MAPD-009850-HW1268 E-Series 2-Way 90° Power Divider 112-168 MHz M/A-COM Products Rev. V1 Features Product Image 2-way 90 Degree Surface Mount Tape and reel packaging available 260°C Reflow Compatible RoHS* compliant Description M/A-COM’ s MAPD-009850-HW1268 is a RoHS Compliant 2-way 90˚ power divider in a low cost, surface mount package. Ideally suited for high volume cellular, wireless applications. The MAPD-009850-HW1268 is available in a SM-89 surface mount package and is designed to be utilized in both RoHS and standard reflow profiles. Parts are packaged in tape & reel. Ordering Information Part Number Package MAPD-009850-HW1268 Tape and Reel (900 piece Reel) Electrical Specifications: TA = 25°C, Z0 = 50 Frequency Range Test Conditions Units Min. Typ. Max. Insertion Loss Isolation Amplitude Unbalance Phase Unbalance Input Return Loss 112 - 168 MHz dB — 0.5 1.2 112 - 168 MHz dB 18 23 — 112 - 168 MHz 112 - 168 MHz dB — 1.0 2.0 0 — 1° 2° dB 20 24 — 112 - 168 MHz Absolute Maximum Ratings 1,2 Pin Configuration Parameter Absolute Maximum Pin No. Function Impedance 50 Ohms nominal Input 1 RF Power 1 Watt Port 1 4 Internal Load Dissipation 0.125 Watt Port 2 6 Operating Temperature -40°C to +85°C External 50 Ohms 3 Storage Temperature -55°C to +125°C Not Connected 2,5 1. Exceeding any one or combination of these limits may cause permanent damage to this device. 2. M/A-COM does not recommend sustained operation near these survivability limits. 1 * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for • North America Tel: 800.366.2266 / Fax: 978.366.2266 development. Performance is based on target specifications, simulated results, and/or prototype • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under developVisit www.macom.com for additional data sheets and product information. ment. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or volume is not guaranteed. information contained herein without notice. MAPD-009850-HW1268 E-Series 2-Way 90° Power Divider 112-168 MHz M/A-COM Products Rev. V1 Typical Performance Curves SM - 89 Package dB Insertion Loss Port 1 1 0.5 0 -0.5 -1 -1.5 112 120 128 136 144 152 160 168 MHz dB Insertion Loss port 2 1 0.5 0 -0.5 -1 -1.5 112 120 128 136 144 152 160 168 MHz -87 Degree dB Dimensions are inches (millimeters) ± 0.015 (0.38) unless otherwise specified. Phase Unbalance Amplitude Unbalance 3 2 1 0 -1 -2 -3 112 120 128 136 144 152 160 -88 -89 -90 112 168 120 128 136 MHz 152 160 168 152 160 168 MHz Isolation Input Return Loss -15 -17 -19 -21 -23 -25 -10 -15 dB dB 144 -20 -25 -30 112 120 128 136 144 152 160 168 112 120 128 136 MHz 144 MHz 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for • North America Tel: 800.366.2266 / Fax: 978.366.2266 development. Performance is based on target specifications, simulated results, and/or prototype • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under developVisit www.macom.com for additional data sheets and product information. ment. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or volume is not guaranteed. information contained herein without notice.