DATA SHEET GBU6A THRU GBU6M SEMICONDUCTOR GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current - 6.0 Amperes FEATURES GBU •Plastic package has Underwriters Laboratory Flammability Unit:inch(mm) Classification 94V-0 •This series is UL listed under the Recognized Component Index, file number E54214 •High case dielectric 0.140 (3.56) 0.130 (3.30) 0.880 (22.3) 0.860 (21.8) 0.020 R (TYP.) 0.125 (3.2) x 45o strength of 1500 VRMS •Ideal for printed circuit boards •Glass passivated chip junctions 0.740 (18.8) 0.720 (18.3) •High surge overload rating •High temperature soldering guaranteed: 9o TYP. CHAMFER 0.160 (4.1) 0.140 (3.5) 0.310 (7.9) 0.290 (7.4) 0.075 (1.9) R. 0.085 (2.16) 0.065 (1.65) 0.080 (2.03) 0.060 (1.52) 260°C/10 seconds, 0.375" (9.5mm) lead length, 5o TYP. 5lbs. (2.3kg) tension 0.085 (2.16) •High temperature soldering : 260OC / 10 seconds at terminals •Pb free product at available : 99% Sn above meet RoHS environment substance directive request 0.075 (1.90) 0.710 (18.0) 0.690 (17.5) 0.100 (2.54) 0.085 (2.16) MECHANICAL DATA 0.050 (1.27) 0.040 (1.02) 0.080 (2.03) 0.065 (1.65) 0.022 (0.56) 0.018 (0.46) 0.190 (4.83) 0.210 (5.33) •Case: Molded plastic body over passivated chip •Terminals: Plated leads solderable per MIL-STD-750, Dimensions in inches and (millimeters) Method 2026 •Mounting Position: Any (NOTE 2) •Mounting Torque: 5 in. - lb. max. •Weight: 0.15 ounce, 4.0 grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS •Ratings at 25℃ambient temperature unless otherwise specified SYMBOLS GBU GBU GBU GBU GBU GBU GBU 6A 6B 6D 6G 6J 6K 6M UNITS Maximum Repetitive Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts VDC 50 100 200 400 600 800 1000 Volts Maximum DC Blocking Voltage Maximum average forward rectified output current at TC=100°C (NOTE 1, 2) Peak forward surge current single sine-wave superimposed on rated load (JEDEC Method)TJ=150°C Rating for fusing (t<8.3ms) Maximum instantaneous forward voltage drop per leg at 3.0A I(AV) 6.0 Amps IFSM 175.0 Amps I2t 127.0 A2sec VF 1.0 Volts Maximum DC reverse current at TA=25°C rated DC blocking voltage per leg TA=125°C 5.0 IR Typical junction capacitance per leg (NOTE 3) Cj Typical thermal resistance per leg (NOTE 1,2) RQJA 7.4 RQJC 2.2 TJ, TSTG -55 to +150 Operating junction and storage temperature range uA 500 211.0 94.0 pF ℃/W ℃ NOTES: (1) Units case mounted on 2.6 x 1.4 x 0.06" thick (6.5 x 3.5 x 0.15 cm) Al. Plate heatsink (2) Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum heat transfer with #6 screws (3) Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts http://www.yeashin.com 1 REV.02 20120305 DEVICE CHARACTERISTICS 6.0 FORWARD SURGE CURRENT, AMPERES pk (HALF SINE-WAVE) AVERAGE FORWARD CURRENT AMPERES GBU6A THRU GBU6M HEAT-SINK MOUNTING, T C (4 x 4 x 0.15cm)THK COPPER PLATE 4.0 2.0 MOUNTED ON PC BOARD, TA 0.5 (12.7mm)LEAD LENGTH 60Hz RESISTIVE OR INDUCTIVE LOAD 0 0 50 100 150 O TEMPERATURE, C 150 120 90 60 30 0 1 3 10 2 INSTANTANEOUS FORWARD CURRENT, AMPERES REVERSE CURRENT,uA 10 O T J =150 C 10 1 10 0 O T J =25 C 10 10 -1 -2 0 10 20 30 40 50 60 70 80 90 100 110 PERCENT OF PEAK REVERE VOLTAGE,% 40 60 100 100 40 20 10 4.0 2.0 1.0 O 0.4 TJ=25 C Pulse Width = 300us 1% DULY Cycle 0.2 0.1 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 INSTANTANEOUS FORWARD VOLTAGE, VOLTS Fig.3 - TYPICAL REVERSE CHARACTERISTICS http://www.yeashin.com 20 Fig.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT RECTIFIED CURRENT 4 10 NO. OF CYCLES AT 60Hz Fig.1 - DERATING CURVE FOR OUTPUT 10 6 2 2 Fig.4 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PER ELEMENT REV.02 20120305