BZD27-M Series www.vishay.com Vishay Semiconductors Zener Diodes with Surge Current Specification FEATURES • Sillicon planar Zener diodes Available • Low profile surface-mount package • Zener and surge current specification • Low leakage current • Excellent stability • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C 17249 • Meets JESD 201 class 2 whisker test • ESD capability according to AEC-Q101: human body model: > 8 kV machine model: > 800 V PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT VZ range nom. 3.6 to 200 V Test current IZT 5 to 100 mA VBR 7 to 188 V VWM 6.2 to 160 V PPPM 150 W TJ max. 175 °C VZ specification Pulse current Int. construction Single Polarity • Wave and reflow solderable • AEC-Q101 qualified • Base P/N-M3 - halogen-free, RoHS-compliant, and commercial grade • Base P/N-HM3 - halogen-free, RoHS-compliant, and automotive grade (available on request) • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Uni-directional ORDERING INFORMATION DEVICE NAME BZD27-M Series ORDERING CODE TAPED UNITS PER REEL BZD27C3V6P-M3-08 to BZD27C200P-M3-08 3000 per 7" reel (8mm tape) MINIMUM ORDER QUANTITY 30 000/box BZD27C3V6P-M3-18 to BZD27C200P-M3-18 10 000 per 13" reel (8 mm tape) 50 000/box PACKAGE PACKAGE NAME DO-219AB (SMF) WEIGHT MOLDING COMPOUND FLAMMABILITY RATING MOISTURE SENSITIVITY LEVEL WHISKER TEST ACC. JESD 201 SOLDERING CONDITIONS 15 mg UL 94 V-0 MSL level 1 (according J-STD-020) Class 2 Peak temperature max. 260 °C ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER Power dissipation Non repetitive peak surge power dissipation (2) TEST CONDITION SYMBOL VALUE TL = 105 °C Ptot 2300 mW TA = 30 °C (1) Ptot 800 mW 100 μs square pulse PZSM 300 W 10/1000 μs waveform PRSM 150 W RthJL 30 K/W RthJA 180 K/W Junction to lead Junction to ambient air Mounted on epoxy-glass PCB with 3 mm x 3 mm Cu pads ( 40 μm thick) Junction temperature UNIT Tj 175 °C Storage temperature range Tstg -65 to +175 °C Operating temperature range Top -65 to +175 °C Notes (1) Mounted on epoxy-glass PCB with 3 mm x 3 mm Cu pads ( 40 μm thick) (2) T = 25 °C prior to surge J Rev. 1.6.,18-Mar-15 Document Number: 85155 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BZD27-M Series www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PART NUMBER ZENER VOLTAGE RANGE (1) TEST CURRENT VZ at IZT1 IZT1 V mA MARKING CODE MIN. NOM. MAX. REVERSE CURRENT DYNAMIC RESISTANCE TEMPERATURE COEFFICIENT IR at VR ZZ at IZT1 VZ at IZT1 μA V MAX. %/°C TYP. MAX. MIN. MAX. BZD27C3V6P-M N0 3.4 3.6 3.8 100 100 1 4 8 -0.14 -0.04 BZD27C3V9P-M N1 3.7 3.9 4.1 100 50 1 4 8 -0.14 -0.04 BZD27C4V3P-M N2 4 4.3 4.6 100 25 1 4 7 -0.12 -0.02 BZD27C4V7P-M N3 4.4 4.7 5 100 10 1 3 7 -0.1 0 BZD27C5V1P-M N4 4.8 5.1 5.4 100 5 1 3 6 -0.08 0.02 BZD27C5V6P-M N5 5.2 5.6 6 100 10 2 2 4 -0.04 0.04 BZD27C6V2P-M N6 5.8 6.2 6.6 100 5 2 2 3 -0.01 0.06 BZD27C6V8P-M N7 6.4 6.8 7.2 100 10 3 1 3 0 0.07 BZD27C7V5P-M N8 7 7.5 7.9 100 50 3 1 2 0 0.07 BZD27C8V2P-M N9 7.7 8.2 8.7 100 10 3 1 2 0.03 0.08 BZD27C9V1P-M