PD-96037 HEXFRED HFA08TB60SPbF TM Ultrafast, Soft Recovery Diode Features Ultrafast Recovery Ultrasoft Recovery Very Low IRRM Very Low Qrr Specified at Operating Conditions Lead-Free Benefits Reduced RFI and EMI Reduced Power Loss in Diode and Switching Transistor Higher Frequency Operation Reduced Snubbing Reduced Parts Count (K) VR = 600V BASE + 2 VF(typ.)* = 1.4V IF(AV) = 8.0A Qrr (typ.)= 65nC IRRM = 5.0A (N/C) 1 - 3 _- (A) trr(typ.) = 18ns di(rec)M/dt (typ.) = 240A/µs Description International Rectifier's HFA08TB60S is a state of the art ultra fast recovery diode. Employing the latest in epitaxial construction and advanced processing techniques it features a superb combination of characteristics which result in performance which is unsurpassed by any rectifier previously available. With basic ratings of 600 volts and 8 amps continuous current, the HFA08TB60S is especially well suited for use as the companion diode for IGBTs and MOSFETs. In addition to ultra fast recovery time, the HEXFRED product line features extremely low values of peak recovery current (IRRM) and does not exhibit any tendency to "snap-off" during the tb portion of recovery. The HEXFRED features combine to offer designers a rectifier with lower noise and significantly lower switching losses in both the diode and the switching transistor. These HEXFRED advantages can help to significantly reduce snubbing, component count and heatsink sizes. The HEXFRED HFA08TB60S is ideally suited for applications in power supplies (PFC Boost diode) and power conversion systems (such as inverters), motor drives, and many other similar applications where high speed, high efficiency is needed. D2 Pak Absolute Maximum Ratings Parameter VR IF @ TC = 100°C IFSM IFRM PD @ TC = 25°C PD @ TC = 100°C TJ TSTG Cathode-to-Anode Voltage Continuous Forward Current Single Pulse Forward Current Maximum Repetitive Forward Current Maximum Power Dissipation Maximum Power Dissipation Operating Junction and Storage Temperature Range Max. Units 600 8.0 60 24 36 14 V -55 to +150 A W °C * 125°C www.irf.com 1 10/07/05 HFA08TB60SPbF Electrical Characteristics @ TJ = 25°C (unless otherwise specified) Parameter VBR Cathode Anode Breakdown Voltage VFM Max Forward Voltage IRM Max Reverse Leakage Current CT LS Min. Typ. Max. Units Junction Capacitance 600 1.4 1.7 1.4 0.3 100 10 1.7 2.1 1.7 5.0 500 25 Series Inductance 8.0 V V µA pF nH Test Conditions IR = 100µA IF = 8.0A See Fig. 1 IF = 16A IF = 8.0A, T J = 125°C See Fig. 2 VR = VR Rated TJ = 125°C, VR = 0.8 x VR RatedD Rated See Fig. 3 VR = 200V Measured lead to lead 5mm from package body Dynamic Recovery Characteristics @ TJ = 25°C (unless otherwise specified) Parameter t rr trr1 trr2 IRRM1 IRRM2 Qrr1 Qrr2 di(rec)M/dt1 di(rec)M/dt2 Reverse Recovery Time See Fig. 5, 6 Peak Recovery Current Reverse Recovery Charge See Fig. 7 Peak Rate of Fall of Recovery Current See Fig. 8 During tb Min. Typ. Max. Units 18 37 55 3.5 4.5 65 124 240 210 55 90 5.0 8.0 138 360 ns A nC A/µs Test Conditions IF = 1.0A, dif/dt = 200A/µs, VR = 30V TJ = 25°C TJ = 125°C IF = 8.0A TJ = 25°C TJ = 125°C V R = 200V TJ = 25°C TJ = 125°C dif/dt = 200A/µs TJ = 25°C TJ = 125°C Thermal - Mechanical