Total Power: Input Voltage: 60 Watts LPS50-M Series 55-60 Watts 90-264 VAC 127-300 VDC Single # of Outputs: Electrical Specs Input Input range 90-264 VAC (wide range) 127-300 VDC 47-440 Hz <60 A peak @ 230 VAC, cold start @ 25°C <74 Watts 80-85% typical at full load FCC Class B conducted CISPR 22 Class B conducted EN55022 class B conducted VDE 0878 PT3 class B conducted Frequency Inrush current Input power Efficiency EMI RFI Safety ground leakage current Special Features • • • • • • • • • • • • • • 275 uA @ 50/60 Hz, 264 VAC input Output Medical Safety Approvals Universal input 2” x 4” footprint Remote sense Overload and short circuit protection Adjustable Output Voltage High efficiency High MTBF Built in EMI filter (CISPR 22 Class B) LED power good indicator Input power <74 watts Complies with EN61000-3-2 UL Class I approved UL Class II available, consult factory Maximum power 60 W for convection (LPS52, 55W) Adjustment range Hold-up time Overload protection ±20% minimum 10/20 ms 115/230 VAC Input line Short circuit protection on all outputs. Case overload protected @ 110-160% of normal rating 30-50% above nominal output Compensates for 0.5 V lead drop max. Will operate without remote sense connected. Reverse connection protected. Overvoltage protection Remote sense Environmental Operating temperature: 0° to 50°C ambient derate each output as 2.5% per degree from 50° to 70°C. -20°C start up. Storage temperature: -40°C to +85°C Electromagnetic susceptibility: designed to meetEN61000-4; -2, -3, -4, -5, -6, -8, -11 Level 3 Safety UL CSA VDE CE UL 60601-1 CSA-C22.2 No. 601.1-M90 EN60601-1 LVD & EMC Humidity: Operating; non-condensing 10% to 95%RH Vibration: IEC68-2-6 to the levels of IEC721-3-2 MTBF demonstrated: >550,000 hours at full load and 25°C ambient conditions. 74 Americas: 1-888-41-ASTEC Europe (UK): 44 (1384) 842-211 Asia (HK): 852-2437-9662 rev 08.16.05 AMERICAS EUROPE ASIA 5810 Van Allen Way Carlsbad, CA 92008 Telephone: 760-930-4600 Facsimile: 760-930-0698 Astec House, Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX, UK Telephone: 44 (1384) 842-211 Facsimile: 44(1384) 843-355 Units 2111-2116, Level 21 Tower1, Metroplaza 223, Hing Fong Road Kwai Fong, New Territories Hong Kong Telephone: 852-2437-9662 Facsimile: 852-2402-4426 LPS50-M Series Ordering Information Model Number Output Voltage Minimum Load Maximum Load with Convection Cooling Peak Load1 Regulation2 Ripple P/P (PARD)3 LPS52-M LPS53-M LPS54-M LPS55-M LPS58-M 5V 12V 15V 24V 48V 0A 0A 0A 0A 0A 11 A 5A 4A 2.5 A 1.25 A 12 A 5.4 A 4.4 A 2.75 A 1.35 A ±2% ±2% ±2% ±2% ±2% 50 mV 120 mV 150 mV 240 mV 480 mV 1. Peak current lasting <15 seconds with a maximum 10% duty cycle. 2. At 25°C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. 3. Peak-to-peak with 20 MHz bandwidth and 10 µF (tantalum capacitor) in parallel with a 0.1 µF capacitor at rated line voltage and load ranges. Pin Assignments SK2-1 SK2-2 SK2-3 SK2-4 SK2-5 SK2-6 +12 V +12 V Common Common -Sense +Sense +15V +15V Common Common -Sense +Sense +24V +24V Common Common -Sense +Sense +48 +48 Common Common -Sense +Sense +5 V +5 V Common Common -Sense +Sense VR1 (Output Voltage Adjustment Pot) M2 M1 C4 GRN/ YEL + ~ ~ R3 A DB1 Q5 R3 VR1 24 C F1 L1 C22 1 3 B T2 SK1 T3.15A 2.5A 250VAC F2 C1 C18 C9 Astec Connector Kit #70-841-006, includes all of the above Notes: 1. Specifications subject to change without notice. 2. All dimensions in inches (mm), tolerance is ±.02" (±0.5mm) 3. Mounting holes M1 and M2 should be grounded for EMI purposes. 4. Mounting hole M1 is safety ground connection. 5. Specifications are for convection rating at factory settings at 115 VAC input, 25°C unless otherwise stated. 6. Warranty: 1 year 7. Weight: .41lbs/.18kg www.astecpower.com DIP Molex 09-50-8061 (USA) 09-91-0600 (UK) PINS: 08-58-0111 A C5 1 1 C30 Q6 R TH 1 DC Outputs: C27 R1 D 4 SK2 T3.15A 2.5A 250VAC 2.00" [50.8] T1 L3 C2 Mating Connectors AC Input: Molex 09-50-8031 (USA) 09-91-0300 (UK) PINS: 08-58-0111 CN1 GND TP2 J4 L2 C32 TP1 J3 22 2005 I C17 3.75" [95.3] E F J1 J2 G H D2 1.75" [44.5] LPS58-M Line Neutral 6 HTSK_SEC D J LED1 Mounting Hole Ø0.16"[4.0] 4 Places 4.00" [101.6] 0.16" [4.0] 1.30" [33.0] LPS55-M Line Neutral R26 LPS54-M Line Neutral 3 LPS53-M Line Neutral C Connector LPS52-M SK1-1 Line SK1-3 Neutral 75