Product Data Sheet 1 WATT UNREGULATED DC/DC CONVERTER HL01U FEATURES ● ● ● ● ● HIGH EFFICIENCY ● NON-CONDUCTIVE CASE ● SURFACE MOUNT PACKAGE (SMD) LOW COST INTERNAL FILTERING SURFACE MOUNT CONSTRUCTION TEMPERATURE RANGE: -25°C TO +70°C DESCRIPTION The HL01U Series offers an extensive selection of input and output voltages to choose from. These miniature, unregulated DC/DC converters come in 24-pin DIP and SMD packages. This small size is possible through the use of surface mount manufacturing technologies. The HL01U Series utilizes a 125KHz push-pull oscillator in the input stage with internal filtering to reduce the output noise. ABSOLUTE MAXIMUM RATINGS ORDERING INFORMATION Internal Power Dissipation..................................................................30 Sec Short Circuit Duration..................................................................Momentary Lead Temperature (soldering, 10 seconds max)..............................+300°C * * Note: Refer to Reflow Profile for SMD Models. The use of surface mount construction and automated manufacturing processes increase consistency and reliability while reducing overall cost. HL01U xxyzz Y/Z /H Device Family HL Indicates DC/DC Converter Model Number Where: xx = Input Voltage y = Number or Outputs (Single "S", Dual "D") zz = Output Voltage Package Option Screening Option DIP Package only Internet: http://www.cdpowerelectronics.com Power Electronics Division, United States 3400 E Britannia Drive, Tucson, Arizona 85706 Phone: 800.547.2537 Fax: 520.770.9369 HL01UrevD,10/97 Power Electronics Division, Europe C&D Technologies (Power Electronics) Ltd. 132 Shannon Industrial Estate, Shannon, Co. Clare, Ireland Tel: +353.61.474.133 Fax:+353.61.474.141 Page 1 ELECTRICAL SPECIFICATIONS Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified. NOMINAL INPUT VOLTAGE MODEL RATED OUTPUT VOLTAGE RATED OUTPUT CURRENT INPUT CURRENT NO LOAD RATED LOAD (mA) EFFICIENCY (VDC) (VDC) (mA) (mA) (%) HL01U05S05 HL01U05S12 HL01U05S15 5 5 5 5 12 15 200 83 67 30 30 30 300 260 260 70 74 74 HL01U12S05 HL01U12S12 HL01U12S15 12 12 12 5 12 15 200 83 67 25 25 25 120 120 120 67 70 70 HL01U15S05 HL01U15S12 HL01U15S15 15 15 15 5 12 15 200 83 67 20 20 20 100 100 100 67 70 70 HL01U24S05 HL01U24S12 HL01U24S15 24 24 24 5 12 15 200 83 67 15 15 15 65 65 65 67 70 70 HL01U05D05 HL01U05D12 HL01U05D15 5 5 5 ±5 ±12 ±15 ±100 ±41 ±33 30 30 30 300 260 260 70 74 74 HL01U12D05 HL01U12D12 HL01U12D15 12 12 12 ±5 ±12 ±15 ±100 ±41 ±33 25 25 25 120 120 120 67 70 70 HL01U15D05 HL01U15D12 HL01U15D15 15 15 15 ±5 ±12 ±15 ±100 ±41 ±33 20 20 20 100 100 100 67 70 70 HL01U24D05 HL01U24D12 HL01U24D15 24 24 24 ±5 ±12 ±15 ±100 ±41 ±33 15 15 15 65 65 65 67 70 70 TYP MAX UNITS 5 12 15 24 30 5.5 13.2 16.5 26.4 100 VDC COMMON SPECIFICATIONS Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified. PARAMETER CONDITIONS INPUT Voltage Range MIN 4.5 10.8 13.5 22.6 Reflected Ripple Current ISOLATION Rated Voltage Test Voltage Resistance Capacitance Leakage Current OUTPUT Rated Power Voltage Setpoint Accuracy Temperature Coefficent Ripple & Noise Line Regulation Load Regulation 5 Vout Models All Others GENERAL Switching Frequency Package Weight MTTF per MIL-HDBK-217, Rev. F Ground Benign TEMPERATURE Specification Operation Storage Page 2 60 Hz, 10 Seconds 500 500 VDC mAp-p VDC Vpk GΩ pF µArms VISO= 240VAC, 60Hz 1 25 2 BW = DC to 10MHz