silver-palladium OR 220 VAC or 150 VDC Maximum Switching Current 1.25 A (AC) or 2 A (DC) Min. applicable Plastic sealed load*2 (Reference) Flux free 1 mA 5 VDC 1 mA 1 VDC 1 mA 1 VDC 0.1 mA 0.1 VDC 5 mA 5 VDC 1 mA 5 VDC 1 mA 5 VDC 1 mA 1 VDC Nominal Power (at 20°C) Approximately 0.5 W to 0.58 W (standard), approximately 0.55 W (G type) DE Operating Temperature Operating Humidity NE GN W S SI Approximately 0.28 W (standard), approximately 0.25 W (G type) –30°C to +70°C (no frost) (refer to the CHARACTERISTIC DATA) 45 to 85%RH Operate (at nominal voltage) Release (at nominal voltage) Insulation E contact 0.5 A 120 VAC or 1 A 30 VDC (resistive load) Operate Power (at 20°C) Time Value T contact Bifurcated Maximum Carrying Current Max. Switching Coil P contact Maximum 6 ms Maximum 3 ms Resistance (initial) Minimum 100 MΩ (at 500 VDC) Dielectric Strength Between coil and contacts 500 VAC 1 minute (standard) 1,000 VAC 1 minute (high dielectric strength type) Between open contacts 500 VAC 1 minute Surge Strength 1,500 V (at 10 × 700 µs) Mechanical 20 × Electrical (refer to the REFERENCE DATA) DC AC 1,500 V 750 V 10 µs Life Other 106 operations minimum 500 × 103 operations minimum (at contact rating) 100 × 103 operations minimum (at contact rating) Vibration Resistance 10 to 55 Hz (double amplitude of 1.5 mm) Shock Resistance Misoperation 200 m/s2 (11 ±1 ms) Endurance 1,000 m/s2 (11 ±1 ms) Weight 700 µs Approximately 4.5 g 1 * If the switching voltage exceeds the rated contact voltage, reduce the current. The current values vary according to the type of load. *2 Values when switching a resistive load at normal room temperature and humidity, and in a clean environment. The minimum switching load varies with the switching frequency and operation environment. 2 FBR244 SERIES ■ COIL DATA CHART 1. STANDARD (D type) MODEL Nominal Coil current resistance (at nominal ±10% voltage) approx. Nominal voltage ■ S, P, T, E Must operate voltage Must release voltage Nominal power Operate power Coil temperature rise Flux free Plastic sealed FBR244D003/02■ ■ FBR244ND003/02■ ■ 3 VDC 18 Ω 167 mA FBR244D005/02■ ■ FBR244ND005/02■ ■ 5 VDC 50 Ω 100 mA FBR244D006/02■ ■ FBR244ND006/02■ ■ 6 VDC 72 Ω FBR244D009/02■ ■ FBR244ND009/02■ ■ 9 VDC 162 Ω 75% max. 10% min. Approx. Approx. Approx. of of 500 mW 280 mW 45 deg 83 mA nominal nominal (at nominal max. (at nominal voltage voltage voltage) voltage) 56 mA FBR244D012/02■ ■ FBR244ND012/02■ ■ 12 VDC 290 Ω 41 mA FBR244ND024/02■ ■ 24 VDC 1,150 Ω 21 mA FBR244ND048/02■ ■ 48 VDC 4,000 Ω 12 mA NO FBR244D024/02■ ■ FBR244D048/02■ ■ 580 mW 53 deg Note: All values in the table are measured at 20°C. MODEL ■ S, P, T, E TF Nominal Coil current resistance (at nominal ±10% voltage) approx. Nominal voltage DE Flux free Plastic sealed FBR244G005/02■ ■ FBR244NG005/02■ ■ 4.5 VDC 36 Ω FBR244G006/02■ ■ FBR244NG006/02■ ■ 6 VDC 66 Ω FBR244G009/02■ ■ FBR244NG009/02■ ■ 9 VDC 140 Ω FBR244G012/02■ ■ FBR244NG012/02■ ■ 12 VDC 280 Ω FBR244G024/02■ ■ FBR244NG024/02■ ■ 24 VDC 1,050 Ω FBR244G048/02■ ■ FBR244NG048/02■ ■ 48 VDC 4,100 Ω ■ CHARACTERISTIC DATA Range of operation temperature and voltage [Standard 0.5 W type] Nominal voltage multiplying factor (%) 1.8 (Data) assumes that the maximum allowable temperature of E type insulation coil is 115˚C Max imu m coil allowa volt ble age 0A 1.6 1A 1.4 1.2 1.0 0.8 0.6 Operating voltage range ge ate volta Must oper Nominal power Operate power 91 mA 4.0 VDC 0.27 VDC Approx. Approx. Approx. 