JWE06 Series DC-DC Converter 6 Watts xxx Series • Regulated Single & Dual Output • Ultra Wide 4:1 Input Range • DIP16 Package • 1500 VDC Isolation • Operating Temperature -40 °C to +105 °C • Full Power to +75 °C • ITE Safety Approvals • High Power Density • Metal Case Dimensions: • 3 Year Warranty JWE06: 0.94 x 0.54 x 0.31” (23.8 x 13.7 x 8.0 mm) Models & Ratings Input voltage Output voltage Output current 3.3 V 1500 mA 5.0 V 1200 mA 12.0 V 500 mA 15.0 V 400 mA 24.0 V 9-36V 18-75V Input current(1) Max. capacitive load(2) Efficiency Model number 265 mA 680 µF 78% JWE0624S3V3 305 mA 680 µF 82% JWE0624S05 295 mA 330 µF 86% JWE0624S12 295 mA 330 µF 86% JWE0624S15 250 mA 290 mA 150 µF 87% JWE0624S24 ±12.0 V ±250 mA 295 mA ±50 µF 86% JWE0624D12 ±15.0 V ±200 mA 290 mA ±150 µF 87% JWE0624D15 3.3 V 1500 mA 130 mA 680 µF 78% JWE0648S3V3 5.0 V 1200 mA 155 mA 680 µF 82% JWE0648S05 12.0 V 500 mA 145 mA 330 µF 86% JWE0648S12 15.0 V 400 mA 145 mA 330 µF 86% JWE0648S15 24.0 V 250 mA 145 mA 150 µF 87% JWE0648S24 ±12.0 V ±250 mA 145 mA ±150 µF 87% JWE0648D12 ±15.0 V ±200 mA 145 mA ±150 µF 87% JWE0648D15 No load 8 mA 6 mA Full load Notes 1. Input currents measured at nominal input voltage. 2. Maximum capacitive load is per output. Mechanical Details Bottom View 16 10 Pin Connections 0.31 (8.0) 8 0.54 (13.7) 7 0.40 (10.16) 1 0.15 (3.8) 9 0.60 (15.24) 0.94 (23.8) 1 0.10 (2.54) 1.77 [0.07] ø0.02 (0.5) 0.12 (3.0) www.xppower.com Pin 1 7 8 9 10 16 Single -Vin No Connection No Connection +Vout -Vout +Vin Dual -Vin No Connection Common +Vout -Vout +Vin JWE06 Series DC-DC Converter Input Characteristic Input Voltage Range Input Filter Undervoltage Lockout Minimum Typical Notes & Conditions Maximum Units 9.0 36 VDC 24 V nominal 18.0 75 VDC 48 V nominal Internal Pi type ON at ≥9 V, OFF at <8 V 24 V models ON at ≥18 V, OFF at <16 V 48 V models 12 V models 25 Input Surge VDC for 1 s 50 24 V models 48 V models 100 Output Characteristic Minimum Output Voltage 3.3 Typical Initial Set Accuracy Output Voltage Balance ±1.0 Maximum Units Notes & Conditions 30 VDC See Models and Ratings table ±2.0 % ±2.0 % For dual output with balanced laods A No minimum load required From minimum to maximum input at full load Minimum Load At full load Line Regulation ±0.2 ±0.8 % Load Regulation ±0.5 ±1.0 % From 0 to full load ±5.0 % On dual output models when one load is varied between 25% and 100% and other is fixed at 100% 5 % deviation Ripple & Noise 55 mV pk-pk Overload Protection 150 % Cross Regulation Transient Response 3 Short Circuit Protection Recovery within 1% in less than 250 µs for a 25% load change. 20 MHz bandwidth. Measured using 0.47 µF ceramic capacitor. Continuous Trip & Restart (Hiccup mode), with auto recovery Maximum Capacitive Load See Models and Ratings table Temperature Coefficient 0.02 %/ ˚C Maximum Units General Characteristic Minimum Typical Efficiency Isolation: Input to Output Isolation Resistance 88 % 1500/1800 500 Switching Frequency 370 Power Density See Models and Ratings table VDC 60 s/1 s pF kHz At 500 VDC Ω 109 Isolation Capacitance W/in3 38.0 Mean Time Between Failure MHrs Weight Notes & Conditions 0.013 (6.1) MIL-HDBK-217F, +25 °C GB lb (g) Environmental Characteristic Minimum Operating Temperature -40 Storage Temperature -50 Typical Case Temperature Humidity Maximum Units Notes & Conditions +105 °C See Derating Curve. +125 °C +105 °C 95 %RH Cooling Case Flammability Non-condensing Natural convection UL 94V-0 Rated EMC: Emissions Phenomenon Standard Test Level Conducted EN55032 Class A www.xppower.com Notes & Conditions No filter required 2 JWE06 Series DC-DC Converter EMC: Immunity Test Level Criteria ESD EN61000-4-2 ±8 kV air discharge, ±6 kV contact A Radiated EN61000-4-3 10 V/m A EFT/Burst EN61000-4-4 ±2 kV A With external capacitor, suggested part is CHEMI-CON KY 330µF/100V Surge EN61000-4-5 ±1 kV A With external capacitor, suggested part is CHEMI-CON KY 330µF/100V Conducted EN61000-4-6 10 V rms A Magnetic Fields EN61000-4-8 100 A/m A Phenomenon Standard Notes & Conditions Safety Approvals Safety Agency Safety Standard CB Report IEC60950-1 Notes & Conditions Information Technology UL UL/cUL60950-1 Information Technology Mechanical Details 8 Bottom View 16 10 0.54 (13.7) 7 0.40 (10.16) 1 0.31 (8.0) Pin Connections 0.15 (3.8) 9 ø0.02 (0.5) 0.60 (15.24) 0.94 (23.8) 1.77 [0.07] 0.12 (3.0) 0.10 (2.54) Pin 1 7 8 9 10 16 Single -Vin No Connection No Connection +Vout -Vout +Vin Dual -Vin No Connection Common +Vout -Vout +Vin Notes 1. All dimensions are in inches (mm) 2. Weight: 0.013 lbs (6.1 g) approx. 3. Tolerance: X.XX±0.01 (X.X±0.25) X.XXX±0.005 (X.XX±0.13) 4. Pin Tolerance: ±0.002 (±0.05) Application Notes Derating Curve Output Power (%) 100 0 -40 75 105 Ambient Temperature (°C) 3 www.xppower.com 16 Feb 17