ASM-16 Description ASM-16 Addressable Switch Module • The Gamewell-FCI, ASM-16 Addressable Switch Module serves as the point of interface between an operator and the system’s audio evacuation, fire fighter intercom, and building control circuits. It is a component of the following systems: • E3 Series® Expandable Emergency Evacuation System • E3 Series Combined Fire and Mass Notification System • E3 Series Broadband Voice Evacuation System • NetSOLO® System The ASM-16 is a configurable switch input sub-assembly with 16 switches and 48 status LEDs. It may be remotely located via the RS-485 serial interface. Each ASM-16 addressable switch module has 16 push-button switches that can be programmed to serve any function the application demands. An ASM-16 switch can be programmed to operate as any of the following functions: • speaker circuit switch • fire fighter phone switch • auxiliary control switch • switches with custom-defined functions: (using a bank of 2 - system reset switches - system silence (1 switch each for - system acknowledge on-off-auto functions). - all-call, phone patch - lamp test, alarm tone on - manual select, etc. Each ASM-16 switch also has 3 fully programmable LEDs that appear in red, yellow, and green. These LEDs can be programmed to work in concert with their associated pushbutton switch or they can be programmed to work independently as status indicators (e.g. on, off, normal, etc.). An INI-VGC assembly or ILI-MB-E3/ILI95-MB-E3 can accommodate up to 16 ASM-16 modules for a total of 256 switches and 768 LEDs. • • Rear View Front View • Features • Listed under UL® Standard 864, 9th Edition. • Listed under UL® Standard UL2572 for Mass Notification. • Each INI-VGC supports up to 16 ASM-16 switch modules for a total of 256 switches. • Each ILI-MB-E3/ILI95-MB-E3 supports up to 16 ASM-16 switch modules for a total of 256 switches. • Each ASM-16 switch has 3 fully programmable status, indicating LEDS: red, yellow, and green. • All switch functions are fully software programmable. • Slip-in label inserts allow easily modified switch designations. • Ordering Information Part Number 1100-0455 • Specifications • Operating Voltage: 24 VDC (nominal) (from the PM-9/PM-9G power supply) Operating Current: 0.011 amp. (with no LEDs lit) Operating Temperature: 32° to 120° F (0° to 49° C) Relative Humidity: 0 to 93% (non-condensing) at 90° F (32° C) Description Programmable Addressable Switch Module SIGNALING FM ® ® E3 Series and NetSOLO are registered trademarks of Honeywell International Inc. ® UL is a registered trademark of Underwriters Laboratories Inc. MEA Approved FDNY: 3017416 COA # 231-06-E 7165-1703:0125 7170-1703:0126 APPROVED S1869 City of City of Chicago Denver Approved Approved Class1 Class2 High Rise GAMEWELL-FCI 12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118 Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use. www.gamewell-fci.com 9020-0554 Rev. O page 1 of 1 ©2013 by Honeywell International Inc. All rights reserved.