A420616 Series Preliminary 1M X 16 CMOS DYNAMIC RAM WITH EDO PAGE MODE Document Title 1M X 16 CMOS DYNAMIC RAM WITH EDO PAGE MODE Revision History History Issue Date Remark 0.0 Initial issue June 23, 1999 Preliminary 0.1 Modify AC, DC data February 7, 2002 0.2 Modify DC data and all parts guarantee self-refresh mode June 10, 2002 Rev. No. PRELIMINARY (June, 2002, Version 0.2) AMIC Technology, Inc. A420616 Series Preliminary 1M X 16 CMOS DYNAMIC RAM WITH EDO PAGE MODE Features n Organization: 1,048,576 words X 16 bits n Part Identification - A420616 (1K Ref.) n Single 5.0V power supply/built-in VBB generator n Low power consumption - Operating: 120mA (-45 max) - Standby: 1.0mA (TTL), 1.0mA (CMOS) 1.5mA (Self-refresh current) n High speed - 45/50 ns RAS access time - 20/22 ns column address access time - 12/13 ns CAS access time - 18/20 ns EDO Page Mode Cycle Time n Industrial operating temperature range: -40°C to 85°C for -U n Fast Page Mode with Extended Data Out n Separate CAS ( UCAS , LCAS ) for byte selection n 1K Refresh Cycle in 16ms n Read-modify-write, RAS -only, CAS -before- RAS , Hidden refresh capability n TTL-compatible, three-state I/O n JEDEC standard packages - 400mil, 42-pin SOJ - 400mil, 44/50 TSOP type II package This allow random access of up to 1024 words within a row at a 56/50 MHz EDO cycle, making the A420616 ideally suited for graphics, digital signal processing and high performance computing systems. General Description The A420616 is a new generation randomly accessed memory for graphics, organized in a 1,048,576-word by 16-bit configuration. This product can execute Byte Write and Byte Read operation via two CAS pins. The A420616 offers an accelerated Fast Page Mode Pin Descriptions Pin Configuration Symbol nSOJ 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 VSS I/O15 I/O14 I/O13 I/O12 VSS I/O11 I/O10 I/O9 I/O8 NC LCAS UCAS OE A9 A8 A7 A6 24 23 22 A5 A4 VSS VCC I/O0 I/O1 I/O2 I/O3 VCC I/O4 I/O5 I/O6 I/O7 NC 1 2 3 4 5 6 7 8 9 10 11 NC NC WE RAS NC NC A0 A1 A2 A3 12 13 14 15 16 17 18 19 20 21 VCC 22 A420616V 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 A420616S VCC I/O0 I/O1 I/O2 I/O3 VCC I/O4 I/O5 I/O6 I/O7 NC NC WE RAS NC NC A0 A1 A2 A3 VCC n TSOP 44 43 42 41 40 39 38 37 36 35 34 VSS I/O15 I/O14 I/O13 I/O12 VSS I/O11 I/O10 I/O9 I/O8 NC 33 32 31 30 29 28 27 26 25 24 NC LCAS UCAS OE A9 A8 A7 A6 A5 A4 23 VSS Description A0 – A9 Address Inputs I/O0 - I/O15 Data Input/Output RAS Row Address Strobe LCAS Column Address Strobe for Lower Byte (I/O0 – I/O7) UCAS Column Address Strobe for Upper Byte (I/O8 – I/O15) WE Write Enable OE Output Enable VCC 5.0V Power Supply VSS Ground NC No Connection cycle with a feature called Extended Data Out (EDO). PRELIMINARY (June, 2002, Version 0.2) 1 AMIC Technology, Inc. A420616 Series Selection Guide Symbol Description -45 -50 Unit tRAC Maximum RAS Access Time 45 50 ns tAA Maximum Column Address Access Time 20 22 ns tCAC Maximum CAS Access Time 12 13 ns tOEA Maximum Output Enable ( OE ) Access Time 12 13 ns tRC Minimum Read or Write Cycle Time 76 84 ns tPC Minimum EDO Cycle Time 18 20 ns Functional Description The A420616 reads and writes data by