Thinki GBJ2502 25.0 ampere glass passivated flat bridge rectifier Datasheet

®
GBJ25005 thru GBJ2510
Pb
GBJ25005 thru GBJ2510
Pb Free Plating Product
25.0 AMPERE GLASS PASSIVATED FLAT BRIDGE RECTIFIERS
Features
Dimensions in inches and (millimeters)
GBJ
• Glass passivated chip junction
1.193(30.3)
1.169(29.7)
• Low forward voltage drop
HOLE FOR NO.
6 SCREW
.189(4.8)
.173(4.4)
.119
(0.5) .800(20.3)
.697(17.7) .441(11.2)
• High surge overload rating of 320 A peak
• Ideal for printed circuit board
.106(2.7)
.096(2.3)
.094(2.4)
.078(2.0)
.043(1.1)
.035(0.9)
Mechanical Data
.114(2.9)
.165(4.2) .708(18.0) .098(2.5)
.150(3.8) .669(17.0)
.402(1.1)
.386(0.9)
• Case: Molded plastic,GBJ(5S/6KBJ)
.425(10.8)
+ ~ ~ -
.303(7.7)
.287(7.3)
.150(3.8)
.134(3.4)
.184(3.4)
.122(3.1)
.031(0.8)
.023(0.6)
.303(7.7)
.287(7.3)
• Epoxy: UL 94V-0 rate flame retardant
• Terminals: Leads solderable per JESD22-B102,
Meet JESD 201 class 2 whisker test
• Mounting position: Any
Absolute Maximum Ratings and Characteristics
Ratings at 25 OC ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or
inductive load. For capacitive load, derate current by 20%.
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (TA=25°C unless otherwise noted)
PARAMETER
SYMBOL GBJ25005 GBJ2501 GBJ2502 GBJ2504 GBJ2506 GBJ2508 GBJ2510
UNIT
Maximum repetitive peak reverse voltage
VRRM
50
100
200
400
600
800
1000
V
Maximum RMS voltage
VRMS
35
70
140
280
420
560
700
V
Maximum DC blocking voltage
VDC
50
100
200
400
600
800
1000
V
Maximum average forward rectified current
IF(AV)
25
A
Peak forward surge current, 8.3 ms single half sine-wave
superimposed on rated load
IFSM
320
A
Rating for fusing (t<8.3ms)
I2t
508
A2s
Maximum instantaneous forward voltage (Note 1)
@ 12.5 A
@ 25 A
VF
1.0
1.1
V
Maximum reverse current @ rated VR
TJ=25°C
TJ=125°C
Typical thermal resistance
Operating junction temperature range
Storage temperature range
10
500
μA
RθJC
0.6
°C/W
TJ
- 55 to +150
°C
TSTG
- 55 to +150
°C
IR
Note 1: Pulse test with PW=300μs, 1% duty cycle
Rev.05
© 2006 Thinki Semiconductor Co., Ltd.
Page 1/2
http://www.thinkisemi.com/
®
GBJ25005 thru GBJ2510
RATINGS AND CHARACTERISTICS CURVES
(TA=25°C unless otherwise noted)
FIG. 2 MAXIMUM NON-REPETITIVE FORWARD
SURGE CURRENT
FIG.1 FORWARD CURRENT DERATING CURVE
350
PEAK FORWARD SURGE CURRENT (A)
30
AVERAGE FORWARD CURRENT (A)
25
20
15
10
Resister or
inductive load
with heat sink
5
0
50
60
70
80
90
100
110
120
130
140
150
8.3ms single half sine wave
300
250
200
150
100
50
1
10
NUMBER OF CYCLES AT 60 Hz
CASE TEMPERATURE (°C)
FIG. 3 TYPICAL REVERSE CHARACTERISTICS
FIG. 4 TYPICAL FORWARD CHARACTERISTICS
100
100
INSTANTANEOUS FORWARD CURRENT (A)
INSTANTANEOUS REVERSE CURRENT (μA)
100
10
TJ=125°C
1
0.1
TJ=25°C
0.01
0
20
40
60
80
100
120
140
PERCENT OF RATED PEAK REVERSE VOLTAGE (%)
10
TJ=125°C
1
TJ=25°C
0.1
0.2
0.4
0.6
0.8
1
1.2
1.4
INSTANTANEOUS FORWARD VOLTAGE (V)
FIG. 5 TYPICAL JUNCTION CAPACITANCE
JUNCTION CAPACITANCE (pF) A
1000
100
f=1.0MHz
Vsig=50mVp-p
10
0.1
1
10
100
REVERSE VOLTAGE (V)
Rev.05
© 2006 Thinki Semiconductor Co., Ltd.
Page 2/2
http://www.thinkisemi.com/
Similar pages