O0 8.5 9.1 9.6 50 10 5 2 4 0.03 0.08 BZD27C10P-M O1 9.4 10 10.6 50 7 7.5 2 4 0.05 0.09 BZD27C11P-M O2 10.4 11 11.6 50 4 8.2 4 7 0.05 0.1 BZD27C12P-M O3 11.4 12 12.7 50 3 9.1 4 7 0.05 0.1 BZD27C13P-M O4 12.4 13 14.1 50 2 10 5 10 0.05 0.1 BZD27C15P-M O5 13.8 15 15.6 50 1 11 5 10 0.05 0.1 BZD27C16P-M O6 15.3 16 17.1 25 1 12 6 15 0.06 0.11 BZD27C18P-M O7 16.8 18 19.1 25 1 13 6 15 0.06 0.11 BZD27C20P-M O8 18.8 20 21.2 25 1 15 6 15 0.06 0.11 BZD27C22P-M O9 20.8 22 23.3 25 1 16 6 15 0.06 0.11 BZD27C24P-M P0 22.8 24 25.6 25 1 18 7 15 0.06 0.11 BZD27C27P-M P1 25.1 27 28.9 25 1 20 7 15 0.06 0.11 BZD27C30P-M P2 28 30 32 25 1 22 8 15 0.06 0.11 BZD27C33P-M P3 31 33 35 25 1 24 8 15 0.06 0.11 BZD27C36P-M P4 34 36 38 10 1 27 21 40 0.06 0.11 BZD27C39P-M P5 37 39 41 10 1 30 21 40 0.06 0.11 BZD27C43P-M P6 40 43 46 10 1 33 24 45 0.07 0.12 BZD27C47P-M P7 44 47 50 10 1 36 24 45 0.07 0.12 BZD27C51P-M P8 48 51 54 10 1 39 25 60 0.07 0.12 BZD27C56P-M P9 52 56 60 10 1 43 25 60 0.07 0.12 BZD27C62P-M Q0 58 62 66 10 1 47 25 80 0.08 0.13 BZD27C68P-M Q1 64 68 72 10 1 51 25 80 0.08 0.13 BZD27C75P-M Q2 70 75 79 10 1 56 30 100 0.08 0.13 BZD27C82P-M Q3 77 82 87 10 1 62 30 100 0.08 0.13 BZD27C91P-M Q4 85 91 96 5 1 68 60 200 0.08 0.13 BZD27C100P-M Q5 94 100 106 5 1 75 60 200 0.09 0.13 BZD27C110P-M Q6 104 110 116 5 1 82 80 250 0.09 0.13 BZD27C120P-M Q7 114 120 127 5 1 91 80 250 0.09 0.13 BZD27C130P-M Q8 124 130 141 5 1 100 110 300 0.09 0.13 BZD27C150P-M Q9 138 150 156 5 1 110 130 300 0.09 0.13 BZD27C160P-M R0 153 160 171 5 1 120 150 350 0.09 0.13 BZD27C180P-M R1 168 180 191 5 1 130 180 400 0.09 0.13 BZD27C200P-M R2 188 200 212 5 1 150 200 500 0.09 0.13 Notes • Electrical characteristics when used as regulator diodes • Maximum VF = 1.2 V, at IF = 0.2 A (1) Pulse test: t 5 ms p Rev. 1.6.,18-Mar-15 Document Number: 85155 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BZD27-M Series www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PART NUMBER ZENER VOLTAGE RANGE TEST CURRENT REVERSE CURRENT CLAMPING VOLTAGE TEMPERATURE COEFFICIENT VZ at IZT1 IZT1 IR at VR VC at IRSM (1) VZ at IZT1 V mA MARKING CODE MIN. NOM. MAX. μA V MAX. V A MAX. %/C MIN. MAX. 0.07 BZD27C7V5P-M N8 7 7.5 7.9 100 1500 6.2 11.3 13.3 0 BZD27C8V2P-M N9 7.7 8.2 8.7 100 1200 6.8 12.3 12.2 0.03 0.08 BZD27C9V1P-M O0 8.5 9.1 9.6 50 100 7.5 13.3 11.3 0.03 0.08 BZD27C10P-M O1 9.4 10 10.6 50 20 8.2 14.8 10.1 0.05 0.09 BZD27C11P-M O2 10.4 11 11.6 50 5 9.1 15.7 9.6 0.05 0.1 BZD27C12P-M O3 11.4 12 12.7 50 5 10 17 8.8 0.05 0.1 BZD27C13P-M O4 12.4 13 14.1 50 5 11 18.9 7.9 0.05 0.1 BZD27C15P-M O5 13.8 15 15.6 50 5 12 20.9 7.2 0.05 0.1 BZD27C16P-M O6 15.3 16 17.1 25 5 13 22.9 6.6 0.06 0.11 BZD27C18P-M O7 16.8 18 19.1 25 5 15 25.6 5.9 0.06 0.11 BZD27C20P-M O8 18.8 20 21.2 25 5 16 28.4 5.3 0.06 0.11 BZD27C22P-M O9 20.8 22 23.3 25 5 18 31 4.8 0.06 0.11 BZD27C24P-M P0 22.8 24 25.6 25 5 20 33.8 4.4 0.06 0.11 BZD27C27P-M P1 25.1 27 28.9 25 5 22 38.1 3.9 0.06 0.11 BZD27C30P-M P2 28 30 32 25 5 24 42.2 3.6 0.06 0.11 BZD27C33P-M P3 31 33 35 