multiplexing an 20bit address into a 10-bit row and 10-bit column address. RAS and CAS are used to strobe the row address and the column address, respectively. The A420616 offers an accelerated Fast Page Mode cycle through a feature called Extended Data Out, which keeps the output drivers on during the CAS precharge time (tcp). Since data can be output after CAS goes high, the user is not required to wait for valid data to appear before starting the next access cycle. Data-out will remain valid as long as RAS and OE are low, and WE is high; this is the only characteristic which differentiates Extended Data Out operation from a standard Read or Fast Page Read. The A420616 has two CAS inputs: LCAS controls I/O0I/O7, and UCAS controls I/O8 - I/O15, UCAS and LCAS function in an identical manner to CAS in that either will generate an internal CAS signal. The CAS function and timing are determined by the first CAS ( UCAS or LCAS ) to transition low and by the last to transition high. A memory cycle is terminated by returning both RAS and CAS high. Memory cell data will retain its correct state by maintaining power and accessing all 1024(1K) combinations of the 10-bit row addresses, regardless of sequence, at least once every 16ms through any RAS cycle (Read, Write) or RAS Refresh cycle ( RAS -only, CBR, or Hidden). The CBR Refresh cycle automatically controls the row addresses by invoking the refresh counter and controller. Byte Read and Byte Write are controlled by using LCAS and UCAS separately. A Read cycle is performed by holding the WE signal high during RAS / CAS operation. A Write cycle is executed by holding the WE signal low during RAS / CAS operation; the input data is latched by the falling edge of WE or CAS , whichever occurs later. The data inputs and outputs are routed through 16 common I/O pins, with RAS , CAS , Power-On The initial application of the VCC supply requires a 200 µs wait followed by a minimum of any eight initialization cycles containing a RAS clock. During Power-On, the VCC current is dependent on the input levels of RAS and CAS . WE and OE controlling the in direction. EDO Page Mode operation all 1024(1K) columns within a selected row to be randomly accessed at a high data rate. A EDO Page Mode cycle is initiated with a row address latched by RAS followed by a column address latched by CAS . While holding RAS low, CAS can be toggled to strobe changing column addresses, thus achieving shorter cycle times. PRELIMINARY (June, 2002, Version 0.2) It is recommended that RAS and CAS track with VCC or be held at a valid VIH during Power-On to avoid current surges. 2 AMIC Technology, Inc. A420616 Series Block Diagram Vcc RAS UCAS LCAS WE Control Clocks Refresh Timer Vss VBB Generator Lower Data in Buffer Row Decoder Refresh Counter A0~A9 A0~A9 Memory Array 1,048,576 x 16 Cells OE Upper Data in Buffer I/O8 to I/O15 Row Address Buffer Col. Address Buffer Recommended Operating Conditions Symbol Lower Data out Buffer Sense Amps & I/O Refresh control I/O0 to I/O7 Description Upper Data out Buffer Column Decoder (Ta = 0°C to +70°C or -40°C to +85°C) Min. Typ. Max. Unit Notes VCC Power Supply 4.5 5.0 5.5 V 1 VSS