HLMP-PB00-N0000/HLMP-PM00-N0000 HLMP-QB00-S0000/HLMP-QM00-S0000 Subminiature Blue and Green InGaN LED Lamps Data Sheet Description Features Flat Top Package x Subminiature flat top package Ideal for backlighting and light piping applications The HLMP-Pxxx flat top lamps use an untinted, nondiffused, truncated lens to provide a wide radiation pattern that is necessary for use in backlighting applications. The flat top lamps are also ideal for use as emitters in light pipe applications. x Subminiature dome package Nondiffused dome for high brightness x Colors: 468 nm blue, 525 nm green Dome Package x Ideal for space limited applications The HLMP-Qxxx dome lamps use an untinted, nondiffused lens to provide a high luminous intensity within a narrow radiation pattern. x Available with lead configurations for surface mount and through hole PC board mounting x Axial leads Lead Configurations Applications All these devices are made by encapsulating LED chip on axial lead frames to form molded epoxy subminiature lamps. A variety of package configuration options is available. These include special surface mount lead configurations, gull wing, yoke lead, or Z-bend. Right angle lead bend at 2.54 mm (0.100 inch) and 5.08 mm (0.200 inch) center spacing are available for through hole mounting. For more information refer to Standard SMT and Through Hole Lead Bend Options for Subminiature Lamps data sheet. x Consumer x Industrial x Computer peripheral x Communication CAUTION: HLMP-xB00 and HLMP-xM00 LEDs are Class 2 ESD sensitive. Please observe appropriate precautions during handling and processing. Refer to Avago Application Note AN-1142 for additional details. Package Dimensions (A) Flat Top Lamps 0.50 (0.020) REF. 1.40 (0.055) 1.65 (0.065) 11.68 (0.460) 10.67 (0.420) BOTH SIDES CATHODE 0.46 (0.018) 0.56 (0.022) ANODE 1.65 (0.065) DIA. 1.91 (0.075) 0.20 (0.008) MAX. 0.25 (0.010) MAX.* NOTE 2 2.21 (0.087) 1.96 (0.077) 1.14 (0.045) 1.40 (0.055) 0.63 (0.025) 0.38 (0.015) 2.44 (0.096) 1.88 (0.074) 0.79 (0.031) MAX. 0.18 (0.007) 0.23 (0.009) 2.08 (0.082) 2.34 (0.092) CATHODE STRIPE NOTES: 1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES). 2. PROTRUDING SUPPORT TAB IS CONNECTED TO CATHODE LEAD. * REFER TO FIGURE 1 FOR DESIGN CONCERNS. 2 Package Dimensions B) Domed Lamps 0.50 (0.020) REF. 11.68 (0.460) 10.67 (0.420) BOTH SIDES CATHODE 0.46 (0.018) 0.56 (0.022) ANODE 1.65 (0.065) DIA. 1.91 (0.075) 0.20 (0.008) MAX. 0.18 (0.007) 0.23 (0.009) 0.25 (0.010) MAX.* NOTE 2 2.21 (0.087) 1.96 (0.077) 0.76 (0.030) R. 0.89 (0.035) 0.94 (0.037) 1.24 (0.049) 2.03 (0.080) 1.78 (0.070) 2.92 (0.115) MAX. 0.79 (0.031) 0.53 (0.021) 0.63 (0.025) 0.38 (0.015) 2.08 (0.082) 2.34 (0.092) CATHODE STRIPE NOTES: 1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES). 2. PROTRUDING SUPPORT TAB IS CONNECTED TO CATHODE LEAD. * REFER TO FIGURE 1 FOR DESIGN CONCERNS. 3 CATHODE TAB NO. ANODE DOWN. YES. CATHODE DOWN. Figure 1. Proper right angle mounting to a PC board to prevent protruding cathode tab from shorting to anode connection. Device Selection Guide Part Number Color Viewing Angle 2T1/2 Package Description Package Outline HLMP-PB00-N0000 Blue 85q Flat Top, Nondiffused, Untinted A HLMP-PM00-N0000 Green 12q Domed, Nondiffused, Untinted B HLMP-QB00-S0000 Blue HLMP-QM00-S0000 Green Ordering Information HLMX-XXXX-X X X X X Packaging Option Color Bin Selection Max. Iv Bin Min. Iv Bin 4 x 4 Prod. Part Number 4 Absolute Maximum Ratings at TA = 25qC Parameter Value Peak Forward Current 90 mA DC Forward Current[1] 30 mA Power Dissipation 110 mW Reverse Voltage (IR = 100 μA) 5V Operating Temperature Range –40qC to +85qC Storage