25 5 27 46.2 3.2 0.06 0.11 BZD27C36P-M P4 34 36 38 10 5 30 50.1 3 0.06 0.11 BZD27C39P-M P5 37 39 41 10 5 33 54.1 2.8 0.06 0.11 BZD27C43P-M P6 40 43 46 10 5 36 60.7 2.5 0.07 0.12 BZD27C47P-M P7 44 47 50 10 5 39 65.5 2.3 0.07 0.12 BZD27C51P-M P8 48 51 54 10 5 43 70.8 2.1 0.07 0.12 BZD27C56P-M P9 52 56 60 10 5 47 78.6 1.9 0.07 0.12 BZD27C62P-M Q0 58 62 66 10 5 51 86.5 1.7 0.08 0.13 BZD27C68P-M Q1 64 68 72 10 5 56 94.4 1.6 0.08 0.13 BZD27C75P-M Q2 70 75 79 10 5 62 103.5 1.5 0.08 0.13 BZD27C82P-M Q3 77 82 87 10 5 68 114 1.3 0.08 0.13 BZD27C91P-M Q4 85 91 96 5 5 75 126 1.2 0.09 0.13 BZD27C100P-M Q5 94 100 106 5 5 82 139 1.1 0.09 0.13 BZD27C110P-M Q6 104 110 116 5 5 91 150 1 0.09 0.13 BZD27C120P-M Q7 114 120 127 5 5 100 167 0.9 0.09 0.13 BZD27C130P-M Q8 124 130 141 5 5 110 185 0.81 0.09 0.13 BZD27C150P-M Q9 138 150 156 5 5 120 205 0.73 0.09 0.13 BZD27C160P-M R0 153 160 171 5 5 130 224 0.67 0.09 0.13 BZD27C180P-M R1 168 180 191 5 5 150 252 0.6 0.09 0.13 BZD27C200P-M R2 188 200 212 5 5 160 278 0.54 0.09 0.13 Notes • Electrical characteristics when used as protection diodes (1) Non-repetitive peak reverse current in accordance with ”IEC 60-1, section 8” (10/1000 μs pulse); see fig. 4 Rev. 1.6.,18-Mar-15 Document Number: 85155 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BZD27-M Series www.vishay.com Vishay Semiconductors TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 10 IF - Forward Current (A) IRSM (%) Max. VF t1 = 10 µs t2 = 1000 µs 100 Typ. VF 90 1 50 10 0.1 0.6 0.8 17411 1.0 1.2 1.4 17415 VF - Forward Voltage (V) Fig. 1 - Forward Current vs. Forward Voltage t t1 1.6 t2 Fig. 4 - Non-Repetitive Peak Reverse Current Pulse Definition CD - Typ. Junction Capacitance (pF) 10 000 C5V1P C6V8P C18P C12P 1000 100 C27P C51P C200P 10 0 0.5 17412 1.0 1.5 2.0 2.5 3.0 VR - Reverse Voltage (V) Fig. 2 - Typ. Diode Capacitance vs. Reverse Voltage Ptot - Total Power Dissipation (W) 3.0 RthJL = 30K/W 2.5 2.0 1.5 RthJA = 180K/W 1.0 0.5 0 22774 0 25 50 75 100 125 150 175 Tamb - Ambient Temperature (°C) Fig. 3 - Power Dissipation vs. Ambient Temperature Rev. 1.6.,18-Mar-15 Document Number: 85155 4 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BZD27-M Series www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters (inches): DO219-AB (SMF) 0.85 (0.033) 0 (0.000) 0.1 (0.004) 5 5 0.1(0.003) 1.7 (0.067) Detail Z enlarged 1.2 (0.047) 0.8 (0.031) 0.25 (0.010) 1.9 (0.075) 0.35 (0.014) 1.08 (0.043) 2.9 (0.114) 0.88 (0.035) 2.7 (0.106) 3.9 (0.154) 3.5 (0.138) Foot print recommendation: Created - Date: 15. February 2005 Rev. 3 - Date: 13. March 2007 Document no.:S8-V-3915.01-001 (4) 1.3 (0.051) 1.4 (0.055) 1.3 (0.051) 2.9 (0.114) 17247 Rev. 1.6.,18-Mar-15 Document Number: 85155 5 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BZD27-M Series www.vishay.com Vishay Semiconductors BLISTERTAPE DIMENSIONS FOR SMF in millimeters PS Document-No.: S8-V-3717.02-001 (3) 18513 Rev. 1.6.,18-Mar-15 Document Number: 85155 6 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000