Input High Voltage 0.0 0.0 0.0 V 1 VIH Input High Voltage 2.4 - VCC + 1.0 V 1 VIL Input Low Voltage -0.5 - 0.8 V 1 PRELIMINARY (June, 2002, Version 0.2) 3 AMIC Technology, Inc. A420616 Series Truth Table Function RAS UCAS LCAS Standby H H Read: Word L L Read: Lower Byte L Read: Upper Byte L Write: Word Write: Lower Byte Address I/Os Notes WE OE H X X X High-Z L H L Row/Col. Data Out H L H L Row/Col. I/O0-7 = Data Out I/O8-15 = High-Z L H H L Row/Col. I/O0-7 = High-Z I/O8-15 = Data Out L L L L H Row/Col. Data In L H L L H Row/Col. I/O0-7 = Data In I/O8-15 = X Write: Upper Byte L L H L H Row/Col. I/O0-7 = X I/O8-15 = Data In Read-Write L L L H→L L→H Row/Col. Data Out → Data In 1,2 EDO-Page-Mode Read: Hi-Z -First cycle -Subsequent Cycles L L H→L H→L H→L H→L H→L H H H→L Row/Col. Col. Data Out Data Out 2 2 EDO-Page-Mode Write -First cycle -Subsequent Cycles L L H→L H→L H→L H→L L L H H Row/Col. Col. Data In Data In 1 1 EDO-Page-Mode Read-Write -First cycle -Subsequent Cycles L L H→L H→L H→L L→H Data Out → Data In H→L H→L H→L L→H Row/Col. Col. Data Out → Data In 1, 2 1, 2 Hidden Refresh Read L→H→L L L H L Row/Col. Data Out 2 Hidden Refresh Write L→H→L L L L X Row/Col. Data In → High-Z 1 L H H X X Row High-Z CBR Refresh H→L L L X X X High-Z Self Refresh H→L L L H X X High-Z RAS -Only Refresh Note: 3 1. Byte Write may be executed with either UCAS or LCAS active. 2. Byte Read may be executed with either UCAS or LCAS active. 3. Only one CAS signal ( UCAS or LCAS ) must be active. PRELIMINARY (June, 2002, Version 0.2) 4 AMIC Technology, Inc. A420616 Series Absolute Maximum Ratings* *Comments Input Voltage (Vin) . . . . . . . . . . . . . . . . . . . . –1.0V to +7.0V Output Voltage (Vout) . . . . . . . . . . . . . . . . . –1.0V to +7.0V Power Supply Voltage (VCC) . . . . . . . . . . –1.0V to +7.0V Operating Temperature (TOPR) . . . . . . . . . 0°C to +70°C Storage Temperature (TSTG) . . . . . . . . -55°C to +150°C Soldering Temperature X Time (TSOLDER) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C X 10sec Power Dissipation (PD) . . . . . . . . . . . . . . . . . . . . . . . . . 1W Short Circuit Output Current (Iout) . . . . . . . . . . . . . 50mA Latch-up Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200mA Stresses above those listed under "Absolute Maximum Ratings" may cause permanent damage to this device. These are stress ratings only. Functional operation of this device at these or any other conditions above those indicated in the operational sections of these specification is not implied or intended. Exposure to the absolute maximum rating conditions for extended periods may affect device reliability. DC Electrical Characteristics (VCC = 5.0V ± 10%, VSS = 0V, Ta = 0°C to +70°C or -40°C to +85°C) -45 Symbol -50 Parameter Unit Min. Max. Min. Max. Test Conditions IIL Input Leakage Current -5 +5 -5 +5 µA 0V ≤ Vin ≤ VCC Pins not under Test = 0V IOL Output Leakage Current -5 +5 -5 +5 µA DOUT disabled, 0V ≤ Vout ≤ VCC ICC1 Operating Power Supply Current - 120 - 115 mA RAS , UCAS , LCAS and Address cycling; tRC = min. ICC2 TTL Supply Current Supply Current - 1.0 - 1.0 mA RAS = UCAS = LCAS = VIH ICC3 Average Power Supply