IDT74LVC162245A 3.3V CMOS 16-BIT TRANSCEIVER WITH 3-STATE OUTPUTS INDUSTRIAL TEMPERATURE RANGE 3.3V CMOS 16-BIT BUS TRANSCEIVER WITH 3-STATE OUTPUTS AND 5 VOLT TOLERANT I/O IDT74LVC162245A DESCRIPTION: FEATURES: This 16-bit transceiver is built using advanced dual metal CMOS technology. The LVC162245A is designed for asynchronous communication between data buses. The control-function implementation minimizes external timing requirements. This device can be used as two 8-bit transceivers or one 16-bit transceiver. It allows data transmission from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE) input can be used to disable the device so that the buses are effectively isolated. To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. All pins can be driven from either 3.3V or 5V devices. This feature allows the use of this device as a translator in a mixed 3.3V/5V supply system. The LVC162245A has series resistors in the device output structure of the “A” port which will significantly reduce line noise when used with light loads. The driver has been designed to drive ±12mA at the designated threshold levels. The “B” port has a ±24mA driver. • Typical tSK(o) (Output Skew) < 250ps • ESD > 2000V per MIL-STD-883, Method 3015; > 200V using machine model (C = 200pF, R = 0) • VCC = 3.3V ± 0.3V, Normal Range • VCC = 2.7V to 3.6V, Extended Range μ W typ. static) • CMOS power levels (0.4μ • All inputs, outputs, and I/O are 5V tolerant • Available in SSOP and TSSOP packages DRIVE FEATURES: • Balanced Output Drivers: ±12mA (A port) • High Output Drivers: ±24mA (B port) APPLICATIONS: • 5V and 3.3V mixed voltage systems • Data communication and telecommunication systems FUNCTIONAL BLOCK DIAGRAM 1DIR 24 1 2DIR 25 48 1OE 1A1 2OE 47 2A1 2 36 13 1B1 1A2 2A2 3 14 1B2 1A3 2A3 16 1B3 2B3 32 43 2A4 6 17 1B4 1A5 2B4 41 2A5 30 8 19 1B5 1A6 40 2A6 20 1B6 38 2A7 22 1B7 2B7 37 2A8 12 2B6 27 11 1A8 2B5 29 9 1A7 2B2 33 44 5 1A4 2B1 35 46 26 23 1B8 2B8 IDT and the IDT logo are registered trademarks of Integrated Device Technology, Inc. INDUSTRIAL TEMPERATURE RANGE AUGUST 2015 1 © 2015 Integrated Device Technology, Inc. DSC-4483/5 IDT74LVC162245A 3.3V CMOS 16-BIT TRANSCEIVER WITH 3-STATE OUTPUTS INDUSTRIAL TEMPERATURE RANGE ABSOLUTE MAXIMUM RATINGS(1) PIN CONFIGURATION Symbol Description Max Unit VTERM(2) Terminal Voltage with Respect to GND –0.5 to +6.5 V VTERM(3) Terminal Voltage with Respect to GND –0.5 to +6.5 V 1DIR 1 48 1OE TSTG Storage Temperature –65 to +150 °C 1B1 2 47 1A1 IOUT DC Output Current –50 to +50 mA 1B2 3 46 1A2 IIK IOK Continuous Clamp Current, VI < 0 or VO < 0 –50 mA GND 4 45 GND mA 5 44 1A3 Continuous Current through each VCC or GND ±100 1B3 ICC ISS 1B4 6 43 1A4 VCC 7 42 VCC 1B5 8 41 1A5 1B6 9 40 1A6 GND 10 39 GND 1B7 11 38 1A7 1B8 12 37 1A8 2B1 13 36 2A1 2B2 14 35 2A2 GND 15 34 GND 2B3 16 33 2A3 2B4 17 32 2A4 VCC 18 31 VCC 2B5 19 30 2A5 2B6 20 29 2A6 GND 21 28 GND 2B7 22 27 2A7 2B8 23 26 2A8 2DIR 24 25 2OE NOTES: 1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. 2. VCC terminals. 