AZ832P POLARIZED DIP RELAY BISTABLE (LATCHING) FEATURES • • • • • • • • • • • Low profile DIP package Single and dual coil versions DC coils to 24 VDC High sensitivity, 42 mW pickup High switching capacity, 60 W, 250 VA Fits standard 16 pin IC socket Minimum switching load 10 mV, 10 µA Epoxy sealed Meets FCC Part 68.302 1500 V lightning surge Meets FCC Part 68.304 1000 V dielectric UL, CUR file E43203 CONTACTS GENERAL DATA Arrangement DPDT (2 Form C) Bifurcated crossbar contacts Ratings Resistive load: Max. switched power: 60 W or 250 VA Max. switched current: 3 A Max. switched voltage: 220 VDC* or 250 VAC * Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. Rated Load UL Life Expectancy Mechanical Electrical Minimum operations 2 x 107 1 x 105 at 2 A, 30 VDC or 1 A, 125 VAC 2 x 106 at 1 A, 30 VDC or .5 A, 125 VAC Set Time (typical) 3 ms at nominal coil voltage Reset Time (typical) 3 ms at nominal coil voltage Bounce (typical) 3 ms Dielectric Strength (at sea level) 1500 Vrms contact to coil (1 coil version) 1200 Vrms contact to coils (2 coil version) 1500 Vrms between contact sets 1000 Vrms across contacts Meets FCC Part 68.302 lightning surge Meets FCC Part 68.304 V dielectric 2 A at 30 VDC resistive 0.5 A at 60 VDC resistive 1 A at 120 VAC resistive Material Gold plated silver against palladium silver. Gold plated palladium silver against palladium silver (Suffix “A”) Insulation Resistance 1000 megohms min. at 20°C, 500 VDC, 50% RH Resistance < 50 milliohms initially Ambient Temperature Operating At nominal coil voltage -40°C (-40°F) to 85°C (185°F) Vibration 50 g at 10–500 Hz Shock 50 g Enclosure P.B.T. polyester Terminals Tinned copper alloy, P.C. Max. Solder Temp. 270°C (518°F) Max. Solder Time 5 seconds Max. Solvent Temp. 80°C (176°F) Max. Immersion Time 30 seconds Weight 5 grams COIL Power At Pickup Voltage (typical) Standard coil: 128 mW Sensitive coil: 96 mW Max. Continuous Dissipation 0.9 W at 20°C (68°F) Temperature Max. 115°C (239°F) NOTES 1. 2. 3. 4. All values at 20°C (68°F). Relay may pull in with less than “Must Operate” value. Relay has fixed coil polarity. For complete isolation between the relay’s magnetic fields, it is recommended that a .197" (5.0 mm) space be provided between adjacent relays. 5. Relay adjustment may be affected if undue pressure is exerted on relay case. 6. Specifications subject to change without notice. ZETTLER electronics GmbH Junkersstr. 3, D-82178 Puchheim, Germany - A ZETTLER GROUP Company phone: +49 89 800 97-0 [email protected] fax: +49 89 800 97-200 www.ZETTLERelectronics.com This product specification to be used only together with the application notes which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf 2014-09-25 AZ832P RELAY ORDERING DATA STANDARD SINGLE COIL COIL SPECIFICATIONS Nominal Coil VDC 3 Max. Continuous VDC 9.0 Coil Resistance ± 10% 90 Set Reset VDC 2.25 ORDER NUMBER* AZ832P1-2C-3DE 5 15.0 250 3.75 12 36.0 1,440 9.0 AZ832P1–2C–5DE AZ832P1–2C–12DE 24 60.0 4,000 18.0 AZ832P1–2C–24DE SENSITIVE SINGLE COIL 3 10.4 120 2.25 AZ832P1-2C-3DSE 5 17.2 330 3.75 AZ832P1–2C–5DSE 12 41.6 1,920 9.0 AZ832P1–2C–12DSE 24 83.1 7,680 18.0 AZ832P1–2C–24DSE STANDARD DUAL COIL COIL SPECIFICATIONS Nominal Coil VDC 3 Max. Continuous VDC 6.4 Coil Resistance ± 10% 45 Set Reset VDC 2.25 ORDER NUMBER* AZ832P2-2C-3DE 5 10.6 125 3.75 AZ832P2–2C–5DE 12 25.5 720 9.0 AZ832P2–2C–12DE 24 42.8 2,040 18.0 AZ832P2–2C–24DE SENSITIVE DUAL COIL 3 7.3 60 2.25 AZ832P2-2C-3DSE 5 12.3 167 3.75 AZ832P2–2C–5DSE 12 29.4 960 9.0 AZ832P2–2C–12DSE 24 58.8 3,840 18.0 AZ832P2–2C–24DSE *Add suffix “A” for gold plated palladium silver against palladium silver contact material. MECHANICAL DATA PC BOARD LAYOUT TWO COIL VERSION .048 [1.21] .394 MAX. [10.00] .795 MAX. [20.20] 2 1 4 8 13 11 9 10 x ø.039 [ø1.0] 10x .012±.005 [0.30±0.12] 3 x .200 [5.08] WIRING DIAGRAM WIRING DIAGRAM TWO COIL LATCHING SINGLE COIL LATCHING 6 8 + NOTE: 1 4 6 8 1 4 6 8 16 13 11 9 - 1 2 + 6 .300 [7.62] 16 15 10x .024±.005 [0.61±0.12] .048 [1.21] 4 .419 MAX. [10.65] .026 [0.66] .118 [3.00] .047 [1.19] .100 [2.54] + DIAGRAMS SHOW THE "RESET" 16 15 SET WITH POLARITY AS SHOWN 13 11 9 RESET SET + POSITION BEFORE ENERGIZED - 16 13 11 9 RESET (WATCH FOR POLARITY) (WATCH FOR POLARITY) VIEWED TOWARD TERMINALS VIEWED TOWARD TERMINALS Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" ZETTLER electronics GmbH Junkersstr. 3, D-82178 Puchheim, Germany - A ZETTLER GROUP Company phone: +49 89 800 97-0 [email protected] fax: +49 89 800 97-200 www.ZETTLERelectronics.com This product specification to be used only together with the application notes which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf 2014-09-25