ISOCOM COMPONENTS IS1100 DESCRIPTION The IS1100 series optocoupler consists of an infrared emitting diode optically coupled to an NPN silicon photo transistor. 1 4 2 3 This device belongs to Isocom Compact Range of Optocouplers. FEATURES • • • • • • Half Pitch 1.27mm High AC Isolation voltage 3750VRMS CTR Selections Available Wide Operating Temperature Range -55°C to 110°C Pb Free and RoHS Compliant UL Approval E91231, Model THP All dimensions in mm. ABSOLUTE MAXIMUM RATINGS (TA = 25°C) Input Diode APPLICATIONS • • • • Switching Mode Power Supply Industrial System Controllers Measuring Instruments Signal Transmission between Systems of Different Potentials and Impedances ORDER INFORMATION • Available in Tape and Reel with 1000pcs per reel ISOCOM COMPONENTS 2004 LTD Unit 25B, Park View Road West, Park View Industrial Estate Hartlepool, Cleveland, TS25 1UD, United Kingdom Tel: +44 (0)1429 863 609 Fax : +44 (0)1429 863 581 e-mail: [email protected] http://www.isocom.com 1 30/4/2013 Forward Current Reverse Voltage Power dissipation 50mA 6V 70mW Output Transistor Collector to Emitter Voltage BVCEO Emitter to Collector Voltage BVECO Collector Current Power Dissipation 80V 7V 50mA 150mW Total Package Isolation Voltage Total Power Dissipation Operating Temperature Storage Temperature Lead Soldering Temperature (10s) 3750VRMS 200mW -55 to 110 °C -55 to 125 °C 260°C ISOCOM COMPONENTS ASIA LTD Hong Kong Office, Block A, 8/F, Wah Hing Industrial mansion, 36 Tai Yau Street, San Po Kong, Kowloon, Hong Kong. Tel: +852 2995 9217 Fax : +852 8161 6292 e-mail: [email protected] DC93168 ISOCOM COMPONENTS IS1100 ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise specified) INPUT Parameter Symbol Test Condition Min Typ. Max Unit Forward Voltage VF IF = 20mA 1.2 1.4 V Reverse Current IR VR = 4V 10 μA Input Capacitance CIN VF = 0V, f = 1KHz 30 250 pF Symbol Test Condition Min Typ. Max Unit Collector-Emitter breakdown Voltage BVCEO IC = 0.1mA, IF = 0mA 80 V Emitter-Collector breakdown Voltage BVECO IE = 0.1mA, IF = 0mA 7 V ICEO VCE = 20V, IF = 0mA OUTPUT Parameter Collector-Emitter Dark Current 2 30/4/2013 100 DC93168 nA ISOCOM COMPONENTS IS1100 ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise specified) COUPLED Parameter Current transfer ratio Symbol Test Condition CTR IF = 5mA, VCE = 5V IS1100 Min Typ. Max Unit % 50 600 IS1101 40 80 IS1102 63 125 IS1103 100 200 IS1104 160 320 IS1105 50 150 IS1106 100 300 IS1107 80 160 IS1108 130 260 IS1109 200 400 IF = 10mA, VCE = 5V IF = 10mA, VCE = 5V Collector-Emitter Saturation Voltage VCE(sat) IF = 10mA, IC = 1mA Input to Output Isolation Voltage VISO See note 1 3750 VRMS Input to Output Isolation Resistance RISO VIO= 500V See note 1 5x1010 Ω Floating Capacitance Cf VF = 0V, f = 1MHz 0.3 Output Rise Time tr VCE = 2V, Ic = 2mA, RL = 100Ω 6 18 µs Output Fall Time tf VCE = 2V, Ic = 2mA, RL = 100Ω 6 18 µs 0.1 0.2 pF Note 1 : Measured with input leads shorted together and output leads shorted together, R.H 40% to 60% 3 30/4/2013 V DC93168 ISOCOM COMPONENTS IS1100 Fig 1 Forward Current vs Ambient Temperature Fig 2 Collector Power Dissipation vs TA Fig 3 Forward Current vs Forward Voltage Fig 4 Normalized Collector Current vs Forward Current Fig 5 Collector Current vs Collector-Emitter Voltage (1) Fig 6 Collector Current vs Collector-Emitter Volatge (2) 4 30/4/2013 DC93168 ISOCOM COMPONENTS IS1100 Fig 7 Normalized Collector Current vs Ambient Temperature Fig 8 Normalized CTR vs Ambient Temperature Fig 9 Collector-Emitter Voltage vs Ambient Temperature Fig 10 Switching Time vs Load Resistance Switching Time Test Circuit 5 30/4/2013 DC93168 ISOCOM COMPONENTS IS1100 ORDER INFORMATION IS1100 After PN PN Description Packing quantity None IS1100 Surface Mount Tape & Reel 1000 pcs per reel Any CTR Grade IS1101, IS1102, IS1103, IS1104, IS1105, IS1106, IS1107, IS1108, IS1109, Surface Mount Tape & Reel 1000 pcs per reel Device Marking THP_ IYWW THP_ I Y WW 6 30/4/2013 denotes Device Part Number where “_” denoted CTR Grade denotes Isocom denotes 1 digit Year code denotes 2 digit Week code DC93168 ISOCOM COMPONENTS IS1100 PACKAGE DIMENSIONS (mm) Recommended Solder Pad Layout (mm) 7 30/4/2013 DC93168 ISOCOM COMPONENTS IS1100 IR REFLOW SOLDERING TEMPERATURE PROFILE (One Time Reflow Soldering is Recommended) 260 °C Peak 255 °C (30s max) 1-3 °C/s Max TEMP (°C) 217°C 200°C 60s – 140s 150°C 70s – 170s Preheat 1-3 °C/s Max 25°C TIME (s) 8 30/4/2013 DC93168 ISOCOM COMPONENTS IS1100 Tape and Reel Packaging 9 30/4/2013 DC93168 ISOCOM COMPONENTS IS1100 Notes: - Isocom is continually improving the quality, reliability, function or design and Isocom reserves the right to make changes without further notices. - The products shown in this publication are designed for the general use in electronic applications such as office automation equipment, communications devices, audio/visual equipment, electrical application and instrumentation. - For equipment/application where high reliability or safety is required, such as space applications, nuclear power control equipment, medical equipment, etc., please contact our sales representatives. - When requiring a device for any ”specific” application, please contact our sales for advice. - The contents described herein are subject to change without prior notice. - Do not immerse device body in solder paste. 10 30/4/2013 DC93168