50 deg 550 mW 250 mW (at nominal 43 mA 8.1 VDC 0.55 VDC (at nominal max. voltage) voltage) 23 mA 15.8 VDC 1.06 VDC 64 mA 6.0 VDC 0.38 VDC 11 mA 30.5 VDC 2.12 VDC 2.0 1.8 1.6 1.4 (Data) assumes that the maximum allowable temperatu of E type insulation coil is 115˚C 0A 1A Ma xim um allo wab 1.2 1.0 le c Operating voltage range oil v olta ge 0.8 0.6 Operate time 20 10 5 including bounce time 3 2 1 not including bounce time ate voltage Must oper 0.5 0 10 20 30 40 50 60 70 Operating temperature (˚C) Coil temperature rise 3.1 VDC 0.20 VDC Range of operation temperature and voltage [G type 0.55 W type] Nominal voltage multiplying factor (%) 2.0 Must release voltage NE GN W S SI Note: All values in the table are measured at 20°C. OR 125 mA Must operate voltage Time (ms) 2. G TYPE 0 10 20 30 40 50 60 70 Operating temperature (˚C) 0.2 0.4 0.6 0.8 1.0 1.2 Coil power (W) 3 FBR244 SERIES Release time 5 3 2 not including bounce time 1 0.5 ➀AC resistive load ( AC contact rating) ➁DC resistive load ( DC contact rating) ➁ 2.0 ➀ 1.0 ➀ ➁ 0.5 0.3 0.2 (x104 ) 500 Service life (operations) including bounce time Contact load current (A) Time (ms) 10 Life curve Maximum switching capacity 20 28 V DC resistive load 100 50 120 V AC resistive load 10 5 1 0.1 0.2 0.4 0.6 0.8 1.0 1.2 Coil power (W) 0.5 NO 1.0 1.5 2.0 Contact load current (A) 10 20 30 50 100 150 220 Contact load voltage (V) ■ REFERENCE DATA Distribution of operate and release time Distribution of operate and release voltage 30 80 DE 20 10 0 0 10 20 30 40 50 60 70 80 Rated coil voltage multiplying factor (%) ■ DIMENSIONS ●Dimensions 9.6+0.2 3.5 80 OR 60 40 60 40 NE SI GN W S 20 0 0 1 2 3 4 5 Time (ms) 6 7 8 ●Schematic (BOTTOM VIEW) 20 0 0 10 20 30 40 50 60 70 80 Contact resistance (mΩ) ●PC board mounting hole layout (BOTTOM VIEW) 8–ø0.8 10.0+0.3 20.0+0.2 Operate Release 1 4 16 13 11 9 6 8 7.62 Distribution (%) 40 TF 100 Distribution (%) Operate Release 50 Distribution of contact resistance 100 Distribution (%) 60 * (1.0) 7.62 5.08 5.08 (0.99) 7.62 7.62 5.08 5.08 *:The terminals marked with an asterisk are kinked for temporary mounting on PC board. ●Tube carrier 520 maximum 19.8 maximum 12.8 max. 25 pieces/tube Unit: mm 4 FBR244 SERIES Fujitsu Takamisawa International Headquarter Offices www.fujitsu.takamisawa.com Japan Fujitsu Takamisawa Component Limited Global Marketing and Sales Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 North and South America Fujitsu Takamisawa America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Europe Fujitsu Takamisawa Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Asia Pacific Fujitsu Takamisawa Asia Pacific Pte. Ltd. 102E Pasir Panjang Road #04-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 375-8560 Fax: (65) 273-3021 NO TF DE OR NE GN W S SI 5