Crimp Ring and Banding Backshells AS85049/85, AS85049/86, and AS85049/87 Banding Backshells Glenair Connector Designator F M85049/85-16 P 02 MIL-DTL-38999 Series I & II, 40M38277, PAN 6433-1, PATT 614, PATT 616, NFC93422 Series HE308 & HE309 Basic Part No.: M85049/85 = Straight M85049/86 = 45° M85049/87 = 90° Entry Size Finish N = Electroless Nickel P = Cadmium Olive Drab over Electroless Nickel with Polysulfide Sealant Strips W = 1,000 Hour Cadmium Olive Drab Over Electroless Nickel Shell Size Self Locking Coupling A Thread Typ. F 1.35 (34.3) Max C Typ. G E Dia P Finish Option (Typ.) Band Term. Area Free of Cadmium, Knurl or Ridges Mfr's Option K Dia H Polysulfide Strips J K Dia © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] 44-6 Crimp Ring and Banding Backshells AS85049/85, AS85049/86, and AS85049/87 Banding Backshells TABLE I Shell Size 08 10 12 14 16 18 20 22 24 A Thread Class 2B .438 - 28 UNEF .562 - 24 UNEF .688 - 24 UNEF .813 - 20 UNEF .938 - 20 UNEF 1.063 - 18 UNEF 1.188 - 18 UNEF 1.313 - 18 UNEF 1.438 - 18 UNEF C Dia Max .86 (21.8) .99 (25.1) 1.16 (29.5) 1.28 (32.5) 1.41 (35.8) 1.52 (38.6) 1.64 (41.7) 1.77 (45.0) 1.89 (48.0) F Max .87 (22.1) .90 (22.9) .92 (23.4) .95 (24.1) .98 (24.9) .98 (24.9) 1.01 (25.7) 1.04 (26.4) 1.07 (27.2) G Max 1.16 (29.5) 1.19 (30.2) 1.21 (30.7) 1.24 (31.5) 1.26 (32.0) 1.27 (32.3) 1.30 (33.0) 1.33 (33.8) 1.35 (34.3) TABLE II - Straight Only Shell Size 08 10 12 14 16 18 20 22 24 E Dia Entry Size 01 ±.010 (.3) N/A N/A .312 (7.9) .438 (11.1) .500 (12.7) .625 (15.9) .625 (15.9) .688 (17.5) .750 (19.1) H Max 1.375 (34.9) 1.437 (36.5) 1.562 (39.7) 1.687 (42.8) 1.750 (44.5) 1.875 (47.6) 1.938 (49.2) 2.062 (52.4) 2.125 (54.0) J Max 1.417 (36.0) 1.480 (37.6) 1.553 (39.4) 1.614 (41.0) 1.678 (42.6) 1.733 (44.0) 1.796 (45.6) 1.859 (47.2) 1.919 (48.7) TABLE III - 45° and 90° Only E Dia Entry Size 02 ±.010 (.3) .250 (6.4) .312 (7.9) .438 (11.1) .562 (14.3) .625 (15.9) .750 (19.1) .812 (20.6) .938 (23.8) 1.000 (25.4) Shell Size 08 10 12 14 16 18 20 22 24 K Dia Entry Size 02 ±.010 (.3) N/A N/A .312 (7.9) .438 (11.1) .500 (12.7) .625 (15.9) .625 (15.9) .688 (17.5) .750 (19.1) K Dia Entry Size 03 ±.010 (.3) .250 (6.4) .312 (7.9) .438 (11.1) .562 (14.3) .625 (15.9) .750 (19.1) .812 (20.6) .938 (23.8) 1.000 (25.4) 1. For complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] 44-7