3. All terminals except VCC. CAPACITANCE (TA = +25°C, F = 1.0MHz) Parameter(1) Symbol Conditions Typ. Max. Unit CIN Input Capacitance VIN = 0V 4.5 6 pF COUT Output Capacitance VOUT = 0V 6.5 8 pF CI/O I/O Port Capacitance VIN = 0V 6.5 8 pF NOTE: 1. As applicable to the device type. PIN DESCRIPTION Pin Names Description xOE Output Enable Input (Active LOW) xDIR Direction Control Output xAx Side A Inputs or 3-State Outputs xBx Side B Inputs or 3-State Outputs FUNCTION TABLE (EACH 8-BIT SECTION)(1) Inputs SSOP / TSSOP TOP VIEW xOE xDIR L L B Data to A Bus L H A Data to B Bus H X Isolation NOTE: 1. H = HIGH Voltage Level X = Don’t Care L = LOW Voltage Level 2 Outputs IDT74LVC162245A 3.3V CMOS 16-BIT TRANSCEIVER WITH 3-STATE OUTPUTS INDUSTRIAL TEMPERATURE RANGE DC ELECTRICAL CHARACTERISTICS OVER OPERATING RANGE Following Conditions Apply Unless Otherwise Specified: Operating Condition: TA = –40°C to +85°C Symbol VIH VIL Min. Typ.(1) Max. Unit VCC = 2.3V to 2.7V 1.7 — — V VCC = 2.7V to 3.6V 2 — — VCC = 2.3V to 2.7V — — 0.7 VCC = 2.7V to 3.6V — — 0.8 Parameter Input HIGH Voltage Level Input LOW Voltage Level Test Conditions V Input Leakage Current VCC = 3.6V VI = 0 to 5.5V — — ±5 μA IOZH High Impedance Output Current VCC = 3.6V VO = 0 to 5.5V — — ±10 μA IOZL (3-State Output pins) IOFF Input/Output Power Off Leakage VCC = 0V, VIN or VO ≤ 5.5V — — ±50 μA VIK Clamp Diode Voltage VCC = 2.3V, IIN = –18mA — –0.7 –1.2 V VH ICCL ICCH ICCZ ΔICC Input Hysteresis Quiescent Power Supply Current VCC = 3.3V VCC = 3.6V VIN = GND or VCC — — 100 — — 10 mV μA 3.6 ≤ VIN ≤ 5.5V(2) One input at VCC - 0.6V, other inputs at VCC or GND — — — — 10 500 μA IIH IIL Quiescent Power Supply Current Variation NOTES: 1. Typical values are at VCC = 3.3V, +25°C ambient. 2. This applies in the disabled state only. OUTPUT DRIVE CHARACTERISTICS (A PORT) Symbol VOH Test Conditions(1) Parameter Output HIGH Voltage Unit V IOH = – 0.1mA VCC – 0.2 — VCC = 2.3V IOH = – 4mA 1.9 — IOH = – 6mA 1.7 — IOH = – 4mA 2.2 — IOH = – 8mA 2 — VCC = 3V Output LOW Voltage Max. VCC = 2.3V to 3.6V VCC = 2.7V VOL Min. IOH = – 6mA 2.4 — IOH = – 12mA 2 — VCC = 2.3V to 3.6V IOL = 0.1mA — 0.2 VCC = 2.3V IOL = 4mA — 0.4 IOL = 6mA — 0.55 IOL = 4mA — 0.4 IOL = 8mA — 0.6 IOL = 6mA — 0.55 IOL = 12mA — 0.8 VCC = 2.7V VCC = 3V V NOTE: 1. VIH and VIL must be within the min. or max. range shown in the DC ELECTRICAL CHARACTERISTICS OVER OPERATING RANGE table for the appropriate VCC range. TA = – 40°C to + 85°C. 3 IDT74LVC162245A 3.3V CMOS 16-BIT TRANSCEIVER WITH 3-STATE OUTPUTS INDUSTRIAL TEMPERATURE RANGE OUTPUT DRIVE CHARACTERISTICS (B PORT) Symbol VOH Test Conditions(1) Parameter Output HIGH Voltage VCC = 2.3V to 3.6V IOH = – 0.1mA VCC = 2.3V IOH = – 6mA VCC = 2.3V IOH = – 12mA VCC = 2.7V VCC = 3V VOL Output LOW Voltage Min. Max. Unit VCC – 0.2 — V 2 — 1.7 — 2.2 — 2.4 — VCC = 3V IOH = – 24mA 2 — VCC = 2.3V to 3.6V IOL = 0.1mA — 0.2 VCC = 2.3V IOL = 6mA — 0.4 IOL = 12mA — 0.7 VCC = 2.7V IOL = 12mA — 0.4 VCC = 3V IOL = 24mA — 0.55 V NOTE: 1. VIH and VIL must be within the min. or max. range shown in the DC ELECTRICAL CHARACTERISTICS OVER OPERATING RANGE table for the appropriate VCC range. TA = – 40°C to + 85°C. OPERATING CHARACTERISTICS, VCC = 3.3V ± 0.3V, TA = 25°C Symbol Parameter CPD Power Dissipation Capacitance per Transceiver Outputs enabled CPD Power Dissipation Capacitance per Transceiver Outputs disabled Test Conditions Typical CL = 0pF, f = 10Mhz Unit pF SWITCHING CHARACTERISTICS (A PORT)(1) Symbol tPLH tPHL tPZH tPZL tPHZ tPLZ tSK(o) Parameter Propagation Delay xBx to xAx Output Enable Time xOE to xAx Output Disable Time xOE to xAx Output