APM4463K P-Channel Enhancement Mode MOSFET Pin Description Features • -20V/-10A , D RDS(ON)=12mΩ(typ.) @ VGS=-4.5V RDS(ON)=18mΩ(typ.) @ VGS=-2.5V • • • Reliable and Rugged • Lead Free Available (RoHS Compliant) D D D S Super High Dense Cell Design S S G Top View of SOP − 8 SOP-8 Package (1, 2, 3) S S S Applications (4) G • Power Management in Notebook Computer, Portable Equipment and Battery Powered Systems DD DD (5, 6, 7, 8) P-Channel MOSFET Ordering and Marking Information Package Code K : SO P-8 Operating Junction Tem p. Range C : -55 to 150°C Handling Code TR : Tape & Reel Lead Free Code L : Lead Free Device Blank : O riginal Device APM 4463 Lead Free Code Handling Code Tem p. Range Package Code APM 4463 K : APM 4463 XXXXX XXXXX - Date Code Note: ANPEC lead-free products contain molding compounds/die attach materials and 100% matte in plate termination finish; which are fully compliant with RoHS and compatible with both SnPb and lead-free soldiering operations. ANPEC lead-free products meet or exceed the lead-free requirements of IPC/JEDEC J STD-020C for MSL classification at lead-free peak reflow temperature. ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and advise customers to obtain the latest version of relevant information to verify before placing orders. Copyright ANPEC Electronics Corp. Rev. B.1 - Mar., 2005 1 www.anpec.com.tw APM4463K Absolute Maximum Ratings Symbol (TA = 25°C unless otherwise noted) Parameter Rating VDSS Drain-Source Voltage -20 VGSS Gate-Source Voltage ±16 ID* Continuous Drain Current IDM* IS* Pulsed Drain Current Diode Continuous Forward Current TJ Maximum Junction Temperature TSTG Storage Temperature Range PD* Maximum Power Dissipation RθJA* Unit V -10 VGS=-4.5V A -40 A -2.3 150 °C -55 to 150 TA=25°C TA=100°C 2 W 0.8 Thermal Resistance-Junction to Ambient °C/W 62.5 Note: 2 *Surface Mounted on 1in pad area, t ≤ 10sec. Electrical Characteristics Symbol Parameter Static Characteristics BVDSS Drain-Source Breakdown Voltage IDSS Zero Gate Voltage Drain Current VGS(th) IGSS RDS(ON) a VSD a (TA = 25°C unless otherwise noted) Test Condition VGS=0V, IDS=-250µA Typ. Gate Leakage Current VGS=±16V, VDS=0V Max. -20 -1 -30 -0.7 Unit V TJ=85°C VDS=VGS, IDS=-250µA Diode Forward Voltage Min. VDS=-16V, VGS=0V Gate Threshold Voltage Drain-Source On-state Resistance APM4463K -0.9 µA -1.5 V ±100 nA VGS=-4.5V, IDS=-10A 12 17 VGS=-2.5V, IDS=-8A 18 25 ISD=-2.3A, VGS=0V -0.7 -1.3 mΩ V b Dynamic Characteristics RG Gate Resistance Ciss Input Capacitance Coss Output Capacitance Crss Reverse Transfer Capacitance td(ON) Turn-on Delay Time Tr Turn-on Rise Time td(OFF) Turn-off Delay Time Tf VGS=0V,VDS=0V,F=1MHz VGS=0V, VDS=-15V, Frequency=1.0MHz VDD=-10V, RL=10Ω, IDS=-1A,VGEN=-4.5V, RG=6Ω Turn-off Fall Time Copyright ANPEC Electronics Corp. Rev. B.1 - Mar., 2005 2 Ω 5 4540 pF 1100 810 40 60 40 60 170 270 90 150 ns www.anpec.com.tw APM4463K Electrical Characteristics (Cont.) Symbol Parameter Gate Charge Characteristics Qg Total Gate Charge (TA = 25°C unless otherwise noted) Test Condition APM4463K