Current, RAS Refresh Mode - 120 - 115 mA RAS and Address cycling, UCAS = LCAS = VIH, tRC = min. ICC4 EDO Page Mode Average Power Supply Current - 120 - 115 mA RAS and address = VIL, UCAS , LCAS and Address cycling; tPC = min. ICC5 CAS -before- RAS Refresh Power Supply Current - 120 - 115 mA RAS and UCAS or LCAS cycling; tRC = min. ICC6 CMOS Standby Power Supply Current - 1.0 - 1.0 mA RAS = UCAS = LCAS = VCC - 0.2V ICC7 Self Refresh Mode Current - 1.5 - 1.5 mA RAS = CAS ≤VSS+0.2V All other input high levels are VCC-0.2V or input low levels are VSS +0.2V VOH Output Voltage 2.4 - 2.4 - V IOUT = -5.0mA - 0.4 - 0.4 V IOUT = 4.2mA VOL PRELIMINARY (June, 2002, Version 0.2) 5 Notes 1, 2 1 1, 2 1 AMIC Technology, Inc. A420616 Series AC Characteristics (VCC = 5.0V ± 10%, VSS = 0V, Ta = 0°C to +70°C or -40°C to +85°C) Test Conditions: Input timing reference level: VIH/VIL=2.4V/0.8V Output reference level: VOH/VOL=2.0V/0.8V Output Load: 2TTL gate + CL (50pF) Assumed tT=2ns # Std Symbol -45 -50 Parameter Min. Max. Min. Max. Unit Notes 4, 5 tT Transition Time (Rise and Fall) 1 50 1 50 ns 1 tRC Random Read or Write Cycle Time 76 - 84 - ns 2 tRP RAS Precharge Time 27 - 30 - ns 3 tRAS RAS Pulse Width 45 10K 50 10K ns 4 tCAS CAS Pulse Width 7 10K 8 10K ns 5 tRCD RAS to CAS Delay Time 10 33 11 37 ns 6 6 tRAD RAS to Column Address Delay Time 8 25 9 28 ns 7 7 tRSH CAS to RAS Hold Time 7 - 8 - ns 8 tCSH CAS Hold Time 35 - 37 - ns 9 tCRP CAS to RAS Precharge Time 5 - 5 - ns 10 tASR Row Address Setup Time 0 - 0 - ns 11 tRAH Row Address Hold Time 7 - 8 - ns 12 tCLZ CAS to Output in Low Z 3 - 3 - ns 8 13 tRAC Access Time from RAS - 45 - 50 ns 6,7 14 tCAC Access Time from CAS - 12 - 13 ns 6, 13 15 tAA Access Time from Column Address - 20 - 22 ns 7, 13 16 tOEA OE Access Time - 12 - 13 ns 17 tAR Column Address Hold Time from RAS 40 - 45 - ns 18 tRCS Read Command Setup Time 0 - 0 - ns 19 tRCH Read Command Hold Time 0 - 0 - ns PRELIMINARY (June, 2002, Version 0.2) 6 9 AMIC Technology, Inc. A420616 Series AC Characteristics (continued) (VCC = 5.0V ± 10%, VSS = 0V, Ta = 0°C to +70°C or -40°C to +85°C) Test Conditions: Input timing reference level: VIH/VIL=2.4V/0.8V Output reference level: VOH/VOL=2.0V/0.8V Output Load: 2TTL gate + CL (50pF) Assumed tT=2ns # Std Symbol -45 -50 Parameter Min. Max. Min. Max. Unit Notes 9 20 tRRH Read Command Hold Time Reference to RAS 0 - 0 - ns 21 tRAL Column Address to RAS Lead Time 20 - 22 - ns 22 tCOH Output Hold After CAS Low 2 - 3 - ns 23 tOFF Output Buffer Turn-Off Delay Time - 2 - 3 ns 24 tASC Column Address Setup Time 0 - 0 - ns 25 tCAH Column Address Hold Time 7 - 8 - ns 26 tOES OE Low to CAS High Set Up 10 - 10 - ns 27 tWCS Write Command Setup Time 0 - 0 - ns 11 28 tWCH Write Command Hold Time 7 - 8 - ns 11 29 tWCR Write Command Hold Time to RAS 40 - 45 - ns 30 tWP Write Command Pulse Width 7 - 8 - ns 31 tRWL Write Command to RAS Lead Time 12 - 13 - ns 32 tCWL Write Command to CAS Lead Time 7 - 8 - ns 33 tDS Data-in setup Time 0 - 0 - ns 12 34 tDH Data-in Hold Time 7 - 8 - ns 12 35 tDHR Data-in Hold Time to RAS 40 - 45 - ns 36 tRWC Read-Modify-Write Cycle Time 104 - 114 - ns 37 tRWD RAS to WE Delay Time (Read-Modify-Write) 59 - 65 - ns 11 38 tCWD CAS to WE Delay Time (Read-Modify-Write) 26 - 28 - ns 11 PRELIMINARY (June, 2002, Version 0.2) 7 8, 10 AMIC Technology, Inc. A420616 Series AC Characteristics (continued) (VCC = 5.0V ± 10%, VSS = 0V, Ta = 0°C to +70°C or -40°C to +85°C) Test Conditions: Input timing reference level: VIH/VIL=2.4V/0.8V Output reference level: VOH/VOL=2.0V/0.8V Output Load: 2TTL gate + CL (50pF) Assumed tT=2ns # 39 Std Symbol tAWD -45 -50 Parameter Column Address to WE Delay Time Unit Notes - ns 11 Min. Max. Min. Max. 34 - 37 (Read-Modify-Write) 40 tOEH OE Hold Time from WE 7 - 8 - ns 41 tOEP OE High Pulse Width 5 - 5 - ns 42 tPC Read or Write Cycle Time (EDO Page) 18 - 20 - ns 14 43 tCPA Access Time from CAS Precharge (EDO Page) - 21 - 23 ns 13 44 tCP CAS Precharge Time 7 - 8 - ns 45 tPCM EDO Page Mode RMW Cycle Time 46 - 50 - ns 46 tCRW EDO Page Mode CAS Pulse Width (RMW) 35 - 38 - ns 47 tRASP RAS Pulse Width 45 200K 50 200K ns 48 tCSR CAS Setup Time ( CAS -before- RAS ) 5 - 5 - ns 3 49 tCHR CAS Hold Time 10 - 10 - ns 3 50 tRPC RAS to CAS Precharge Time 10 - 10 - ns 3 51 tOEZ Output Buffer Turn-off Delay from OE - 2 - 3 ns 8 52 tRASS RAS pulse width ( C -B- R self refresh) 100 - 100 - µs 53 tRPS RAS precharge time ( C -B- R self refresh) 76 - 84 - ns 54 tCHS CAS hold time ( C -B- R self refresh) -50 - -50 - ns PRELIMINARY (EDO Page) ( CAS -before- RAS ) (June, 2002, Version 0.2) 8 AMIC Technology, Inc. A420616 Series Notes: 1. ICC1, ICC3, ICC4, and ICC5 depend on cycle rate. 2. ICC1 and ICC4 depend on output loading. Specified values are obtained with the outputs open. 3. An initial pause of 200µs is required after power-up followed by any 8 RAS cycles before proper device operation is achieved. In the case of an internal refresh counter, a minimum of 8 CAS -before- RAS initialization cycles instead of 8 RAS cycles are required. 8 initialization cycles are required after extended periods of bias without clocks. 4. AC Characteristics assume tT = 2ns. All AC parameters are measured with a load equivalent to two TTL loads and 50pF, VIL (min.) ≥ GND and VIH (max.) ≤ VCC. 5. VIH (min.) and VIL (max.) are reference levels for measuring timing of input signals. Transition times are measured between VIH and VIL. 6. Operation within the tRCD (max.) limit insures that tRAC (max.) can be met. tRCD (max.) is specified as a reference point only. If tRCD is greater than the specified tRCD (max.) limit, then access time is controlled exclusively by tCAC. 7. Operation within the tRAD (max.) limit insures that tRAC (max.) can be met. tRAD (max.) is specified as a reference point only. If tRAD is greater than the specified tRAD (max.) limit, then access time is controlled exclusively by tAA. 8. Assumes three state test load (5pF and a 500Ω Thevenin equivalent). 9. Either tRCH or tRRH must be satisfied for a read cycle. 10. tOFF (max.) defines the time at which the output achieves the open circuit condition; it is not referenced to output voltage levels. 