LB115S 115W Single Output LED Series Features Small size of 2” x 4” x 1.3” 75W convection cooled/115 Watts with 200 LFM Universal Input 90-264Vac Meets EN55015 Conducted EMI Meets IEC61000-3-2 Class C for less than 1 Watt to full power Approved to UL/CSA/IEC/EN60950-1, 2nd Edition Level V Efficiency Compliant -40˚C start up -20˚C to 70˚C Operating temperature Range 3 Year Warranty Optional LED indicator for power-on Description The LB115S LED Series provide a reliable power source with high power density in 2” x 4” x 1.3” package. Fully compliant to the applicable safety and Global Lighting EMC standards, these models will allow easy integration into many Lighting fixtures and other industrial applications. All 4 models are CE marked to low voltage directive and approved to standards of UL/CSA/IEC/EN60950-1 2nd edition. Model Selection Model Output Current Number LB115S12K Volts 12 V Convection Cooled 6.25 A LB115S24K 24 V 3.13A LB115S48K 48 V 1.56A LB115S56K 56 V 1.34A Output Current Forced air(200 LFM) (Total Power) 9.00A (108 Watts) 4.58A (110 Watts) 2.40A (115 Watts) 2.05A (115 Watts) Ripple & Total OVP Noise* 0.5%RMS, 1.5% pk-pk 0.5%RMS, 1% pk-pk 0.5%RMS, 1% pk-pk 0.5%RMS, 1% pk-pk Regulation ±2% Threshold 14.0 ± 1.1V ±2% 28.0 ± 2.5V ±2% 55.0 ± 4.0V ±2% 63.0 ± 4.0V Notes: * At -20C, the noise and ripple is 2% of the output. General & Input Specifications PARAMETER SPECIFICATION AC Input Voltage: 90-264Vac, single phase AC Input Frequency: 47-63Hz AC Input Current: 115Vac: 2A, 230Vac: 1A Inrush Current: 65A maximum @ 25C Earth Leakage Current (Input–Earth): <350uA@264Vac, 60 Hz input, NC Input Fuse: F1:4A, 250VAC www.slpower.com LB115S 2-OCT-14 NOTES Fuse provided on all models 1 LB115S 115W Single Output LED Series Efficiency Typical Measured @ 25˚C LB115S12K 89% @230V ac, full load 86.5%@115V ac, full load LB115S24K 89% @230V ac, full load 87%@115V ac, full load LB115S48K 90% @230V ac, full load 88%@115V ac, full load LB115S56K 90% @230V ac, full load 88%@115V ac, full load Operating Temperature -20˚C to 70˚C -40˚C start up (full load) For 12V output, the maximum load is 75% Storage Temperature -40˚C to 85˚C Turn-on Time: <2 Seconds @115Vac(<3S for 12V output) Hold-up Time: 12mS minimum from loss of ac input at 115 Vac <5 Seconds @115Vac for -20˚C ambient DC Output Specifications PARAMETER SPECIFICATION NOTES Max of 75 Watts for Convection cooled Output Power: Cooling: Max of 115 Watts for fan cooled (48 & 56V Models) Maximum 108 Watts for 12V output -20 to 50˚C ambient Convection Forced Air of 200 LFM Total Regulation: ±2% for all models Total regulation is the maximum deviation from nominal voltage for all loading conditions Overload Protection: 120% - 180% of rated output current value, Hiccup Mode For 12V output, it is 110 to 180% Short Circuit Protection: Short across the output terminals will not cause damage to the unit. Hiccup Mode Overvoltage Protection: OVP firing reduces output voltage to <50% of nominal in <50mS. See chart for trip range Overtemperature Protection: Automatic Power Shutdown Minimum Load: No minimum load is required Ripple and Noise: 0.5% RMS, 1% pk-pk for all models. Thermistor temperature is 130˚C 20 MHz Bandwidth, differential mode. Measured with noise probe directly across output terminals, and load terminated with 0.1µF ceramic and 10µF low ESR capacitors Transient Response: 500µs typ. response time for return to within 0.5% of final value for a 50% load change, ∆i/∆t< 0.2A/µs. Max. voltage deviation is 3.5%. Measured @ 25˚C Overshoot: 5% overshoot at turn-on, 5% overshoot at turn-off, under all conditions. 