Temperature Range –55qC to +100qC LED Junction Temperature 110qC Lead Soldering Temperature [1.6 mm (0.063 in.) from body] 260qC for 5 seconds SMT Reflow Soldering Temperature 260qC for 20 seconds Note: 1. Derate linearly as shown in Figure 5. Optical Characteristics at TA = 25qC Luminous Intensity Iv (mcd) @ IF = 20 mA Part Number Min. Typ. Color, Peak Wavelength OPEAK (nm) Typ. Dominant Wavelength Od (nm) Typ. Spectral Halfwidth - O1/2 (nm) Typ. Viewing Angle 2T1/2 Degrees Typ. Luminous Efficacy Kv (lm/W) HLMP-PB00-N0000 25 60 470 468 26 85 70 HLMP-PM00-N0000 25 200 523 525 36 85 500 HLMP-QB00-S0000 160 290 470 468 26 12 70 HLMP-QM00-S0000 160 690 523 525 36 12 500 Electrical Characteristics at TA = 25qC Forward Voltage VF (Volts) @ IF = 20 mA Part Number Typ. Max. Reverse Breakdown VR (Volts) @ IR = 100 μA Min. HLMP-PB00-N0000 3.7 4.1 5 52 170 HLMP-PM00-N0000 3.7 4.1 5 52 170 HLMP-QB00-S0000 3.7 4.1 5 52 170 HLMP-QM00-S0000 3.7 4.1 5 52 170 5 Capacitance C (pF), VF = 0, f = 1 MHz Typ. Thermal Resistance RTJ-PIN (qC/W) Typ. BLUE 0.8 GREEN 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 380 430 480 530 580 630 680 730 780 35 1.6 30 1.4 RELATIVE INTENSITY RELATIVE INTENSITY 0.9 IF – FORWARD CURRENT – mA 1.0 25 20 15 10 5 0 2 3 4 0.4 0 5 10 15 20 25 Figure 4. Relative luminous intensity vs. DC forward current. 1 35 30 25 20 RθJ-A = 400°C/W 15 RθJ-A = 550°C/W 10 0.8 0.6 0.4 0.2 5 0 0 20 40 60 80 100 0 -90 -60 -30 30 60 Figure 6. Relative luminous intensity vs. angular displacement for HLMP-Qxxx. 1.0 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 -90 -80 -70 -60 -50 -40 -30 -20 -10 0 ANGULAR DISPLACEMENT - DEGREES 0.9 0 10 20 30 40 50 60 70 80 90 ANGLE – DEGREES Figure 7. Relative luminous intensity vs. angular displacement for HLMP-Pxxx. 30 DC FORWARD CURRENT – mA Figure 3. Forward current vs. forward voltage. Figure 5. Maximum forward current vs. ambient temperature. Derating based on TJMAX = 110½C. RELATIVE INTENSITY 0.8 0.6 0 5 VF – FORWARD VOLTAGE – V NORMALIZED INTENSITY MAXIMUM FORWARD CURRENT – mA 1 AMBIENT TEMPERATURE – °C 6 1.0 0.2 0 WAVELENGTH – nm Figure 2. Relative intensity vs. wavelength. 1.2 90 35 Intensity Bin limits Color Bin limits Bin Min. Max. Package N P Bin 25 50 Blue 0 Full Distribution 40 80 1 460 464 Q 63 125 2 464 468 R 100 200 3 468 472 S 160 320 4 472 476 T 250 500 5 476 480 U 400 800 6 480 484 V 630 1250 0 Full Distribution W 1000 2000 3 520 525 X 1600 3200 4 525 530 Y 2500 5000 5 530 535 6 535 540 Green Tolerance of each bin limit = ± 2 nm. Mechanical Option 00 Straight Leads, Bulk Packaging, Quantity of 500 Parts 11 Gull Wing Leads, 12 mm Tape on 7 in. Dia. Reel, 1500 Parts per Reel 12 Gull Wing Lead, Bulk Packaging, Quantity of 500 Parts 14 Gull Wing Leads, 12 mm Tape on 13 in. Dia. Reel, 6000 Parts per Reel 21 Yoke Leads, 12 mm Tape on 7 in. Dia. Reel, 1500 Parts per Reel 22 Yoke Leads, Bulk Packaging, Quantity of 500 Parts 24 Yoke Leads, 12 mm Tape on 13 in. Dia. Reel, 6000 Parts per Reel 31 Z-Bend Leads, 12 mm Tape on 7 in. Dia. Reel, 1500 Parts per Reel 32 Z-Bend Leads, Bulk Packaging, Quantity of 500 Parts 34 Z-Bend Leads, 12 mm Tape on 13 in. Dia. Reel, 6000 Parts per Reel Note: All Categories are established for classification of products. Products may not be available in all categories. Please contact your local Avago representative for further clarification/information. For product information and a complete list of distributors, please go to our website: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright © 2005-2009 Avago Technologies. All rights reserved. Obsoletes AV01-0472EN AV02-0336EN - November 13, 2009 Min. Max.