DU06S/D Series 6W DC/DC CONVERTER, DIP-Package, High Isolation FEATURES Efficiency up to 80% Reinforced Insulation rated for 300VAC Working Voltage Isolation Voltage 4,000VACrms UL/EN60601-1&EN60950-1 Safety Approval Overload Protection Fully regulated Output Voltage Low Leakage Current Operating Temperature Range –40°C to +75 °C Complies with EN55022, class A 3 Years Product Warranty The.DU06S/D series are miniature, DIP Package, isolated 6W DC/DC converters with 4,000VACrms isolation. It offers short circuit protection and allows a wide operating temperature range of –40°C to +75°C. These isolated DC/DC converters are the latest offering from a world leader in power systems technology and manufacturing ― Delta Electronics, Inc. With creative design technology and optimization of component placement, these converters possess outstanding electrical and thermal performance, as well as extremely high reliability under highly stressful operating conditions.. Model List Model Number DU06S1205A DU06S1212A DU06D1212A DU06D1215A DU06S2405A DU06S2412A DU06D2412A DU06D2415A DU06S4805A DU06S4812A DU06D4812A DU06D4815A Input Voltage (Range) Output Voltage VDC VDC 5 12 ±12 ±15 5 12 ±12 ±15 5 12 ±12 ±15 12 (9 ~ 18) 24 (18 ~ 36) 48 (36 ~ 75) Output Current Input Current Max. Min. @Max. Load @No Load Reflected Ripple Current mA 1000 500 ±250 ±200 1000 500 ±250 ±200 1000 500 ±250 ±200 mA 200 100 ±50 ±40 200 100 ±50 ±40 200 100 ±50 ±40 mA(typ.) 570 641 641 641 278 313 313 313 139 156 156 156 mA(typ.) mA (typ.) 30 60 20 30 10 15 Max. capacitive Load uF 1000 470 220* 220* 1000 470 220* 220* 1000 470 220* 220* Efficiency (typ.) @Max. Load % 75 78 78 78 77 80 80 80 77 80 80 80 * For each output Input Characteristics Parameter Input Surge Voltage (1 sec. max.) Start-Up Voltage Under Voltage Shutdown Short Circuit Input Power Internal Power Dissipation Conducted EMI DS_DU06S/D_07192012 Model 12V Input Models 24V Input Models 48V Input Models 12V Input Models 24V Input Models 48V Input Models 12V Input Models 24V Input Models 48V Input Models All Models Min. Typ. Max. Unit -0.7 25 ---0.7 50 ---0.7 100 --7 8 9 VDC 13 15 18 30 33 36 ----8.5 ----16 ----34 ----3000 mW ----2500 mW Compliance to EN55022,class A and FCC part 15,class A E-mail: [email protected] http://www.delta.com.tw/dcdc P1 Output Characteristics Parameter Conditions Min. Typ. Max. --- ±0.5 ±1.0 % --- ±0.5 ±2.0 % % Output Voltage Accuracy Output Voltage Balance Dual Output, Balanced Loads Unit Line Regulation Vin=Min. to Max. --- ±0.3 ±0.5 Load Regulation Io=25% to 100% --- ±0.5 ±1.0 % 5V Output Models --- 75 100 mV P-P Other Output Models --- 100 150 mV P-P Over Line, Load & Temp. --- --- 180 mV P-P Ripple & Noise (20MHz) Ripple & Noise (20MHz) Ripple & Noise (20MHz) --- --- 25 mV rms Transient Recovery Time --- 300 500 uS --- ±3 ±6 % --- ±0.02 ±0.05 %/℃ 120 150 --- % 25% Load Step Change Transient Response Deviation Temperature Coefficient Over Load Protection Foldback Short Circuit Protection Continuous Isolation, Safety Standards Parameter I/O Isolation Voltage (rated) Conditions Min. Typ. Max. Unit 60 Seconds 4000 --- --- VACrms Flash tested for 1 Second 6000 --- --- VPK 240VAC, 60Hz --- --- 2 uA I/O Isolation Resistance 500 VDC 10 --- --- GΩ I/O Isolation Capacitance 