11. tWCS, tWCH, tRWD, tCWD and tAWD are not restrictive operating parameters. They are included in the data sheet as electrical characteristics only. If tWCS ≥ tWCS (min.) and tWCH ≥ tWCH (min.), the cycle is an early write cycle and data-out pins will remain open circuit, high impedance, throughout the entire cycle. If tRWD ≥ tRWD (min.) , tCWD ≥ tCWD (min.) and tAWD ≥ tAWD (min.), the cycle is a read-modify-write cycle and the data out will contain data read from the selected cell. If neither of the above conditions is satisfied, the condition of the data out at access time is indeterminate. 12. These parameters are referenced to UCAS and LCAS leading edge in early write cycles and to WE leading edge in read-modify-write cycles. 13. Access time is determined by the longer of tAA or tCAC or tCPA. 14. tASC ≥ tCP to achieve tPC (min.) and tCPA (max.) values. PRELIMINARY (June, 2002, Version 0.2) 9 AMIC Technology, Inc. A420616 Series Word Read Cycle tRC(1) tRAS(3) tRP(2) RAS tCSH(8) tCRP(9) tRCD(5) tRSH(7) tCRP(9) tCAS(4) UCAS LCAS tRAD(6) tASR(10) Address tRAL(21) tRAH(11) tASC(24) Row Address tCAH(25) Column Address tAR(17) tRCH(19) tRCS(18) tRRH(20) WE tOEA(16) OE tCAC(14) tAA(15) tRAC(13) I/O 0 ~ I/O 15 tOFF(23) tOEZ(51) High-Z Valid Data-out tCLZ(12) : High or Low PRELIMINARY (June, 2002, Version 0.2) 10 AMIC Technology, Inc. A420616 Series Word Write Cycle (Early Write) tRC(1) tRAS(3) tRP(2) RAS tCSH(8) tCRP(9) tRCD(5) tRSH(7) UCAS tCRP(9) tCAS(4) LCAS tAR(17) tRAD(6) tASR(10) tRAL(21) tRAH(11) tCAH(25) tASC(24) Address Row Address Column Address tWCR(29) tCWL(32) tRWL(31) tWP(30) WE tWCS(27) tWCH(28) OE tDHR(35) tDS(33) I/O 0 ~ I/O 15 tDH(34) Valid Data-in : High or Low PRELIMINARY (June, 2002, Version 0.2) 11 AMIC Technology, Inc. A420616 Series Word Write Cycle (Late Write) tRC(1) tRAS(3) tRP(2) RAS tCSH(8) tCRP(9) tRCD(5) tRSH(7) UCAS tCRP(9) tCAS(4) LCAS tAR(17) tRAD(6) tASR(10) tRAL(21) tRAH(11) tCAH(25) tASC(24) Address Row Address Column Address tCWL(32) tRWL(31) tWCR(29) tWP(30) WE tOEH(40) OE tDHR(35) tDS(33) I/O 0 ~ I/O 15 tDH(34) High-Z Vaild Data-in : High or Low PRELIMINARY (June, 2002, Version 0.2) 12 AMIC Technology, Inc. A420616 Series Word Read-Modify-Write Cycle tRWC(36) tRAS(3) tRP(2) RAS tCSH(8) tCRP(9) tRCD(5) tRSH(7) tCRP(9) UCAS LCAS tAR(17) tRAD(6) tASR(10) Address tRAH(11) tASC(24) Row Address tCAH(25) Column Address tAWD(39) tCWL(32) tCWD(38) tRCS(18) tRWD(37) tRWL(31) WE tWP(30) tOEA(16) tOEZ(51) OE tOEH(40) tCAC(14) tAA(15) tDS(33) tDH(34) tRAC(13) I/O 0 ~ I/O 15 High-Z Data-out Data-in tCLZ(12) : High or Low PRELIMINARY (June, 2002, Version 0.2) 13 AMIC Technology, Inc. A420616 Series EDO Page Mode Word Read Cycle tRASP(47) tRP(2) RAS tCSH(8) tCRP(9) tPC(42) tRSH(7) tCRP(9) tRCD(5) tCP(44) tCAS(4) tCAS(4) tCAS(4) UCAS LCAS tCSH(8) tAR(16) tASR(10) Address tRAD(6) tRAH(11) tRAL(21) tCAH(25) tCAH(25) tASC(24) tASC(24) Row Column Column tCAH(25) Column tRCS(18) tRCS(18) tRCH(19) tRCH(25) tRCS(18) WE tAA(15) tAA(15) tRRH(20) tCPA(43) tOEA(16) tOEA(16) tOES(26) OE tCAC(14) tRAC(13) tCAC(14) tOEP(41) tCOH(22) tCLZ(12) I/O 0 ~ I/O 15 Data-out tOFF(23) tCAC(14) tOEZ(51) tOEZ(51) Data-out Data-out tCLZ(12) : High or Low PRELIMINARY (June, 2002, Version 0.2) 14 AMIC Technology, Inc. A420616 Series EDO Page Mode Early Word Write Cycle tRASP(47) tRP(2) RAS