PhaseCap™ HD B25669-A4827-J375 MKK440-D-50-21 4RB5 500-5 AB 45 Characteristics CN UN fN QN IN ∆ tan δ 0 3x 274 AC 440 50 50 3x 66 µF ±5 % V Hz kvar A Marking 60 Hz *) 60 kvar *) 79 A *) 0,2 W/kvar (dielectric) *) Temperature class deviation -40/B max. 45°C Maximum ratings The information in our data book / sheet describes the type of component and shall not be considered as assured characteristics. Umax I r(40) Is (du/dt) max (du/dt) s AC 480 AC 570 3x 90 18 15 38 V, 8 h daily V, 1 min A (ΘA = 40°C, U N ) kA V/µs V/µs Toothed washer DIN 6797-J13 Hex nut DIN 439-BM12 Test data UTT UTC AC 950 V, 10 s AC 3000 V, 10 s tanδ (50 Hz) ≤ 0,4 W/kvar (total) Rivet (Impregnating hole) C61014-A0518-A001 Dimensions in mm Climatic category -40/D Design data Θ min Θ max Humidity Dimensions Ø x l Approx. weight Impregnation 142 x 355 mm (5,59 x 13,98 in) 4,7 kg (10,4 lb) Gas Fixing Mounting hole Max. torque Threaded bolt M12 14 mm (0,55 in) 10 Nm Terminals Max. torque Terminal cross section Isolated terminal, IP20 2,5 Nm 35 mm² (2 AWG) Creepage distance Clearance 15 mm (0,59 in) 12 mm (0,47 in) Θ stg –40 °C +55 °C Max. relative Humidity ≤ 95 % –55 bis +70 °C Life expectancy t LD 100 000 h Overpressure disconnector Upright mounting position Remarks Natural cooling IEC 60831-1/2, EN 60831-1/2, VDE 560-46/47 KO L E / Pe 17.12.1999 Contact: EPCOS AG KO PM L, P.O. Box 80 17 09, 81617 Munich, Germany, Fax: 0049 89 636-22748, Phone: 0049 89 636-23817