100KHz, 1V --7 13 cUL/UL60950-1, CSA C22.2 No. 60950-1-03 UL60601-1,CSA C22.2 No.601-1, IEC/EN 60950-1, IEC/EN 60601-1 IEC60950-1 CB report, cUL/UL 60950-1 certificate UL60601-1 UL certificate pF I/O Isolation Test Voltage Leakage Current Safety Standards Safety Approvals General Characteristics Parameter Conditions Min. Typ. Max. Unit --- 150 --- KHz 700,000 --- --- Hours Switching Frequency MIL-HDBK-217F@25℃, Ground Benign MTBF(calculated) Recommended Input Fuse 12V Input Models 24V Input Models 48V Input Models 1200mA Slow-Blow Type 600mA Slow-Blow Type 300mA Slow-Blow Type Environmental Characteristics Parameter Operating Derating) Temperature Range (with Conditions Min. Max. Unit Ambient -40 +75 ℃ ℃ Case Temperature --- +95 Storage Temperature Range -50 +125 ℃ Humidity (non condensing) --- 95 % rel. H 260 ℃ Cooling Lead Temperature (1.5mm from case for 10Sec.) DS_DU06S/D_07192012 Free-Air convection --- E-mail: [email protected] http://www.delta.com.tw/dcdc P2 Output Power (%) Power Derating Curve Notes 1 2 3 4 5 6 Specifications typical at Ta=+25℃, resistive load, nominal input voltage and rated output current unless otherwise noted. Transient recovery time is measured to within 1% error band for a step change in output load of 75% to 100%. Ripple & Noise measurement bandwidth is 0-20 MHz. These power converters require a minimum output loading to maintain specified regulation, operation under no-load conditions will not damage these modules; however, they may not meet all specifications listed. All DC/DC converters should be externally fused at the front end for protection. Specifications subject to change without notice. Mechancial Drawing 3.8 12.0 [0.47] [0.15] Pin Connections 0.5 [0.02] Mechanical Dimensions 0.60 [0.024] 20.32 [0.80] 2.54 [0.10] 31.8 [1.25] +Vin 11 No Pin Common 12 -Vout No Pin 13 +Vout -Vout 15 No Pin +Vout 23 -Vin -Vin 24 -Vin -Vin 13 5.08 [0.20] 2.0 [0.08] 2.54 [0.10] 15 23 Dual Output +Vin 12 Bottom View 24 Single Output 1 20.3 [0.80] 11 15.22 [0.60] 1 Pin ►All dimensions in mm (inches) ►Tolerance: X.X±0.25 (X.XX±0.01) X.XX±0.13 ( X.XXX±0.005) ►Pin diameter ⇔ 0.6 ±0.05 (0.024±0.002) Physical Outline Case Size : 31.8x20.3x12.0mm (1.25x0.8x0.47 Inches) Case Material : Non-Conductive Black Plastic (flammability to UL 94V-0 rated) Weight : 18g DS_DU06S/D_07192012 E-mail: [email protected] http://www.delta.com.tw/dcdc P3 Part Numbering System D U 06 S 12 05 A Form factor Family series Watt Number of Outputs Input Voltage Output Voltage Option Code D-DIP P-SIP S-SMD A~Z 01:1W 02:2W 03:3W 04:4W 06:6W 03:3.3V 05: 5V 12:12V 24: 24V 48:48V 03:3.3V 05: 5V 12:12V 15: 15V 24: 24V A - Std. Functions S - Single D- Dual WARRANTY Delta offers a three(3) years limited warranty. Complete warranty information is listed on our web site or is available upon request from Delta. Information furnished by Delta is believed to be accurate and reliable. However, no responsibility is assumed by Delta for its use, nor for any infringements of patents or other rights of third parties, which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Delta. Delta reserves the right to revise these specifications at any time, without notice. DS_DU06S/D_07192012 E-mail: [email protected] http://www.delta.com.tw/dcdc P4