tCSH(8) tPC(42) tRSH(7) tCRP(9) tCRP(9) tRCD(5) tCAS(4) tCP(44) tCAS(4) tCP(44) tCAS(4) UCAS LCAS tRAL(21) tRAD(6) tASR(10) Address tCAH(25) tRAH(11) tASC(24) tCAH(25) tASC(24) Row tCAH(25) tASC(24) Column Column tCWL(32) tCWL(32) Column tCWL(32) tRWL(31) tWCS(27) tWCS(27) tWCS(27) tWCH(28) tWCH(28) tWCH(28) WE tWP(30) tWP(30) tWP(30) OE tDH(34) tDS(33) I/O 0 ~ I/O 15 tDH(34) tDS(33) Data-in tDH(34) tDS(33) Data-in Data-in : High or Low PRELIMINARY (June, 2002, Version 0.2) 15 AMIC Technology, Inc. A420616 Series EDO Page Mode Word Read-Modify-Write Cycle tRP(2) tRASP(47) RAS tCSH(8) tCRP(9) tPCM(45) tRSH(7) tCRP(9) tRCD(5) tCRW(46) tCP(44) tCP(44) tCRW(46) tCRW(46) UCAS LCAS tRAL(21) tRAD(6) tASR(10) tCAH(25) tRAH(11) Address Row tCAH(25) tCAH(25) tASC(24) tASC(24) Column tASC(24) Column Column tCWL(32) tCWL(32) tCWL(32) tRWD(37) tRWL(31) tRCS(18) tCWD(38) tCWD(38) tCWD(38) WE tWP(30) tAWD(39) tWP(30) tAWD(39) tOEA(16) tWP(30) tAWD(39) tOEA(16) tOEA(16) OE tOEH(40) tCAC(14) tCPA(43) tAA(15) tAA(15) tOEZ(51) tAA(15) tOEZ(51) tDH(34) tRAC(13) tOEZ(51) tDH(34) tDH(34) tDS(33) tDS(33) tDS(33) I/O 0 ~ I/O 15 tCPA(43) High-Z tCLZ(12) tCLZ(12) tCLZ(12) Data-in Data-out Data-in Data-out Data-in Data-out : High or Low PRELIMINARY (June, 2002, Version 0.2) 16 AMIC Technology, Inc. A420616 Series RAS Only Refresh Cycle tRC(1) tRAS(3) tRP(2) RAS tRPC(50) tCRP(9) UCAS LCAS tASR(10) tRAH(11) Row Address Note: WE, OE = Don't care. : High or Low CAS Before RAS Refresh Cycle tRC(1) tRP(2) tRAS(3) tRP(2) RAS tRPC(50) tCHR(49) tCSR(48) tCP(44) UCAS LCAS tOFF(23) High-Z I/O 0 ~ I/O 15 Note: WE, OE, Address = Don't care. PRELIMINARY (June, 2002, Version 0.2) : High or Low 17 AMIC Technology, Inc. A420616 Series Hidden Refresh Cycle (Word Read) tRC(1) tRC(1) tRAS(3) tRP(2) tRAS(3) tRP(2) RAS tAR(17) tCRP(9) tRSH(7) tRCD(5) tCHR(49) tCRP(9) UCAS LCAS tRAD(6) tASR(10) tRAL(21) tCAH(25) tRAH(11) tASC(24) A0~A8 Row Column tRCS(18) tRRH(20) WE tAA(15) tOEZ(51) tOEA(16) OE tCAC(14) tOFF(23) tCLZ(12) tRAC(13) I/O0 ~ I/O 15 High-Z Valid Data-out : High or Low PRELIMINARY (June, 2002, Version 0.2) 18 AMIC Technology, Inc. A420616 Series Hidden Refresh Cycle (Early Word Write) tRC(1) tRC(1) tRAS(3) tRP(2) tRAS(3) tRP(2) RAS tAR(17) tCRP(9) tRSH(7) tRCD(5) tCHR(49) tCRP(9) UCAS LCAS tRAD(6) tASR(10) tRAH(11) tRAL(21) tCAH(25) tASC(24) Address Row Column tWCS(27) tWCH(28) tWP(30) WE OE tDS(33) I/O 0 ~ I/O 15 tDH(34) Valid Data-in : High or Low PRELIMINARY (June, 2002, Version 0.2) 19 AMIC Technology, Inc. A420616 Series EDO Page Mode Read-Early-Write Cycle (Pseudo Read-Modify-Write) tRP(2) tRASP(47) RAS tCSH(8) tPC(42) tRCD(5) tCRP(9) tCAS(4) tPC(42) tCP(44) tCAS(4) tRSH(7) tCP(44) tCAS(4) tCPR(9) UCAS LCAS tRAL(21) tRAD(6) tASR(10) Address tASC(24) tRAH(11) tASC(24) Row tCAH(25) tASC(24) tCAH(25) Column Column tCAH(25) Column tRCH(19) tRCS(18) tWCS(27) WE tWCH(28) tAA(15) tAA(15) tCAP(43) tDS(33) tDH(34) tRAC(13) tCAC(14) tCAC(14) tOEA(16) OE tCOH(22) I/O 0 ~ I/O 15 Data-out Data-out Data-in : High or Low PRELIMINARY (June, 2002, Version 0.2) 20 AMIC Technology, Inc. A420616 Series Self Refresh Mode tRP(2) tRASS(52) tRPS(53) RAS tCHS(54) tCSR(48) tRPC(50) tCRP(9) UCAS