Panasonic ECA1AM103 Radial lead type Datasheet

Aluminum Electrolytic Capacitors (Radial Lead Type)
Radial Lead Type
Series : M Type : A
Features
● Endurance
: 85 °C 2000 h
than series SU
● RoHS compliant
● Smaller
Specifications
Category temperature range
–40 °C to + 85 °C
–25 °C to +85 °C
Rated voltage range
6.3 V.DC to 100 V.DC
160 V.DC to 450 V.DC
Capacitance range
2.2 µF to 22000 µF
1 µF to 470 µF
Capacitance tolerance
±20 % (120 Hz/+20 °C)
I < 0.01 CV or 3 (µA) After 2 minutes
(Whichever is greater)
Leakage current
Dissipation factor (tan d)
I < 0.06 CV +10 (µA) After 2 minutes
Please see the attached characteristics list
After applying rated working voltage for 2000 hours at +85°C±2 °C, when the capacitors are
restored to 20 °C, capacitors shall meet the following limits.
Endurance
Capacitance change Within ±20 % of the initial value
< 150 % of the initial limit
tan d
DC leakage current
Within the initial limit
After storage for 1000 hours at +85 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment)
Shelf life
Frequency correction factor for ripple current
Frequency (Hz)
50, 60
120
1k
10 k to
Correction factor
0.70
1.00
1.30
1.70
fd±0.05
Dimensions
Sleeve
Pressure relief
06.3 <
< 08
010<
+
L✽
14 min.
0D+0.5
3 min.
F±0.5
–
0D+0.5
✽ L < 16 : L±1.0
L > 20 : L±2.0
(Unit : mm)
0D
5
6.3
8
10
12.5
16
18
0d
0.5
0.5
0.6
0.6
0.6
0.8
0.8
F
2.0
2.5
3.5
5.0
5.0
7.5
7.5
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
04
Mar. 2016
Aluminum Electrolytic Capacitors (Radial Lead Type)
Characteristics list
Endurance : 85 °C 2000 h
Case size (mm)
Rated Cap.
voltage (±20 %)
(V.DC) (µF)
16
25
Min. Packaging Q'ty
Lead space
Lead
dia.
0d
Part No.
Taping Taping
Straight
✽B
✽i
Straight
Taping
leads
(pcs)
(pcs)
5
11
0.5
2.0
5.0
2.5
ECA0JM221( )
200
2000
470
6.3
11.2
380
0.28
0.5
2.5
5.0
2.5
ECA0JM471( )
200
2000
8
11.5
580
0.28
0.6
3.5
5.0
ECA0JM102( )
200
1000
2200
10
16
890
0.30
0.6
5.0
5.0
ECA0JM222( )
200
500
3300
10
20
1020
0.32
0.6
5.0
5.0
ECA0JM332( )
200
500
4700
12.5
20
1170
0.34
0.6
5.0
5.0
ECA0JM472( )
200
500
6800
12.5
25
1270
0.38
0.6
5.0
5.0
ECA0JM682( )
200
500
7.5
ECA0JM103( )
100
250
ECA0JM153
100
10000
16
25
1450
0.46
0.8
7.5
15000
16
31.5
1700
0.56
0.8
7.5
22000
18
330
10
L
Lead length (mm)
220
1000
6.3
0D
Specification
Ripple
current tan d
(120 Hz) (120 Hz)
(+85 °C) (+20 °C)
(mA r.m.s.)
