FM5817 THRU FM5819 SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER VOLTAGE RANGE 20 to 40 Volts CURRENT 1.0 Ampere FEATURES * * * * * Ideal for surface mounted applications Low leakage current Metallurgically bonded construction Mounting position: Any Weight: 0.057 gram DO-214AC MECHANICAL DATA * Epoxy: Device has UL flammability classification 94V-O 0.067 (1.70 ) 0.051 (1.29 ) 0.110 ( 2.79 ) 0.086 ( 2.18 ) 0.180 ( 4.57 ) 0.160 ( 4.06 ) 0.012 ( 0.305 ) 0.006 ( 0.152 ) 0.091 ( 2.31 ) 0.067 ( 1.70 ) 0.059 ( 1.50 ) 0.035 ( 0.89 ) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. 0.008 ( 0.203 ) 0.004 ( 0.102 ) Single phase, half wave, 60 Hz, resistive or inductive load. 0.209 ( 5.31 ) 0.185 ( 4.70 ) For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) MAXIMUM RATINGS (@ TA=25 OC unless otherwise noted) SYMBOL FM5817 FM5818 FM5819 UNITS Maximum Recurrent Peak Reverse Voltage VRRM 20 30 40 Volts Maximum RMS Voltage VRMS 14 21 28 Volts VDC 20 30 40 Volts RATINGS Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at T A = 90 OC IO 1.0 Amps I FSM 25 Amps RqJA 88 RqJL 28 Typical Junction Capacitance (Note 1) CJ 110 pF Operating Temperature Range TJ 150 0 C T STG -55 to + 150 0 C Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Thermal Resistance (Note 3) Storage Temperature Range 0 C/W ELECTRICAL CHARACTERISTICS (@TA=25 C unless otherwise noted) O SYMBOL FM5817 FM5818 FM5819 UNITS Maximum Instantaneous Forward Voltage at 1.0A DC VF .45 .55 .60 Volts Maximum Instantaneous Forward Voltage at 3.1A DC VF .75 .875 .90 CHARACTERISTICS Maximum Average Reverse Current @T A = 25 o C at Rated DC Blocking Voltage @T A = 100o C NOTES : 1. Measured at 1 MHz and applied reverse voltage of 4.0 volts. 2. “Fully ROHS compliant”, “100% Sn plating (Pb-free)”. 3. Thermal Resistance : Mounted on PCB. 4. Also available in DO-214AA (SMB). IR Volts 0.2 mAmps 10 mAmps 2006-11 AVERAGE FORWARD CURRENT, (A) 1.00 0.75 0.50 0.25 0 Single Half Wave 60HZ Resistive or Inductive Load 0 25 50 75 100 125 150 175 INSTANTANEOUS FORWARD CURRENT, (A) RATING AND CHARACTERISTICS CURVES ( FM5817 THRU FM5819 ) 20 10 FM5817 FM5818 FM5819 1.0 0.1 T J = 25 OC Pulse Width = 300mS 1% Duty Cycle 0.1 0.3 O 10 TA = 125 OC 1.0 TA = 75 OC 0.1 TA = 25 C O 0.01 0.001 0 20 40 60 80 100 0.7 0.9 1.1 1.3 1.5 1.9 2.1 120 TJ = 25 OC 200 100 80 60 40 20 10 140 0.1 0.4 PERCENT RATED PEAK REVERSE VOLTAGE, (%) 1.0 4 40 FIG.4 TYPICAL JUNCTION CAPACITANCE 50 8.3mS Single Half Sine-Wave JEDEC Method 40 30 20 10 2 10 REVERSE VOLTAGE, (V) FIG.3 TYPICAL REVERSE CHARACTERISTICS 0 1 1.7 FIG.2 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 400 CT, TOTAL CAPACITANCE, (pF) 100 0.5 INSTANTANEOUS FORWARD VOLTAGE, (V) FIG.1 TYPICAL FORWARD CURRENT DERATING CURVE PEAK FORWARD SURGE CURRENT, (A) INSTANTANEOUS REVERSE CURRENT, (mA) AMBIENT TEMPERATURE, ( C) 4 6 8 10 20 40 80 100 NUMBER OF CYCLES AT 60Hz FIG.5 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 80 Mounting Pad Layout 0.094 MAX. (2.38 MAX.) 0.060MIN. ( 1.52 MIN.) 0.052 MAX. (1.32 MAX.) 0.220 (5.58) REF Dimensions in inches and (millimeters) DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Rectron: FM5817-W FM5818-W FM5819-W FM5817-W-S-NT FM5818-W-S-NT-W FM5819-W-S-NT-W FM5817 FM5818 FM5819