Winchester BD45000 Modular plug Datasheet

Modular Plugs
A complete variety of UL Recognized modular plugs are available. All plugs have 15 micro inches* of gold plating on the contacts which meet all
standard applications for voice and data. Flat satin stranded, round stranded, and round solid cables are accommodated. Keyed, MMJ, DEC types,
shielded and category 5 versions are available. Flat modular cable types accept 24-28 AWG, stranded. Round cable types accept 24-26 AWG,
stranded or solid.
Part
No.
300062
300064
300066
300068
300164
300166
300168
300168K
300160
300264
300266
300268
300066D
300068K
300068S
300568
300566EZ
300568EZ
300568L
300568S
300668EZ
Description
Ty
4P4C Handset Plug For Flat Satin, Stranded
6P4C Plug For Flat Satin, Stranded
6P6C Plug For Flat Satin, Stranded
8P8C Plug For Flat Satin, Stranded
6P4C Plug For Round Twisted Pair, Solid
6P6C Plug For Round Twisted Pair, Solid
8P8C Plug For Round Twisted Pair, Solid
8P8C Keyed Plug For Round Twisted Pair, Solid
DISCONTINUED
6P4C Plug For Round Twisted Pair, Stranded
6P6C Plug For Round Twisted Pair, Stranded
8P8C Plug For Round Twisted Pair, Stranded
6P6C DEC Offset Plug For Flat Satin
8P8C Keyed Plug For Round Twisted Pair, Stranded
8P8C Shielded Plug For Round Twisted Pair, Solid DISCONTINUED
8P8C Category 5 Plug For Round Twisted Pair, Solid
6P6C EZ-RJ12 Plug (see below)
8P8C EZ-RJ45 Category 5 Plug (see below)
8P8C Category 5 Liner Plug For Round Twisted Pair, Solid
8P8C Shielded Category 5 Liner Plug For Round, Solid
8P8C EZ-RJ45 Category 6 Plug
—
RJ11
RJ12
RJ45
RJ11
RJ12
RJ45
RJ45
RJ50
RJ11
RJ12
RJ45
MMJ
RJ45
RJ45
RJ45
RJ12
RJ45
RJ45
RJ45
RJ45
Category 6 Boot with Strain Relief
RJ45
Boot
NEW (see below)
8P8C EZ-RJ45 Shielded Category 6 Plug NEW (see below)
300668SEZ
CXB300EZ
s
s
s
s
EZ RJ45 Modular Plugs
The new patented EZ-RJ45™ connector simplifies installation by allowing the pairs to be inserted through the connector. There is no difficult to
handle liner or wire bar to deal with. Inspection of the correct conductor order is done before crimping so no connector is wasted because if incorrect
wiring. The conductors are able to be pulled forward so the pairs are very close to the contacts. This method allows the integrity of the pairs to
maintain Category Five, and even enhanced Category 5 and Category 6 capabilities. (50 u in. gold)
The EZ-RJ12™ and both EZ-RJ45™ can be crimped with most any standard tool, then trimmed with a cutter or small utility knife. However, the
new BD45000 crimp tool crimps and trims the exposed conductors in one operation. The vertical action of the tool makes a uniform and positive
crimp.
PartNo.
Description
300566EZ
300568EZ
300668EZ
300668SEZ
BD45000
BD45000BL
CXB300EZ
CXB500EZ
CXB600EZ
6P6C EZ-RJ12 Plug
8P8C EZ-RJ45 Category 5 Plug (solid or stranded)
RJ12
RJ45
RJ45
NEW (solid or stranded)
8P8C EZ-RJ45 Shielded Category 6 Plug NEW (solid or stranded) RJ45
8P8C EZ-RJ45 Category 6 Plug
-
Crimp and Trim Tool for EZ RJ12, EZ RJ45 Cat 5 & 6
Replacement Blades ( 2 per Pkg ) for BD45000 Tool
Cable Boot with Strain Relief ( Required for Cat 6 )
-
Cable Boot SNAGLESS Cat 5 (color: clear) NEW
-------------
Cable Boot SNAGLESS Cat 6 (color: clear) NEW
----
BD45000 Crimp & Trim Tool
Video Demo
EZ-RJ45 Cat 6
Shielded with
SNAGLESS Boot
CXB500/600
Snagless Boot
Back to Index
FOR TECHNICAL SUPPORT: PHONE 973-347-4040 / FAX973-347-2111
Category Five Liner Plugs
Category 5 Liner Plugs are supplied with an insertable liner for the conductors. This is also known as a “Wire Bar” style. The separated conductors are
inserted into the liner, cut off squarely at bottom, inserted into the RJ45 plug, then perfectly crimped. (Use CBX300 series boots for a proper Category
5 assembly.
Part
No.
300568L
8P8C Category 5 Liner Plug For Round Twisted Pair, Solid
RJ45
300568S
8P8C Shielded Category 5 Liner Plug For Round, Solid
RJ45
Description
Wall Jacks
Plastic wall jacks are furnished with mounting hardware for easy installation. The Non-UL types are very economical and are to be used where UL is
not required. 15 micro inches of gold plate on the contacts is standard on all jacks. Rounded configuration, rear wiring terminals allow these wall plates
to fit all standard receptacle boxes.
Part
Number
300004IV
300004WH
300006IV
300008IV
300014IV
300014WH
300016IV
300018IV
300090
300094IV
300094WH
300095
300104
301004WH
301006WH
301008WH
301014WH
301016WH
301018WH
301094WH
Description
4C Ivory Flush Mount Single Jack, Non-UL
4C White Flush Mount Single Jack, Non-UL
6C Ivory Flush Mount Single Jack, Non-UL
8C Ivory Flush Mount Single Jack, Non-UL
4C Ivory Flush Mount Dual Jack, Non-UL
4C White Flush Mount Dual Jack, Non-UL
6C Ivory Flush Mount Dual Jack, Non-UL
8C Ivory Flush Mount Dual Jack, Non-UL
4C Ivory Wall-Phone, 3 Jacks, Non-UL
4C Ivory Wall-Phone Jack, Non-UL
4C White Wall-Phone Jack, Non-UL
4C Steel Wall-Phone Jack, Non-UL
4C Ivory Telephone/TV Jack, Non-UL
4C Ivory Flush Mount Single Jack, UL
6C Ivory Flush Mount Single Jack, UL
8C Ivory Flush Mount Single Jack, UL
4C White Flush Mount Dual Jack, UL
6C White Flush Mount Dual Jack, UL
8C White Flush Mount Dual Jack, UL
4C White Wall-Phone Jack, UL
FOR TECHNICAL SUPPORT: PHONE 973-347-4040 / FAX973-347-2111
Back to Index
21
Hit Counter
Similar pages