240
0.28
6.3
ECA0JM223
35.5
1900
0.70
0.8
7.5
11.2
330
0.24
0.5
2.5
5.0
2.5
ECA1AM331( )
50
200
2000
1000
10
12.5
630
0.24
0.6
5.0
5.0
ECA1AM102( )
200
500
2200
10
20
920
0.26
0.6
5.0
5.0
ECA1AM222( )
200
500
3300
12.5
20
1090
0.28
0.6
5.0
5.0
ECA1AM332( )
200
500
4700
12.5
25
1200
0.30
0.6
5.0
5.0
ECA1AM472( )
200
500
6800
16
25
1400
0.34
0.8
7.5
7.5
ECA1AM682( )
100
250
10000
16
31.5
1600
0.42
0.8
7.5
ECA1AM103
100
15000
18
35.5
1850
0.52
0.8
7.5
ECA1AM153
50
10
5
11
30
0.20
0.5
2.0
5.0
2.5
ECA1CM100( )
200
2000
22
5
11
75
0.20
0.5
2.0
5.0
2.5
ECA1CM220( )
200
2000
33
5
11
110
0.20
0.5
2.0
5.0
2.5
ECA1CM330( )
200
2000
47
5
11
130
0.20
0.5
2.0
5.0
2.5
ECA1CM470( )
200
2000
100
5
11
180
0.20
0.5
2.0
5.0
2.5
ECA1CM101( )
200
2000
220
6.3
11.2
280
0.20
0.5
2.5
5.0
2.5
ECA1CM221( )
200
2000
470
8
11.5
440
0.20
0.6
3.5
5.0
ECA1CM471( )
200
1000
1000
10
16
680
0.20
0.6
5.0
5.0
ECA1CM102( )
200
500
2200
12.5
20
1000
0.22
0.6
5.0
5.0
ECA1CM222( )
200
500
3300
12.5
25
1200
0.24
0.6
5.0
5.0
ECA1CM332( )
200
500
4700
16
25
1360
0.26
0.8
7.5
7.5
ECA1CM472( )
100
250
6800
16
31.5
1600
0.30
0.8
7.5
ECA1CM682
100
10000
18
35.5
1800
0.38
0.8
7.5
ECA1CM103
50
100
6.3
11.2
180
0.16
0.5
2.5
5.0
ECA1EM101( )
200
2000
330
8
11.5
390
0.16
0.6
3.5
5.0
ECA1EM331( )
200
1000
2.5
470
10
12.5
480
0.16
0.6
5.0
5.0
ECA1EM471( )
200
500
1000
10
20
850
0.16
0.6
5.0
5.0
ECA1EM102( )
200
500
2200
12.5
25
1200
0.18
0.6
5.0
5.0
ECA1EM222( )
200
500
3300
16
25
1300
0.20
0.8
7.5
7.5
ECA1EM332( )
100
250
4700
16
31.5
1500
0.22
0.8
7.5
ECA1EM472
100
6800
18
35.5
1750
0.26
0.8
7.5
ECA1EM682
50
· When requesting taped product, please put the letter “B” or “i” between the “( )”. Lead wire pitch ✽B=5 mm, 7.5 mm, i=2.5 mm.
· Please refer to the page of “Taping dimensions”.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
04
Mar. 2016
Aluminum Electrolytic Capacitors (Radial Lead Type)
Characteristics list
Endurance : 85 °C 2000 h
Case size (mm)
Rated Cap.
voltage (±20 %)
(V.DC) (µF)
47
100
35
50
63
0D
L
5
11
6.3
11.2
Specification
Ripple
current tan d
(120 Hz) (120 Hz)
(+85 °C) (+20 °C)
(mA r.m.s.)
130
0.14
Lead length (mm)
Min. Packaging Q'ty
Lead space
Lead
dia.
0d
Part No.