6% for 12V output www.slpower.com LB115S 2-OCT-14 2 LB115S 115W Single Output LED Series Safety Standard Compliance Agency CONDITIONS nd Edition EN/CSA/UL/IEC 60950-1, 2 UL nd CSA CSA 60950-1, 2 Demko EN 60950-1, 2nd CB Report IEC 60950-1, 2nd Double/Reinforced between Input and Output Isolation Type: Isolation Specifications PARAMETER CONDITIONS Insulation Safety Rating: Input to Ground Electric Strength Test Voltage: Rating NOTES Basic Insulation Input to Output Double/Reinforced Input to Ground 1900Vac Input to Output 3000Vac Output to Ground 500Vac . Environmental Specifications PARAMETER Operating Temperature: Temperature Derating: Cooling: Storage Temperature: Altitude: Relative Humidity: Shock: Vibration: SPECIFICATION NOTES -20°C to +70°C -40°C Startup guaranteed 60% derating at 70°C Convection/ Airflow -40°C to +85°C Operating: -500 to 3,000 meter Non-operating: -500 to 40,000 ft. 5% to 95%, non-condensing Non-Operating: Half-sine, 40 gpk, 10mS, 3 axes, 6 shocks total Random vibration per MIL-STD-810E, Method 514.4, Cat. 1, Figure 514.4-1, 1 hr in each of three axes 75 Watts convection Reliability Specifications PARAMETER SPECIFICATION NOTES MTBF: 574K hours, 25°C ambient, full load Calculation is done based on Telcordia. Reports for each model is available Warranty: 3 Years Limited HALT Data: Per SL Power Halt procedure Report is available www.slpower.com LB115S 2-OCT-14 3 LB115S 115W Single Output LED Series EMI/EMC Compliance PARAMETER SPECIFICATION NOTES Conducted Emissions: EN55011/22 Class B; FCC Part 15 Also meets EN55015 Class B Radiated Emissions: EN55011/22 Class A; FCC Part 15 Harmonic Current Emissions EN61000-3-2, Class A,B,C &D Voltage Fluctuations & Flicker EN61000-3-3 Static Discharge Immunity: EN61000-4-2, Level 4: 6kV contact, 8kV air, Criteria A RF Field Susceptibility EN61000-4-3, Level 3 (3V/m), Criteria A Fast Transients/Bursts Surge susceptibility Conducted RF susceptibility Power Frequency Magnetic Field Test Voltage Sags & Surges EN61000-4-4, Level 3 (PS: 2kV-40A, other lines 1kV-20A), Criteria A EN61000-4-5, Installation Class 3 (1kV diff. mode, 2kV common mode), Criteria A EN61000-4-6, Level 3 (3Vrms), Criteria A Meets class C from 5 to 115 Watts. This is based on limits set @ 115 Watt Performance criteria are defined as following: A – Normal performance during and after the test B – Temporary degradation, self-recoverable C – Temporary degradation, operator intervention required to recover the operation EN61000-4-8, Level 3 (3A/m), Criteria A EN61000-4-11, 95% dip/0.5 cycle (Criteria A), 60%/5cycles (Criteria B ), 30%/25 cycles (Criteria A). loading is 70% of 100 watts with 100 Vac input. Notes: 1. Specifications subject to change without notice. 2. Specifications are for convection rating at factory settings with 115Vac input and 25°C ambient unless otherwise stated. www.slpower.com LB115S 2-OCT-14 4 LB115S 115W Single Output LED Series Mechanical Drawing Connector Information Input Connector J2 PIN 1) AC NEUTRAL PIN 2) EMPTY PIN 3) AC LINE Mating Connector: Tyco/AMP 640250-3 Terminals : 3-640252-1 DC Output Connector J3 PIN 1) +Vout PIN 2) +Vout PIN 3) +Vout PIN 4) -Vout PIN 5) -Vout PIN 6) -Vout Mating Connector: AMP 640250-6 Terminals : 3-640252-1 Ground (FG)J1 19-30258-0187 (Keystone 1285) (Zierick 895)(.187*0.020) Mating Connector Molex 190020005 1. All dimensions in inches (mm) undefined tolerance is ±.02” (0.5mm). 2. Mounting holes should be connected together for EMI purpose 3. FG is safety ground connection 4. This power supply requires mounting on metal standoffs 0.20” (5mm) Min. in height www.slpower.com LB115S 2-OCT-14 5 LB115S 115W Single Output LED Series Characteristic Curves Output Power vs. Temperature Efficiency vs. Loading www.slpower.com LB115S 2-OCT-14 6 LB115S 115W Single Output LED Series Ripple & Noise To verify that the output ripple and noise does not exceed the level specified in the product specification, measured using a scope probe socket with 0.1uF ceramic and a 10uF electrolytic capacitor connected in parallel across it, 20MHz BW. Output Overload Characteristic Overvoltage Protection www.slpower.com LB115S 2-OCT-14 7 LB115S 115W Single Output LED Series Turn On Time Hold Up Time CH1: Vout CH3: Vin Min_Limit: 16 Vin: 115 Vac Iout: 2.40 Amps Meas: 23.2 mS Data Sheet © 2014 SL Power Electronics Corp. The information and specifications contained herein are believed to be correct at the time of publication. However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice. www.slpower.com LB115S 2-OCT-14 8