SMT Inductors, SIMID Series B82494-A SIMID 1008-A, SIMID 1008-G B82494-G Size 1008 (EIA) or 2520 (IEC) Rated inductance 0,010 to 100 µH Rated current 10 to 280 mA Construction ■ Ferrite core ■ Molded epoxy encapsulation Features ■ High Q factor ■ High resonance frequency ■ Suitable for reflow (IR and vapor phase) and wave soldering Applications ■ ■ ■ ■ Filtering of supply voltages, coupling, decoupling Antenna systems Automotive electronics Telecommunications Terminals ■ Electro-plated ■ 2–4 µm Ni, ≥ 5 µm Sn60Pb40 ■ Base material phosphor bronze Marking Marking on component: L value (in µH) Minimum data on reel: Manufacturer, part number, ordering code, L value and tolerance of L value, quantity, date of packing Delivery mode 8-mm blister tape, wound on 178-mm ∅ reel For details on taping, packing and packing units see page 153 82 04/00 SMT Inductors, SIMID Series B82494-A SIMID 1008-A, SIMID 1008-G B82494-G General technical data Rated inductance LR Measured with impedance analyzer HP 4191A at frequency fL Q factor Qmin Measured with impedance analyzer HP 4191A at frequency fQ Rated current IR Maximum permissible dc with inductance decrease ∆L /L0 ≤ 10 % and temperature increase of ≤ 20 K at rated temperature of 85°C Self-resonance frequency fres, min Measured with network analyzer HP 8753 DC resistance Rmax Measured at 20°C ambient temperature, measuring current < IR Climatic category In accordance with IEC 60068-1 55/085/56 (– 55°C/+ 85°C/56 days damp heat test) Solderability In accordance with IEC 60062-2-58 (230 ± 5)°C, (3 ± 0,5) s Wetting of soldering area: ≥ 90 % Resistance to soldering heat In accordance with IEC 60068-2-20 260°C, 10 s ∆L /L ≤ ± 5 %; ∆Q /Q ≤ ± 20 % after 5 minutes preheating at 120°C Permissible PCB bending 2 mm (100 mm long standard PCB) Weight Approx. 21 mg 83 04/00 SMT Inductors, SIMID Series B82494-A SIMID 1008-A, SIMID 1008G B82494-G Dimensional drawing 1,6±0,2 1,2±0,1 1) 0,4±0,2 1) _ 0,2 2,5 +0,3 2±0,2 Marking Beschriftung SSB0702-5 A Layout recommendation B C D B SSB1227-Z Dimensions (mm) A B C D Wave soldering 1,2 1,25 1,5 4,0 Reflow soldering 1,6 1,05 1,5 3,5 1) Soldering area, tinned 84 04/00 SMT Inductors, SIMID Series B82494-A SIMID 1008-A, SIMID 1008-G B82494-G Characteristics and ordering codes LR µH Qmin fL; fQ MHz IR mA Rmax Ω fres, min MHz Ordering code 10 10 10 100 100 100 280 270 255 0,32 0,34 0,38 2500 2200 1800 B82494-A1100-K B82494-A1120-K B82494-A1150-K 0,018 0,022 0,027 10 15 15 100 100 100 250 240 230 0,40 0,43 0,47 1550 1350 1150 B82494-A1180-K B82494-A1220-K B82494-A1270-K 0,033 0,039 0,047 15 15 15 100 100 100 220 215 205 0,51 0,55 0,59 1000 890 770 B82494-A1330-K B82494-A1390-K B82494-A1470-K 0,056 0,068 0,082 15 15 15 100 100 100 200 190 185 0,63 0,68 0,73 670 590 520 B82494-A1560-K B82494-A1680-K B82494-A1820-K 0,10 0,12 0,15 0,18 10 10 10 10 25,2 25,2 25,2 25,2 175 170 160 155 0,80 0,87 0,98 1,05 460 400 340 300 B82494-A1101-K B82494-A1121-K B82494-A1151-K B82494-A1181-K 0,22 0,27 0,33 25 25 25 25,2 25,2 25,2 190 180 170 0,70 0,75 0,85 230 210 190 B82494-A1221-K B82494-A1271-K B82494-A1331-K 0,39 0,47 0,56 25 25 25 25,2 25,2 25,2 160 155 150 0,95 1,00 1,10 175 160 150 B82494-A1391-K B82494-A1471-K B82494-A1561-K 0,68 0,82 25 25 25,2 25,2 140 130 1,25 1,40 135 125 B82494-A1681-K B82494-A1821-K 1,0 1,2 1,5 25 25 25 7,96 7,96 7,96 195 180 170 0,65 0,75 0,85 115 100 90 B82494-A1102-K B82494-A1122-K B82494-A1152-K 1,8 2,2 2,7 25 25 25 7,96 7,96 7,96 160 155 145 0,95 1,05 1,20 85 80 75 B82494-A1182-K B82494-A1222-K B82494-A1272-K 3,3 3,9 4,7 25 25 25 7,96 7,96 7,96 135 130 125 1,30 1,40 1,55 65 60 55 B82494-A1332-K B82494-A1392-K B82494-A1472-K Tolerance Non-shielded 0,010 0,012 0,015 ± 10 % ^ K 85 04/00 SMT Inductors, SIMID Series B82494-A SIMID 1008-A, SIMID 1008-G B82494-G Characteristics and ordering codes (continued) LR µH Qmin fL; fQ MHz IR mA 25 25 25 7,96 7,96 7,96 120 115 105 10 12 15 25 25 25 2,52 2,52 2,52 18 22 27 25 25 20 33 39 47 56 68 82 100 Tolerance Rmax Ω fres, min MHz Ordering code 1,75 1,95 2,2 50 45 40 B82494-A1562-K B82494-A1682-K B82494-A1822-K 80 75 70 3,5 3,8 4,4 32 30 28 B82494-A1103-K B82494-A1123-K B82494-A1153-K 2,52 2,52 2,52 65 60 115 5,0 5,8 6,3 25 22 21 B82494-A1183-K B82494-A1223-K B82494-A1273-K 20 20 20 2,52 2,52 2,52 110 90 80 7,1 9,5 11,0 20 18 17 B82494-A1333-K B82494-A1393-K B82494-A1473-K 20 20 20 15 2,52 2,52 2,52 0,796 75 70 65 60 12,1 16,6 19,0 21,0 16 15 13 12 B82494-A1563-K B82494-A1683-K B82494-A1823-K B82494-A1104-K 40 40 40 40 2,52 2,52 2,52 2,52 18 14 13 12 4,5 5,2 5,7 6,6 20 18 15 14 B82494-G1273-K B82494-G1333-K B82494-G1393-K B82494-G1473-K 40 25 25 25 2,52 2,52 2,52 0,796 10 17 14 10 7,1 6,5 7,4 8,4 13 13 13 12 B82494-G1563-K B82494-G1683-K B82494-G1823-K B82494-G1104-K Non-shielded 5,6 6,8 8,2 ± 10 % ^ K Shielded 1) 27 33 39 47 ± 10 % ^ K 56 68 82 100 1) Not for new design 86 04/00