D2W Series • SIP SSR • Ratings to 3.5A @ 280 VAC • DC control • Zero-crossing (resistive loads) output • Internal snubber network PRODUCT SELECTION Control Voltage 3-32 VDC 2A 3A 3.5A D2W202F D2W203F D2W203F-11 24-280 600 8 200 2 0.06 28 1.4 0.5 24-280 600 8 200 3 0.06 70 1.4 0.5 24-280 600 8 200 3.5 0.06 80 1.4 0.5 OUTPUT SPECIFICATIONS (1) Description Operating Voltage (47-63Hz) [Vrms] Transient Overvoltage [Vpk] Maximum Off-State Leakage Current @ Rated Voltage [mArms] Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (3) Maximum Load Current [Arms] Minimum Load Current [Arms] Maximum Surge Current (16.6ms) [Apk] Maximum On-State Voltage Drop @ Rated Current [Vpk] Minimum Power Factor (with Maximum Load) INPUT SPECIFICATIONS (1) Description Control Voltage Range Must Turn On Voltage Must Turn Off Voltage Typical Input Current @ 5 VDC Nominal Input Impedance Maximum Turn-On Time [msec] Maximum Turn-Off Time [msec] 3-32 VDC 3.0 VDC 1.0 VDC 3.0 mAdc 1500 Ohm 1/2 Cycle 1/2 Cycle GENERAL SPECIFICATIONS Description Dielectric Strength, Input/Output/Base (50/60Hz)(2) Minimum Insulation Resistance (@ 500 VDC)(2) Maximum Capacitance, Input/Output Ambient Operating Temperature Range Ambient Storage Temperature Range Weight (typical) Encapsulation GENERAL NOTES 1) All parameters at 25°C unless otherwise specified. 2) Dielectric and insulation resistance are measured between input and output 3) Off-State dv/dt test method per EIA/NARM standard RS Parameters 4000 Vrms 10 9 Ohm 10 pF -30 to 80°C -30 to 125°C 0.6 oz. (17g) Thermally Conductive Epoxy MECHANICAL SPECIFICATIONS PIN 1: AC LOAD PIN 2: AC LOAD PIN 3: +DC CONTROL PIN 4: -DC CONTROL THERMAL DERATE INFORMATION AGENCY APPROVALS UL E116950 CSA LR81689 Rev. 120110 ANNEX - ENVIROMENTAL INFORMATION