Taping Taping
Straight
✽B
✽i
Straight
Taping
leads
(pcs)
(pcs)
0.5
2.0
5.0
2.5
ECA1VM470( )
200
2000
210
0.14
0.5
2.5
5.0
2.5
ECA1VM101( )
200
2000
220
8
11.5
350
0.14
0.6
3.5
5.0
ECA1VM221( )
200
1000
330
10
12.5
440
0.14
0.6
5.0
5.0
ECA1VM331( )
200
500
470
10
16
550
0.14
0.6
5.0
5.0
ECA1VM471( )
200
500
1000
12.5
20
900
0.14
0.6
5.0
5.0
ECA1VM102( )
200
500
2200
16
25
1250
0.16
0.8
7.5
7.5
ECA1VM222( )
100
250
3300
16
31.5
1400
0.18
0.8
7.5
ECA1VM332
100
4700
18
35.5
1600
0.20
0.8
7.5
ECA1VM472
50
2.2
5
11
20
0.12
0.5
2.0
5.0
2.5
ECA1HM2R2( )
200
2000
3.3
5
11
35
0.12
0.5
2.0
5.0
2.5
ECA1HM3R3( )
200
2000
4.7
5
11
45
0.12
0.5
2.0
5.0
2.5
ECA1HM4R7( )
200
2000
10
5
11
65
0.12
0.5
2.0
5.0
2.5
ECA1HM100( )
200
2000
22
5
11
100
0.12
0.5
2.0
5.0
2.5
ECA1HM220( )
200
2000
33
5
11
110
0.12
0.5
2.0
5.0
2.5
ECA1HM330( )
200
2000
47
6.3
11.2
130
0.12
0.5
2.5
5.0
2.5
ECA1HM470( )
200
2000
100
8
11.5
250
0.12
0.6
3.5
5.0
ECA1HM101( )
200
1000
220
10
12.5
400
0.12
0.6
5.0
5.0
ECA1HM221( )
200
500
330
10
16
500
0.12
0.6
5.0
5.0
ECA1HM331( )
200
500
470
10
20
650
0.12
0.6
5.0
5.0
ECA1HM471( )
200
500
5.0
ECA1HM102( )
200
500
ECA1HM222
100
1000
12.5
25
1050
0.12
0.6
5.0
2200
16
31.5
1300
0.14
0.8
7.5
3300
18
35.5
1500
0.16
0.8
7.5
10
5
11
70
0.11
0.5
2.0
ECA1HM332
5.0
2.5
ECA1JM100( )
50
200
2000
22
5
11
105
0.11
0.5
2.0
5.0
2.5
ECA1JM220( )
200
2000
33
6.3
11.2
130
0.11
0.5
2.5
5.0
2.5
ECA1JM330( )
200
2000
47
2.5
6.3
11.2
160
0.11
0.5
2.5
5.0
ECA1JM470( )
200
2000
100
8
11.5
270
0.11
0.6
3.5
5.0
ECA1JM101( )
200
1000
220
10
16
450
0.11
0.6
5.0
5.0
ECA1JM221( )
200
500
330
10
20
550
0.11
0.6
5.0
5.0
ECA1JM331( )
200
500
470
12.5
20
750
0.11
0.6
5.0
5.0
ECA1JM471( )
200
500
7.5
ECA1JM102( )
100
250
1000
16
25
1100
0.11
0.8
7.5
2200
18
35.5
1400
0.13
0.8
7.5
ECA1JM222
50
· When requesting taped product, please put the letter “B” or “i” between the “( )”. Lead wire pitch ✽B=5 mm, 7.5 mm, i=2.5 mm.
· Please refer to the page of “Taping dimensions”.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
04
Mar. 2016
Aluminum Electrolytic Capacitors (Radial Lead Type)
Characteristics list
Endurance : 85 °C 2000 h
Case size (mm)
Rated Cap.
voltage (±20 %)
(V.DC) (µF)
2.2
5
11
5
11
40
Min. Packaging Q'ty
Lead space
Lead
dia.
0d
Part No.