LCAS tCP(44) tASR(10) ROW A0 ~ A9 COL tOFF(23) High-Z I/O 0 ~ I/O 15 : High or Low Note: WE, OE = Don't care. n Self Refresh Mode. a. Entering the Self Refresh Mode: The A420616 Self Refresh Mode is entered by using CAS before RAS cycle and holding RAS and CAS signal “low” longer than 100µs. b. Continuing the Self Refresh Mode: The Self Refresh Mode is continued by holding RAS “low” after entering the Self Refresh Mode. It does not depend on CAS being “high” or “low” after entering the Self Refresh Mode continue the Self Refresh Mode. c. Exiting the Self Refresh Mode: The A420616 exits the Self Refresh Mode when the RAS signal is brought “high”. PRELIMINARY (June, 2002, Version 0.2) 21 AMIC Technology, Inc. A420616 Series Capacitance (f = 1MHz, Ta = Room Temperature, VCC = 5.0V ± 10%) Symbol Signals CIN1 A0 – A9 CIN2 RAS , UCAS , Parameter Max. Unit Test Conditions 5 pF Vin = 0V Input Capacitance 7 pF Vin = 0V I/O Capacitance 7 pF Vin = Vout = 0V 45ns 50ns LCAS , WE , OE CI/O I/O0 - I/O15 Ordering Codes Package RAS Access Time Refresh Cycle Self-Refresh SOJ 42L (400mil) A420616S-45 A420616S-50 1K Yes TSOP 44/50L type II (400mil) A420616V-45 A420616V-50 1K Yes TSOP 44/50L type II (400mil) A420616V-45U A420616V-50U 1K Yes Note: -U is for industrial operating temperature range. PRELIMINARY (June, 2002, Version 0.2) 22 AMIC Technology, Inc. A420616 Series Package Information unit: inches/mm 22 1 21 E 42 HE SOJ 42L Outline Dimensions L A2 A C D A1 e D b b1 S Seating Plane e1 y θ Dimensions in inches Symbol Dimensions in mm Min Nom Max Min Nom Max A 0.132 0.138 0.145 3.35 3.51 3.68 A1 0.025 - - 0.64 - - A2 0.105 0.110 0.115 2.67 2.79 2.92 b1 0.026 0.028 0.032 0.66 0.71 0.81 b 0.016 0.018 0.020 0.41 0.46 0.51 C 0.007 0.008 0.011 0.18 0.20 0.28 D 1.070 1.075 1.080 27.18 27.31 27.43 E 0.395 0.400 0.405 10.03 10.16 10.29 e - 0.050 - - 1.27 - e1 0.360 0.370 0.380 9.14 9.40 9.65 HE 0.435 0.440 0.455 11.05 11.18 11.30 L 0.088 - - 2.24 - - S - - 0.043 - - 1.09 y - - 0.004 - - 0.10 θ 0° - 10° 0° - 10° 2Notes: 1. The maximum value of dimension D includes end flash. 2. Dimension E does not include resin fins. 3. Dimension e1 is for PC Board surface mount pad pitch design reference only. 4. Dimension S includes end flash. PRELIMINARY (June, 2002, Version 0.2) 23 AMIC Technology, Inc. A420616 Series Package Information TSOP 44/50L (Type II) Outline Dimensions unit: inches/mm 50 26 Detail "A" E HE RAD R θ RAD R1 L L1 1 25 D A2 e A1 B D S A c Detail "A" y Seating Plane Dimensions in inches Symbol Min Nom Max Dimensions in mm Min Nom Max A - - 0.048 - - 1.20 A1 0.002 - 0.006 0.05 - 0.15 A2 0.037 0.039 0.042 0.95 1.00 1.05 B 0.012 - 0.018 0.30 - 0.45 c 0.005 - 0.008 0.12 - 0.21 D 0.820 0.825 0.830 20.82 20.95 21.08 E 0.400 BSC 10.16 BSC HE 0.463 BSC 11.76 BSC L 0.016 0.020 0.024 0.40 0.50 L1 0.031 REF 0.80 REF e 0.031 BSC 0.80 BSC 0.60 R 0.005 - 0.010 0.12 - 0.25 R1 0.005 - - 0.12 - - S θ 0.0435 REF 0° - 0.875 BSC 5° 0° - 5° Notes: 1. The maximum value of dimension D includes end flash. 2. Dimension E does not include resin fins. 3. Dimension S includes end flash. PRELIMINARY (June, 2002, Version 0.2) 24 AMIC Technology, Inc.