0402 Ceramic RF Chip Inductors ECM’s EC0402 (1005) series chip inductor is currently the smallest comonent avaliable, of its type. It is produced using our state of the art production process to offer unrivalled quality and superb value. This technology offers better ‘Q’ performance vs. frequency than multilayer and most thin film inductors, which is achieved by laser cutting a perfect helix into the surface of the metalised coil body. Its Gold plated terminations ensure excellent solderability by reflow and wave soldering processes as well as with many conductive adhesives. § § § § § Dimensions l x w x h (mm) 1.0 x 0.5 x 0.5 Terminals Gold (Au) IEC climatic category 40/085/56 Soldering IR, vapor phase, wave soldering Delivery mode: 8mm paper tape. § § Minimum order quantity 3500 pcs (1 ∅180mm reel) § § § Core Material Ceramic (Al2 O3) Epoxy Encapsulated Metallization Ni-Cu-Ni-Au ECM Electronics Limited, Penmaen House, Ashington, West Sussex, RH20 3JR, UK Tel: +44(0)1903 892810: Fax: +44(0)1903 892738. Email: [email protected] Although we have attempted to accurately reflect the products we market. ECM reserve the right without prior notice to discontinue any product or make design changes we believe necessary. 0402 Ceramic RF Chip Inductors ECM Part EC0402A-1N0 EC0402A-1N2 EC0402A-1N5 EC0402A-1N8 EC0402A-2N2 EC0402A-2N7 EC0402A-3N3 EC0402A-3N9 EC0402A-4N7 EC0402A-5N6 EC0402A-6N8 EC0402A-8N2 EC0402A-010 EC0402A-012 EC0402A-015 EC0402A-018 EC0402A-022 EC0402A-027 EC0402A-033 EC0402A-039 L (nH) 1.0 @100MHz 1.2 @100MHz 1.5 @100MHz 1.8 @100MHz 2.2 @100MHz 2.7 @100MHz 3.3 @100MHz 3.9 @100MHz 4.7 @100MHz 5.6 @100MHz 6.8 @100MHz 8.2 @100MHz 10 @100MHz 12 @100MHz 15 @100MHz 18 @100MHz 22 @100MHz 27 @100MHz 33 @100MHz 39 @100MHz Tol % J J J J J J J J J J J J J J J J J J J J Q Min. (100MHz) Q Typ (800 MHz) 8 8 8 8 8 8 7 7 7 7 7 7 7 7 7 7 7 7 7 7 32 32 32 32 32 30 30 30 28 28 28 28 26 24 22 21 20 22 25 25 SRF Min. (MHz) 6000 6000 6000 6000 6000 6000 5500 5500 4800 4600 3550 3500 2800 2800 2500 2300 2000 2000 1800 1800 RDC MAX (Ω Ω) 0.05 0.06 0.07 0.08 0.09 0.10 0.12 0.15 0.17 0.19 0.30 0.35 0.41 0.45 0.60 0.70 0.80 1.20 1.40 1.70 IDC IN (mA) 400 400 400 400 400 400 400 360 360 340 320 320 320 320 240 240 200 200 170 150 TOLERANCE : J=5% ECM Electronics Limited, Penmaen House, Ashington, West Sussex, RH20 3JR, UK Tel: +44(0)1903 892810: Fax: +44(0)1903 892738. Email: [email protected] Although we have attempted to accurately reflect the products we market. ECM reserve the right without prior notice to discontinue any product or make design changes we believe necessary.