Taping Taping
Straight
✽B
✽i
Straight
Taping
leads
(pcs)
(pcs)
0.5
2.0
5.0
2.5
ECA2AM2R2( )
200
2000
0.5
2.0
5.0
2.5
ECA2AM3R3( )
200
2000
5
11
50
0.10
0.5
2.0
5.0
2.5
ECA2AM4R7( )
200
2000
5
11
70
0.10
0.5
2.0
5.0
2.5
ECA2AM100( )
200
2000
22
6.3
11.2
115
0.10
0.5
2.5
5.0
2.5
ECA2AM220( )
200
2000
33
8
11.5
145
0.10
0.6
3.5
5.0
ECA2AM330( )
200
1000
47
8
11.5
180
0.10
0.6
3.5
5.0
ECA2AM470( )
200
1000
100
10
16
350
0.10
0.6
5.0
5.0
ECA2AM101( )
200
500
220
12.5
20
550
0.10
0.6
5.0
5.0
ECA2AM221( )
200
500
330
12.5
25
700
0.10
0.6
5.0
5.0
ECA2AM331( )
200
500
470
16
25
900
0.10
0.8
7.5
7.5
ECA2AM471( )
100
250
1000
18
35.5
1300
0.10
0.8
7.5
11.2
36
0.16
0.5
2.5
5.0
2.5
ECA2CM010( )
200
2000
6.3
ECA2AM102
50
2.2
6.3
11.2
53
0.16
0.5
2.5
5.0
2.5
ECA2CM2R2( )
200
2000
3.3
6.3
11.2
66
0.16
0.5
2.5
5.0
2.5
ECA2CM3R3( )
200
2000
4.7
6.3
11.2
78
0.16
0.5
2.5
5.0
2.5
ECA2CM4R7( )
200
2000
10
10
12.5
105
0.16
0.6
5.0
5.0
ECA2CM100( )
200
500
22
10
16
175
0.16
0.6
5.0
5.0
ECA2CM220( )
200
500
33
10
20
235
0.16
0.6
5.0
5.0
ECA2CM330( )
200
500
47
12.5
20
320
0.16
0.6
5.0
5.0
ECA2CM470( )
200
500
5.0
500
100
12.5
25
515
0.16
0.6
5.0
ECA2CM101( )
200
220
16
31.5
830
0.16
0.8
7.5
ECA2CM221
100
330
18
31.5
1090
0.16
0.8
7.5
ECA2CM331
50
470
18
40
1440
0.16
0.8
7.5
ECA2CM471
50
1
6.3
11.2
34
0.18
0.5
2.5
5.0
2.5
ECA2DM010( )
200
2000
2.2
6.3
11.2
50
0.18
0.5
2.5
5.0
2.5
ECA2DM2R2( )
200
2000
3.3
6.3
11.2
62
0.18
0.5
2.5
5.0
2.5
ECA2DM3R3( )
200
2000
4.7
8
11.5
86
0.18
0.6
3.5
5.0
ECA2DM4R7( )
200
1000
10
12.5
100
0.18
0.6
5.0
5.0
ECA2DM100( )
200
500
10
200
0.10
Lead length (mm)
10
1
160
L
3.3
4.7
100
0D
Specification
Ripple
current tan d
(120 Hz) (120 Hz)
(+85 °C) (+20 °C)
(mA r.m.s.)
30
0.10
22
10
20
180
0.18
0.6
5.0
5.0
ECA2DM220( )
200
500
33
10
20
220
0.18
0.6
5.0
5.0
ECA2DM330( )
200
500
12.5
20
300
0.18
0.6
5.0
5.0
ECA2DM470( )
200
500
100
16
25
475
0.18
0.8
7.5
7.5
ECA2DM101( )
100
250
220
18
31.5
835
0.18
0.8
7.5
ECA2DM221
50
330
18
40
1140
0.18
0.8
7.5
ECA2DM331
50
47
· When requesting taped product, please put the letter “B” or “i” between the “( )”. Lead wire pitch ✽B=5 mm, 7.5 mm, i=2.5 mm.
· Please refer to the page of “Taping dimensions”.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
04
Mar. 2016
Aluminum Electrolytic Capacitors (Radial Lead Type)
Characteristics list
Endurance : 85 °C 2000 h
Case size (mm)
Rated Cap.
voltage (±20 %)
(V.DC) (µF)
250
0D
L
1
6.3
11.2
2.2
6.3
11.2
3.3
8
4.7
8
Lead space
Lead
dia.
0d
Part No.