Min. Typ. Max. 37 45 Unit b Qgs Gate-Source Charge Qgd Gate-Drain Charge VDS=-10V, VGS=-4.5V, IDS=-10A 6.5 nC 2.5 Notes: a : Pulse test ; pulse width≤300µs, duty cycle≤2%. b : Guaranteed by design, not subject to production testing. Copyright ANPEC Electronics Corp. Rev. B.1 - Mar., 2005 3 www.anpec.com.tw APM4463K Typical Characteristics Drain Current Power Dissipation 2.5 12 10 -ID - Drain Current (A) Ptot - Power (W) 2.0 1.5 1.0 0.5 8 6 4 2 o o 0.0 TA=25 C 0 20 40 60 0 80 100 120 140 160 40 60 80 100 120 140 160 Safe Operation Area Thermal Transient Impedance Normalized Transient Thermal Resistance it im n) L (o ds R -ID - Drain Current (A) 20 Tj - Junction Temperature (°C) 10ms 1 100ms 1s 0.1 DC o TA=25 C 0.01 0.01 0 Tj - Junction Temperature (°C) 100 10 TA=25 C,VG=-4.5V 0.1 1 10 1 Duty = 0.5 0.2 0.1 0.1 0.05 0.02 0.01 0.01 2 Mounted on 1in pad o RθJA : 62.5 C/W Single Pulse 1E-3 1E-4 100 -VDS - Drain - Source Voltage (V) Copyright ANPEC Electronics Corp. Rev. B.1 - Mar., 2005 2 1E-3 0.01 0.1 1 10 30 Square Wave Pulse Duration (sec) 4 www.anpec.com.tw APM4463K Typical Characteristics (Cont.) Output Characteristics Drain-Source On Resistance 30 40 VGS= -3, -4, -5, -6, -7, -8, -9, -10V 27 RDS(ON) - On - Resistance (mΩ) 36 -ID - Drain Current (A) 32 28 24 20 -2V 16 12 8 4 0 VGS= -2.5V 21 18 15 VGS= -4.5V 12 9 6 3 0 1 2 3 4 0 5 10 15 20 25 30 35 Transfer Characteristics Gate Threshold Voltage 35 1.50 Normalized Threshold Voltage 1.75 25 20 o Tj=125 C 10 o Tj=25 C o Tj=-55 C 5 0 0.0 5 -ID - Drain Current (A) 40 15 0 -VDS - Drain - Source Voltage (V) 30 -ID - Drain Current (A) 24 0.5 1.0 1.5 2.0 2.5 3.0 3.5 -VGS - Gate - Source Voltage (V) Copyright ANPEC Electronics Corp. Rev. B.1 - Mar., 2005 IDS= -250µΑ 1.25 1.00 0.75 0.50 0.25 0.00 -50 -25 4.0 40 0 25 50 75 100 125 150 Tj - Junction Temperature (°C) 5 www.anpec.com.tw APM4463K Typical Characteristics (Cont.) Drain-Source On Resistance Source-Drain Diode Forward 1.8 40 VGS = -4.5V IDS = -10A 10 o 1.4 -IS - Source Current (A) Normalized On Resistance 1.6 1.2 1.0 0.8 Tj=150 C 1 o Tj=25 C 0.1 0.6 o RON@Tj=25 C: 12mΩ 0.4 -50 -25 0 25 50 75 0.01 0.2 100 125 150 0.8 1.0 1.2 -VSD - Source - Drain Voltage (V) Capacitance Gate Charge 5 Frequency=1MHz VDS= -10V 7000 -VGS - Gate-source Voltage (V) ID= -10A 6000 C - Capacitance (pF) 0.6 Tj - Junction Temperature (°C) 8000 5000 Ciss 4000 3000 2000 Coss 1000 Crss 0 0.4 4 3 2 1 0 0 4 8 12 16 20 6 12 18 24 30 36 42 QG - Gate Charge (nC) -VDS - Drain - Source Voltage (V) Copyright ANPEC Electronics Corp. Rev. B.1 - Mar., 2005 0 6 www.anpec.com.tw APM4463K Packaging Information E e1 0.015X45 SOP-8 pin ( Reference JEDEC Registration MS-012) H e2 D A1 1 L 0.004max. Dim A Mi ll im et er s Inche s A Min. 1. 35 Max . 1. 75 Min. 0. 053 Max . 0. 069 A1 D E 0. 10 4. 80 3. 80 0. 25 5. 00 4. 00 0. 004 0. 189 0. 150 0. 010 0. 197 0. 157 H L e1 e2 5. 80 0. 40 0. 33 6. 20 1. 27 0. 51 0. 228 0. 016 0. 013 0. 244 0. 050 0. 020 φ 1 Copyright ANPEC Electronics Corp. Rev. B.1 - Mar., 2005 1. 27B S C 0. 