TT OPF480 Fiber optic detector Datasheet

FIBER OPTIC DETECTOR
OPF480
Features:
•
•
•
•
•
Electrically isolated plas c cap package
High speed, low capacitance
Designed to self align in the 0.228 diameter bore of standard fiber op c
receptacles.
Press fit simplified component installa on
100MHz opera on minimum
DescripƟon:
The OPF480 is a low noise silicon PIN photodiode mounted in a low cost package for fiber op c applica ons. It offers fast
response at moderate bias and is compa ble with LED and laser diode sources in the 800-1000 nm wavelength region. Low
capacitance improves signal to noise performance in typical short haul LAN applica ons.
The OPF480 is designed to be compa ble with mul mode
op cal fibers from 50/125 to 200/300 microns.
ApplicaƟons:
• Industrial Ethernet equipment
• Copper-to-fiber media conversion
• Intra-system fiber op c links
• Video surveillance systems
RoHS
General Note
TT Electronics reserves the right to make changes in product specificaƟon
without noƟce or liability. All informaƟon is subject to TT Electronics’ own data
and is considered accurate at Ɵme of going to print.
© TT electronics plc
DIMENSIONS ARE IN:
[MILLIMETERS]
INCHES
1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200
www.optekinc.com | www. electronics.com
Issue B
08/2015
Page 1
FIBER OPTIC DETECTOR
OPF480
Electrical SpecificaƟons
Absolute Maximum RaƟngs (TA = 25° C unless otherwise noted)
Storage Temperature Range
-55° C to +115° C
Opera ng Temperature Range
-40° C to +100° C
Lead Soldering Temperature(1)
260° C
Con nuous Power Dissipa on
(2)
200 mW
Maximum Reverse Voltage
100 VDC
Electrical CharacterisƟcs (TA = 25° C unless otherwise noted)
SYMBOL
PARAMETER
MIN
TYP
0.45
0.55
MAX
UNITS
VR = 5.0V; 50/125µm fiber; λ = 850nm
R
Responsivity
ID
Dark Current
0.1
λp
Peak Response Wavelength
905
nm
tr
Output Rise Time
2.0
ns
VR = 5V; RL = 50W, 10%-90%
CT
Total Capacitance
1.5
pF
VR = 5V
Field of View
80
FoV
A/W
TEST CONDITIONS
5.0
2.0
nA
VR = 5.0V
deg
Notes:
1. Maximum of 5 seconds with soldering iron. Dura on can be extended to 10 seconds when flow soldering. RMA flux is recommended.
2. De-rate linearly at 2.13mW/°C above 25°C .
General Note
TT Electronics reserves the right to make changes in product specificaƟon
without noƟce or liability. All informaƟon is subject to TT Electronics’ own data
and is considered accurate at Ɵme of going to print.
© TT electronics plc
1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200
www.optekinc.com | www. electronics.com
Issue B
08/2015
Page 2
FIBER OPTIC DETECTOR
OPF480
Performance
General Note
TT Electronics reserves the right to make changes in product specificaƟon
without noƟce or liability. All informaƟon is subject to TT Electronics’ own data
and is considered accurate at Ɵme of going to print.
© TT electronics plc
1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200
www.optekinc.com | www. electronics.com
Issue B
08/2015
Page 3
Similar pages