Characteristics Parameter Tlead RthJC RthJA Wt Lead Temperature Thermal Resistance, Junction to Case Thermal Resistance, Junction to Ambient Weight Min. Typ. Max. Units 2.0 0.07 300 3.5 80 °C K/W g (oz) 0.063 in. from Case (1.6mm) for 10 sec Typical Socket Mount 2 www.irf.com HFA08TB60SPbF 1000 Reverse Current - IR (µA) 10 TJ = 150°C TJ = 125°C TJ = 150°C 100 TJ = 125°C 10 1 0.1 TJ = 25°C 0.01 0.001 0 100 TJ = 25°C 200 300 400 500 600 Reverse Voltage - V R (V) Fig. 2 - Typical Reverse Current vs. Reverse Voltage 1 100 0.1 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 Forward Voltage Drop - V FM (V) Fig. 1 - Maximum Forward Voltage Drop vs. Instantaneous Forward Current Junction Capacitance -CT (pF) Instantaneous Forward Current - IF (A) 100 A TJ = 25°C 10 1 1 10 100 1000 Reverse Voltage - V R (V) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage Thermal Response (Z thJC ) 10 D = 0.50 1 0.20 0.10 0.05 0.1 0.01 0.00001 0.02 0.01 PDM SINGLE PULSE (THERMAL RESPONSE) t1 t2 Notes: 1. Duty factor D = t 1 / t 2 2. Peak T J = P DM x Z thJC + TC 0.0001 0.001 0.01 0.1 1 t1, Rectangular Pulse Duration (sec) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics www.irf.com 3 HFA08TB60SPbF 20 80 VR = 200V TJ = 125°C TJ = 25°C I F = 16A I F = 8.0A I F = 4.0A 60 15 I F = 8.0A Irr- ( A) trr- (nC) IF = 16A IF = 4.0A 40 10 20 5 VR = 200V TJ = 125°C TJ = 25°C 0 100 di f /dt - (A/µs) 0 100 1000 Fig. 5 - Typical Reverse Recovery vs. dif/dt 1000 di f /dt - (A/µs) Fig. 6 - Typical Recovery Current vs. dif/dt 10000 500 VR = 200V TJ = 125°C TJ = 25°C VR = 200V TJ = 125°C TJ = 25°C 400 I F = 16A di (rec) M/dt- (A /µs) I F = 16A Qrr- (nC) I F = 8.0A 300 I F = 4.0A 200 I F = 8.0A I F = 4.0A 1000 100 0 100 di f /dt - (A/µs) Fig. 7 - Typical Stored Charge vs. dif/dt 4 1000 100 100 1000 di f /dt - (A/µs) Fig. 8 - Typical di(rec)M/dt vs. dif/dt www.irf.com HFA08TB60SPbF 3 t rr IF REVERSE RECOVERY CIRCUIT tb ta 0 Q rr VR = 200V 2 I RRM 4 0.5 I RRM di(rec)M/dt 0.01 Ω 0.75 I RRM L = 70µH D.U.T. dif/dt ADJUST D G IRFP250 S Fig. 9 - Reverse Recovery Parameter Test Circuit www.irf.com 5 1 di f /dt 1. dif/dt - Rate of change of current through zero crossing 2. I RRM - Peak reverse recovery current 3. trr - Reverse recovery time measured from zero crossing point of negative going IF to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current 4. Qrr - Area under curve defined by trr and I RRM trr X IRRM Q rr = 2 5. di(rec)M/dt - Peak rate of change of current during t b portion of trr Fig. 10 - Reverse Recovery Waveform and Definitions 5 HFA08TB60SPbF D2PAK Package Outline Dimensions are shown in millimeters (inches) D2PAK Part Marking Information T HIS IS A HFA08T B60S INT ERNAT IONAL RECT IFIER LOGO (K) AS SEMBLY LOT CODE (N/C) (A) 6 PART NUMBER DAT E CODE YY = YEAR WW = WEEK P = DESIGNAT ES LEAD-FREE PRODUCT (OPTIONAL) www.irf.com HFA08TB60SPbF D2PAK Tape & Reel Information Dimensions are shown in millimeters (inches) Data and specifications subject to change without notice. This product has been designed and qualified for the Consumer market. Qualifications Standards can be found on IR’s Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information.10/05 www.irf.com 7