Skew(2) Min. 1.5 VCC = 2.7V Max. 5.7 VCC = 3.3V ± 0.3V Min. Max. 1.5 4.8 Unit ns 1.5 7.9 1.5 6.3 ns 1.5 8.3 2.2 7.4 ns — — — 500 ps NOTES: 1. See TEST CIRCUITS AND WAVEFORMS. TA = – 40°C to + 85°C. 2. Skew between any two outputs of the same package and switching in the same direction. SWITCHING CHARACTERISTICS (B PORT)(1) Symbol tPLH tPHL tPZH tPZL tPHZ tPLZ tSK(o) Parameter Propagation Delay xAx to xBx Output Enable Time xOE to xBx Output Disable Time xOE to xBx Output Skew(2) Min. 1.5 NOTES: 1. See TEST CIRCUITS AND WAVEFORMS. TA = – 40°C to + 85°C. 2. Skew between any two outputs of the same package and switching in the same direction. 4 VCC = 2.7V Max. 4.7 VCC = 3.3V ± 0.3V Min. Max. 1 4 Unit ns 1.5 6.7 1.5 5.5 ns 1.5 7.1 1.5 6.6 ns — — — 500 ps IDT74LVC162245A 3.3V CMOS 16-BIT TRANSCEIVER WITH 3-STATE OUTPUTS INDUSTRIAL TEMPERATURE RANGE TEST CIRCUITS AND WAVEFORMS TEST CONDITIONS Symbol VCC(1)= 3.3V±0.3V VCC(1)= 2.7V VCC(2)= 2.5V±0.2V Unit VLOAD 6 6 2 x Vcc V VIH 2.7 2.7 Vcc V VT 1.5 1.5 Vcc / 2 V VLZ 300 300 150 mV VHZ 300 300 150 mV CL 50 50 30 pF Pulse (1, 2) Generator VIN DISABLE tPZL OUTPUT SWITCH NORMALLY CLOSED LOW tPZH OUTPUT SWITCH NORMALLY OPEN HIGH 500 CL DEFINITIONS: CL = Load capacitance: includes jig and probe capacitance. RT = Termination resistance: should be equal to ZOUT of the Pulse Generator. Switch VLOAD TIMING INPUT Disable High Enable High GND ASYNCHRONOUS CONTROL All Other Tests Open SYNCHRONOUS CONTROL tSK (x) tPLH2 VOH VT VOL tH tREM tSU tH LOW-HIGH-LOW PULSE VT tW HIGH-LOW-HIGH PULSE VT LVC Link tPHL2 Pulse Width tSK(x) = tPLH2 - tPLH1 or tPHL2 - tPHL1 Output Skew - tSK(X) tSU VIH VT 0V VIH VT 0V VIH VT 0V VIH VT 0V Set-up, Hold, and Release Times VOH VT VOL OUTPUT 2 VOH VOH-VHZ 0V VT 0V LVC Link VIH VT 0V tSK (x) tPHZ Enable and Disable Times DATA INPUT tPHL1 VLOAD/2 VOL+VLZ VOL NOTE: 1. Diagram shown for input Control Enable-LOW and input Control Disable-HIGH. SWITCH POSITION Open Drain Disable Low Enable Low tPLZ VLOAD/2 VT LVC Link NOTES: 1. Pulse Generator for All Pulses: Rate ≤ 10MHz; tF ≤ 2.5ns; tR ≤ 2.5ns. 2. Pulse Generator for All Pulses: Rate ≤ 10MHz; tF ≤ 2ns; tR ≤ 2ns. Test VIH VT 0V CONTROL INPUT Test Circuit for All Outputs OUTPUT 1 VIH VT 0V ENABLE GND VOUT tPLH1 tPHL Propagation Delay LVC Link INPUT tPLH LVC Link D.U.T. RT tPHL OPPOSITE PHASE INPUT TRANSITION Open 500 tPLH OUTPUT VLOAD VCC VIH VT 0V VOH VT VOL SAME PHASE INPUT TRANSITION LVC Link NOTES: 1. For tSK(o) OUTPUT1 and OUTPUT2 are any two outputs. 2. For tSK(b) OUTPUT1 and OUTPUT2 are in the same bank. 5 IDT74LVC162245A 3.3V CMOS 16-BIT TRANSCEIVER WITH 3-STATE OUTPUTS INDUSTRIAL TEMPERATURE RANGE ORDERING INFORMATION X LVC XX Bus-Hold Temp. Range XX Family XX XXXX Device Type Package X Blank 8 Tube or Tray Tape and Reel PVG PAG Shrink Small Outline Package - Green Thin Shrink Small Outline Package - Green 245A 16-Bit Bus Transceiver 162 Double-Density 3.3Volt with Resistors, ±12mA (A Port) ±24mA (B Port) Blank No Bus-hold 74 -40°C to +85°C DATASHEET DOCUMENT HISTORY 08/20/2015 Pg. 6 Updated the ordering information by removing TSSOP, non RoHS parts and adding Tape and Reel information. CORPORATE HEADQUARTERS 6024 Silver Creek Valley Road San Jose, CA 95138 for SALES: 800-345-7015 or 408-284-8200 fax: 408-284-2775 www.idt.com 6 for Tech Support: [email protected]