Taping Taping
Straight
✽B
✽i
Straight
Taping
leads
(pcs)
(pcs)
0.5
2.5
5.0
2.5
ECA2EM010( )
200
2000
50
0.18
0.5
2.5
5.0
2.5
ECA2EM2R2( )
200
2000
11.5
72
0.18
0.6
3.5
5.0
ECA2EM3R3( )
200
1000
11.5
86
0.18
0.6
3.5
5.0
ECA2EM4R7( )
200
1000
110
0.18
0.6
5.0
5.0
ECA2EM100( )
200
500
22
10
20
180
0.18
0.6
5.0
5.0
ECA2EM220( )
200
500
33
12.5
20
250
0.18
0.6
5.0
5.0
ECA2EM330( )
200
500
16
5.0
ECA2EM470( )
200
500
ECA2EM101
100
12.5
25
330
0.18
0.6
5.0
100
16
31.5
530
0.18
0.8
7.5
220
18
40
930
0.18
0.8
7.5
32
0.20
0.5
2.5
5.0
6.3
11.2
ECA2EM221
2.5
ECA2VM010( )
50
200
2000
2.2
8
11.5
55
0.20
0.6
3.5
5.0
ECA2VM2R2( )
200
1000
3.3
8
11.5
60
0.20
0.6
3.5
5.0
ECA2VM3R3( )
200
1000
10
12.5
65
0.20
0.6
5.0
5.0
ECA2VM4R7( )
200
500
10
10
20
115
0.20
0.6
5.0
5.0
ECA2VM100( )
200
500
22
12.5
20
195
0.20
0.6
5.0
5.0
ECA2VM220( )
200
500
4.7
33
16
25
300
0.20
0.8
7.5
7.5
ECA2VM330( )
100
250
47
16
25
325
0.20
0.8
7.5
7.5
ECA2VM470( )
100
250
100
18
ECA2VM101
31.5
535
0.20
0.8
7.5
6.3
11.2
32
0.20
0.5
2.5
2.2
8
11.5
50
0.20
0.6
3.5
5.0
3.3
10
12.5
54
0.20
0.6
5.0
5.0
1
4.7
450
Min. Packaging Q'ty
10
1
400
Lead length (mm)
10
47
350
Specification
Ripple
current tan d
(120 Hz) (120 Hz)
(+85 °C) (+20 °C)
(mA r.m.s.)
34
0.18
10
5.0
2.5
ECA2GM010( )
50
200
2000
ECA2GM2R2( )
200
1000
ECA2GM3R3( )
200
500
10
16
72
0.20
0.6
5.0
5.0
ECA2GM4R7( )
200
500
10
20
115
0.20
0.6
5.0
5.0
ECA2GM100( )
200
500
22
12.5
25
215
0.20
0.6
5.0
5.0
ECA2GM220( )
200
500
33
16
25
275
0.20
0.8
7.5
7.5
ECA2GM330( )
100
250
47
16
31.5
350
0.20
0.8
7.5
ECA2GM470
100
100
18
40
600
0.20
0.8
7.5
ECA2GM101
50
1
8
11.5
37
0.20
0.6
3.5
5.0
ECA2WM010( )
200
1000
2.2
10
12.5
44
0.20
0.6
5.0
5.0
ECA2WM2R2( )
200
500
3.3
10
16
60
0.20
0.6
5.0
5.0
ECA2WM3R3( )
200
500
4.7
10
20
79
0.20
0.6
5.0
5.0
ECA2WM4R7( )
200
500
12.5
20
130
0.20
0.6
5.0
5.0
ECA2WM100( )
200
500
7.5
ECA2WM220( )
100
250
ECA2WM330
100
10
22
16
25
210
0.20
0.8
7.5
33
16
31.5
285
0.20
0.8
7.5
· When requesting taped product, please put the letter “B” or “i” between the “( )”. Lead wire pitch ✽B=5 mm, 7.5 mm, i=2.5 mm.
· Please refer to the page of “Taping dimensions”.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
04
Mar. 2016