CT CTEP125U-2R2M Power inductors - shielded Datasheet

Power Inductors - Shielded
CTEP125U Series
From 0.3 µH to 5.6 µH
SPECIFICATIONS
Parts are available in ±20% only.
* This indicates the current when the inductance decreases to 75% over it’s nominal value or DC current
when the temperature rising ∆T=40°C lower, whichever is lower.
CTEP125UF Please specify “F” for RoHS compliant
Inductance
(µH ±20%)
L Test
Freq.
(kHz)
CTEP125U_-0R3M
CTEP125U_-0R6M
CTEP125U_-0R8M
0.3
0.6
0.8
100
100
100
2.5
2.5
2.5
35.0
30.0
27.2
CTEP125U_-1R4M
CTEP125U_-2R2M
CTEP125U_-3R2M
CTEP125U_-4R3M
CTEP125U_-5R6M
1.4
2.2
3.2
4.3
5.6
100
100
100
100
100
3.4
5.4
8.0
11.4
13.5
20.8
14.8
12.8
11.0
9.5
Part
Number
Not shown at actual size.
RoHS
Compliant
Available
ctparts.com
DCR
Max.
Ω)
(mΩ
*Current
(A)
PHYSICAL DIMENSIONS
Size
mm
inches
A
B
C
Max.
Max.
Max.
12.9
12.9
5.8
2.6±.2
7.0±.2
4.0±.2
.51
.51
.23
.10±.01
.28±.01
.16±.01
CHARACTERISTICS
Description: SMD shielded power inductor
Applications: Power supplies for VTR, OA equipment, LCD
televisions, PC notebooks, portable communication equipment,
DC/DC converters, etc.
Operating Temperature: -30°C to +100°C
Inductance Tolerance: ±20%
Testing: Tested on a HP4285A at 100 KHz , 0.25Vrms , 0Adc
Packaging: Tape & Reel
Marking: Parts are marked with inductance code
Miscellaneous: RoHS Compliant available.
Additional Information: Additional electrical & physical
information available upon request
Samples available. See website for ordering information.
PAD LAYOUT
CENTRAL
Technologies
01.03.06
Manufacturer of Inductors, Chokes, Coils, Beads, Transformers & Toroids
800-684-5322 Inside US
949-453-1811 Outside US
Copyright © 2006 by CT Magnetics, DBA Central Technologies. All rights reserved.
CT Magnetics reserves the right to make improvements or change specifications without notice
D
E
F
G
H
4.2±.2
2.5±.2
0.17±0.1 .10±.01
Similar pages