Frontier Electronics Corp. 667 E. COCHRAN STREET, SIMI VALLEY, CA 93065 TEL: (805) 522-9998 FAX: (805) 522-9989 E-mail: [email protected] Web: http://www.frontierusa.com 25A HIGH CURRENT SILICON BRIDGE RECTIFIERS BP25-005 THRU BP25-10 FEATURES z CURRENT RATING 25A z REVERSE VOLTAGE RATING UP TO 1000V z TYPICAL IR LESS THAN 1μA z HIGH TEMPERATURE SOLDERING GUARANTEED: 260°C /10 SECONDS HOLE FOR No.10 SCREW 1.13(28.7) 1.12(28.4) HOLE FOR No.10 SCREW 0.2〞 (5.08)diam. 0.2〞 (5.08)diam. 0.652 (16.6) ＋ 1.13(28.7) 1.12(28.4) 0.657(16.7) 0.618(15.7) 0.728(18.5) 0.689(17.5) MECHANICAL DATA z CASE: METAL HEAT SINK CASE, ELECTRICALLY INSULATED z TERMINALS: UNIVERSAL .25” (6.3mm) FAST ON 0.094 (2.4) DIMENSIONS IN INCHES AND (MILLIMETERS) diam z MOUNTING METHOD: BOLT DOWN ON HEAT SINK WITH SILICON THERMAL COMPOUND BETWEEN BRIDGE AND MOUNTING SURFACE FOR MAXIMUM HEAT TRANSFER H* 0.442(11.23) EFFICIENCY 0.432(10.97) z WEIGHT: 20 GRAMS 0.469(11.90) 0.429(10.90) 0.752(19.10) 0.673(17.10) 0.565(14.35) 0.525(13.35) 0.25 (6.35) 0.042(1.07) 0.038(0.97) L* I* 1.00(25.40) 0.90(22.86) DIM H* I* L* MIN 0.295(7.5) 0.74(18.80) 1.09(27.89) 1.200 (30.5) MIN H* 0.442(11.23) 0.432(10.97) MAX 0.311(7.9) 0.84(21.30) - REMARK SUFFIX “S” THIN CASE SUFFIX “S” THIN CASE SUFFIX “S” THIN CASE MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS, RATINGS AT 25°C AMBIENT TEMPERATURE UNLESS OTHERWISE SPECIFIED SINGLE PHASE, HALF WAVE, 60 HZ, RESISTIVE OR INDUCTIVE LOAD. FOR CAPACITIVE LOAD, DERATE CURRENT BY 20% RATINGS SYMBOL BP25-005 BP25-01 BP25-02 BP25-04 BP25-06 BP25-08 BP25-10 UNITS MAXIMUM RECURRENT PEAK REVERSE VOLTAGE MAXIMUM RMS VOLTAGE MAXIMUM DC BLOCKING VOLTAGE MAXIMUM AVERAGE FORWARD RECTIFIED OUTPUT CURRENT AT TC=55°C PEAK FORWARD SURGE CURRENT SINGLE SINE-WAVE SUPERIMPOSED ON RATED LOAD STORAGE TEMPERATURE RANGE OPERATING TEMPERATURE RANGE VRRM VRMS VDC 50 35 50 100 70 100 200 140 200 400 280 400 600 420 600 800 560 800 1000 700 1000 V V V IO 25.0 A IFSM 300 A TSTG - 55 TO + 175 TOP - 55 TO + 175 °C °C ELECTRICAL CHARACTERISTICS (AT TA =25°C UNLESS OTHERWISE NOTED) CHARACTERISTICS SYMBOL BP25-005 BP25-01 BP25-02 BP25-04 BP25-06 BP25-08 BP25-10 UNITS MAXIMUM INSTANTANEOUS FORWARD VOLTAGE PER BRIDGE ELEMENT AT SPECIFIED CURRENT MAXIMUM REVERSE DC CURRENT AT RATED DC BLOCKING VOLTAGE PER ELEMENT NOTE: Suffix No. Versus Different Cases and Terminals VF 1.1 V IR 10 μA CASE SUFFIX No NORMAL METAL CASE THIN METAL CASE TERMINAL FAST ON TERMINALS WIRE LEAD TERMINALS IN LINE PIN CONFIGURATION BP25-005 THRU BP25-10 NORMAL PLASTIC CASE ALUMINUM BASE THIN PLASTIC CASE ALUMINUM BASE PS NO SUFFIX W S WS P PW PWS － － L LS Page: 1 RATINGS AND CHARACTERISTIC CURVES BP25-005 THRU BP25-10 FIG. 4 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT, AMPERES FIG. 1 -MAXIMUM OUTPUT RECTIFIED CURRENT AVERAGE FORWARD OUTPUT CURRENT, AMPERES 35 WITH (300mm2×1.5mm) COPPER 30 25 20 15 WITHOUT HEAT SINK 10 5 400 300 200 100 TJ=175℃ SINGLE SINE-WAVE (JEDEC Method) 40 1 1.5 2 3 4 5 6 7 8910 15 20 0 30 40 50 70100 NUMBER OF CYCLES AT 60HZ 20 40 60 80 100 120 140 160 180 CASE TEMPERATURE TC, ºC FIG. 5 - TYPICAL JUNCTION CAPACITANCE PER BRIDGE ELEMENT FIG. 2 - TYPICAL REVERSE CHARACTERISTICS AT TJ=25℃ CAPACITANCE, C.J. pF 1.0 0.1 500 400 300 250 200 TJ=25℃ f=1MHZ Vsig=50m Vp-p 150 100 60 .01 1 1.5 2 3 4 5 6 7 8910 15 20 0 20 40 60 80 100 120 30 40 50 70100 140 REVERSE VOLTAGE, VOLTS PERCENT OR RATED PEAK REVERSE VOLTAGE FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 1000 INSTANTANEOUS FORWARD CURRENT, AMPERES INSTANTANEOUS REVERSE CURRENT, MICROAMPERES 10 .442（11.23） 500 .432（10.97） 100 50 1.13（28.7） 1.12（28.4） － AC ＋ 10 .550 （13.9） 5 .75 （19.1） .140（3.6） .120（3.05） .040（1.2） 1.0 .200 （5.1） TJ=25℃ 300us Pulse Width 1% Duty Cycle 0.1 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 INSTANTANEOUS FORWARD VOLTAGE, VOLTS BP25-005 THRU BP25-10 BP25-L IN LINE PIN CONFIGURATION (PLASTIC CASE) Page: 2