50B S C 8° 8° 7 www.anpec.com.tw APM4463K Physical Specifications Terminal Material Lead Solderability Solder-Plated Copper (Solder Material : 90/10 or 63/37 SnPb), 100%Sn Meets EIA Specification RSI86-91, ANSI/J-STD-002 Category 3. Reflow Condition (IR/Convection or VPR Reflow) tp TP C ritical Zone T L to T P T e m p e ra tu re R am p-up TL tL T sm ax T sm in R am p-down ts Preheat 25 t 25 °C to Peak T im e Classification Reflow Profiles Profile Feature Average ramp-up rate (TL to TP) Preheat - Temperature Min (Tsmin) - Temperature Max (Tsmax) - Time (min to max) (ts) Time maintained above: - Temperature (TL) - Time (tL) Peak/Classificatioon Temperature (Tp) Time within 5°C of actual Peak Temperature (tp) Ramp-down Rate Sn-Pb Eutectic Assembly Pb-Free Assembly 3°C/second max. 3°C/second max. 100°C 150°C 60-120 seconds 150°C 200°C 60-180 seconds 183°C 60-150 seconds 217°C 60-150 seconds See table 1 See table 2 10-30 seconds 20-40 seconds 6°C/second max. 6°C/second max. 6 minutes max. 8 minutes max. Time 25°C to Peak Temperature Notes: All temperatures refer to topside of the package .Measured on the body surface. Copyright ANPEC Electronics Corp. Rev. B.1 - Mar., 2005 8 www.anpec.com.tw APM4463K Classification Reflow Profiles(Cont.) Table 1. SnPb Entectic Process – Package Peak Reflow Tem peratures 3 3 Package Thickness Volum e m m Volum e m m <350 ≥350 <2.5 m m 240 +0/-5°C 225 +0/-5°C ≥2.5 m m 225 +0/-5°C 225 +0/-5°C Table 2. Pb-free Process – Package Classification Reflow Tem peratures 3 3 3 Package Thickness Volum e mm Volum e mm Volum e mm <350 350-2000 >2000 <1.6 m m 260 +0°C* 260 +0°C* 260 +0°C* 1.6 m m – 2.5 m m 260 +0°C* 250 +0°C* 245 +0°C* ≥2.5 m m 250 +0°C* 245 +0°C* 245 +0°C* *Tolerance: The device m anufacturer/supplier shall assure process com patibility up to and including the stated classification tem perature (this m eans Peak reflow tem perature +0°C. For exam ple 260°C+0°C) at the rated MSL level. Reliability Test Program Test item SOLDERABILITY HOLT PCT TST Method MIL-STD-883D-2003 MIL-STD 883D-1005.7 JESD-22-B, A102 MIL-STD 883D-1011.9 Description 245°C,5 SEC 1000 Hrs Bias @ 125°C 168 Hrs, 100% RH, 121°C -65°C ~ 150°C, 200 Cycles Carrier Tape & Reel Dimensions t E P Po D P1 Bo F W Ao Copyright ANPEC Electronics Corp. Rev. B.1 - Mar., 2005 D1 9 Ko www.anpec.com.tw APM4463K Carrier Tape & Reel Dimensions(Cont.) T2 J C A B T1 Application A 330±1 SOP-8 F 5.5 ± 0.1 B 62 ± 1.5 C 12.75 + 0.1 5 J 2 + 0.5 D D1 Po 1.55±0.1 1.55+ 0.25 4.0 ± 0.1 T1 12.4 +0.2 T2 2± 0.2 W 12 + 0.3 - 0.1 P1 2.0 ± 0.1 Ao 6.4 ± 0.1 Bo 5.2± 0.1 Carrier Width 12 E 1.75± 0.1 Ko t 2.1± 0.1 0.3±0.013 (mm) Cover Tape Dimensions Application SOP- 8 P 8± 0.1 Cover Tape Width 9.3 Devices Per Reel 2500 Customer Service Anpec Electronics Corp. Head Office : 5F, No. 2 Li-Hsin Road, SBIP, Hsin-Chu, Taiwan, R.O.C. Tel : 886-3-5642000 Fax : 886-3-5642050 Taipei Branch : 7F, No. 137, Lane 235, Pac Chiao Rd., Hsin Tien City, Taipei Hsien, Taiwan, R. O. C. Tel : 886-2-89191368 Fax : 886-2-89191369 Copyright ANPEC Electronics Corp. Rev. B.1 - Mar., 2005 10 www.anpec.com.tw