SMT Power Inductor HMU1056L Type Features RoHS compliant. Low profile, SMD type. High current. Magnetic shielded. High energy storage and low DCR. Provided with embossed carrier tape packing. Ideal for power source circuits, DC-DC converter, DC-AC inverters inductor applications. In addition to the standard versions shown here, customized inductors are available to meet your exact requirements. Mechanical Dimension : RECOMMENDED PAD PATTERNS F B C 2.9 E 3.8 2.0 G 2.5 8.5 H A D I 11.0 Electrical Characteristics : At 25 C : O 1 PART NO. L (uH) UNIT : mm/inch A = 10.40 / 0.409 Max. B = 10.40 / 0.409 Max. C = 5.60 / 0.220 Max. D = 1.40 / 0.055 E = 3.80 / 0.150 F = 2.90 / 0.114 G = 2.60 / 0.102 H = 5.50 / 0.217 I = 2.60 / 0.102 100KHz, 1V DCR (m ) MAX IRATED2 (Adc) HMU1056L-R36 0.36 1.7 24.0 HMU1056L-0R8 0.80 2.4 16.0 12.0 HMU1056L-1R4 1.40 4.1 HMU1056L-2R2 2.20 5.3 9.6 HMU1056L-3R2 3.20 7.5 7.8 HMU1056L-4R3 4.30 10.5 6.8 HMU1056L-5R7 5.70 12.4 5.8 HMU1056L-7R2 7.20 18.0 5.3 HMU1056L-8R8 8.80 23.8 4.8 1. Tolerance of inductance : 0.36uH 30% 0.80~8.80uH 20% 2. IRATED is the DC current which cause the inductance drop less than 35% (20% typical) of its nominal inductance without current and the surface temperature of the part increase less than 45OC. 3. Operating temperature : -20OC to 105OC ( including self-temperature rise ). DELTA ELECTRONICS, INC. (TAOYUAN PLANT CPBG) 252, SAN YING ROAD, KUEISAN INDUSTRIAL ZONE, TAOYUAN SHIEN, 333, TAIWAN, R.O.C. TEL: 886-3-3591968; FAX: 886-3-3591991 http://www.deltaww.com 132