BW =10Hz to 2MHz High Line to Low Line 1 ±3 ±0.02 50 10 1 ±1.5 W % %/°C mVp-p mVrms %/% 25% Rated Load to Rated Load 10% Rated Load to Rated Load ±5 ±3 ±10 ±10 % % Circuit Stress Method TA = +25°C TA = +70°C -25 -40 -40 ±5 100 125 12 kHz g 1100 550 kHr kHr +70 +85 +110 °C °C °C HL01UrevD,10/97 MECHANICAL Package/Pinout "Y" and "Z" 1.285±0.010" (32.64±0.25) 1.285±0.010" (32.64±0.25) 2423 22 0.525±0.010" (13.34±0.25) 2423 22 1514 13 0.525±0.010" (13.34±0.25) HL01UxxyzzY 1 2 3 SIDE VIEWS 0.695±0.015" (17.65±0.38) 10 11 12 0.375±0.005" (9.52±0.13) 0.015±0.005" (0.38±0.13) 0.020±0.002" (0.51±0.05) 0.100±0.010" (2.54±0.25) HL01UxxyzzZ 1 2 3 10 11 12 0.375±0.005" (9.52±0.13) 0.015±0.005" (0.38±0.13) 1514 13 TOP VIEWS 0.100±0.010" (2.54±0.25) 0.020±0.002" (0.51±0.05) END VIEWS 0°-15° 0.600" (15.24) 0.125+0.030" -0.000" (3.18+0.76) ( -0.00) 0.014±0.002" (0.36±0.05) DIP PACKAGE .015±.010" (.38±.25) SMD PACKAGE NU = Do Not Use. NC = No Internal Connection. PIN CONNECTIONS Duplicate pin functions are internally connected. PIN# All dimensions are in inches (millimeters). GRID: 0.100 inches (2.54 millimeters) Typically Marked with: specific model ordered, date code, job code and Logo. RECOMMENDED LAND PATTERN SINGLES DUALS 1 2 3 +VIN NU NU +VIN -VOUT Common 10 11 12 -VOUT +VOUT -VIN Common +VOUT -VIN 13 14 15 -VIN +VOUT -VOUT -VIN +VOUT Common 22 23 24 NU NU +VIN Common -VOUT +VIN RECOMMENDED REFLOW PROFILE 30 sec MAX (>220°C) 0.100" (2.54) 250 235 °C MAX 2423 22 220 1514 13 200 0.040" (1.02) 1 2 3 10 11 12 1.150" (29.21) 190 TEMPERATURE (°C) 0.080" (2.03) 0.730" (18.54) 150 100 90 sec MAX (>190°C) 50 TIME (seconds) HL01UrevD,10/97 Page 3 TYPICAL PERFORMANCE CURVES Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified. VOUT VS LOAD (±5Vout Models) 5.9 6.0 13.6 5.6 5.3 5.7 5.4 5.0 5.1 4.7 4.8 50 100 150 Vout (Volts) 14.0 0 200 13.2 12.8 12.4 12.0 0 25 Load (mA) 50 75 100 0 VOUT VS LOAD (15Vout Models) 15.8 15.6 12.0 Vout (Volts) 12.6 Vout (Volts) 15.8 12.2 15.5 15.2 20 30 0 40 30 40 15.4 15.2 14.8 14.6 10 80 15.0 14.9 11.8 60 VOUT VS LOAD (±15Vout Models) 16.1 12.4 40 Load (mA) 12.8 0 20 Load (mA) VOUT VS LOAD (±12Vout Models) Vout (Volts) VOUT VS LOAD (12Vout Models) 6.3 Vout (Volts) Vout (Volts) VOUT VS LOAD (5Vout Models) 6.2 20 Load (mA) 40 60 80 0 20 10 Load (mA) Load (mA) EFFICIENCY VS LOAD Efficiency (%) 1.0 0.8 0.6 0.4 0.2 0.0 0 25 50 75 100 Load (mA) SAFE OPERATING AREA LOAD CAPACITANCE vs INPUT RISE TIME (5 Vout models) 600 50 Total Load Capacitance (uF) Total Load Capacitance (uF) 500 400 300 SAFE OPERATING AREA 200 40 30 SAFE OPERATING AREA 20 10 100 0 0 0 5 10 15 20 25 30 35 Rise Time of Input Voltage (mS) 40 45 5 10 15 20 25 30 35 40 45 50 Rise Time of Input Voltage (mS) LOAD CAPACITANCE vs INPUT RISE TIME (12 Vout models) NOTES: 1.) When operated within the SAFE OPERATING AREA as defined by the above curves, the output voltage of HL01U devices is guaranteed to be within 95% of its steady-state value within 100 milliseconds after the input voltage has reached 95% of its steadystate value. 80 70 60 50 SAFE OPERATING AREA 40 0 50 90 Total Load Capacitance (uF) LOAD CAPACITANCE vs INPUT RISE TIME (15 Vout models) 60 30 20 2.) For dual output models, total load capacitance is the sum of the capacitances on the plus and minus outputs. 10 0 0 5 10 15 20 25 30 35 40 45 50 Rise Time of Input Voltage (mS) Page 4 HL01UrevD,10/97