RoHS Multilayer Chip Inductors MLC20 0.043±0.008 0.126±0.008 Dimensions: (1.09±0.20) (3.20±0.20) Inches (mm) 0.063±0.008 (1.60±0.20) 0.043±0.008 (1.09±0.20) 0.047 (1.19) 0.078 (1.98) Allied Part Number Inductance Tolerance (µh) (%) Q Min. Test Freq. (MHz) SRF Min. (MHz) DCR Max. (Ω) IDC Max. (mA) MLC20-R047M-RC .047 20 20 50 320 0.15 300 MLC20-R056M-RC .056 20 20 50 280 0.25 300 MLC20-R068M-RC MLC20-R082M-RC .068 .082 20 20 20 20 50 50 280 250 0.25 0.25 300 300 MLC20-R10M-RC .10 20 25 25 235 0.25 250 MLC20-R12M-RC .12 20 25 25 220 0.30 250 MLC20-R15M-RC .15 20 25 25 200 0.30 250 MLC20-R18M-RC .18 20 25 25 185 0.40 250 MLC20-R22M-RC .22 20 25 25 170 0.40 250 MLC20-R27M-RC .27 20 25 25 150 0.50 250 MLC20-R33M-RC .33 20 25 25 145 0.60 250 MLC20-R39M-RC .39 20 25 25 135 0.50 200 MLC20-R47M-RC MLC20-R56M-RC .47 .56 20 20 25 25 25 25 125 115 0.60 0.70 200 150 MLC20-R68M-RC .68 20 25 25 105 0.80 150 MLC20-R82M-RC .82 20 25 25 100 0.90 100 MLC20-1R0K-RC 1.0 10 45 10 75 0.40 100 MLC20-1R2K-RC MLC20-1R5K-RC MLC20-1R8K-RC MLC20-2R2K-RC MLC20-2R7K-RC MLC20-3R3K-RC MLC20-3R9K-RC MLC20-4R7K-RC MLC20-5R6K-RC MLC20-6R8K-RC MLC20-8R2K-RC MLC20-100K-RC MLC20-120K-RC MLC20-150K-RC MLC20-180K-RC MLC20-220K-RC MLC20-270K-RC 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 45 45 45 45 45 45 45 45 45 45 45 45 45 35 35 35 35 10 10 10 10 10 10 10 10 4 4 4 2 2 1 1 1 1 65 60 55 50 45 41 38 35 32 29 26 24 22 19 18 16 14 0.50 0.50 0.50 0.60 0.60 0.70 0.80 0.90 0.70 0.80 0.90 1.00 1.00 0.70 0.75 0.90 0.90 100 80 70 60 60 60 50 50 25 25 25 25 15 5 5 5 5 Available in tighter tolerances. All specifications subject to change without notice. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL Revised 11/26/13 0.054 (1.37) Electrical Q vs. Frequency Characteristics: Measured on Impedance Analyzer HPA4195A. I n d u c t a n c e v s . Te m p e r a t u r e Characteristics: Measured on LCR Meter HP4285A. Impedance vs. Frequency Characteristics: Measured on Impedance Analyzer HP4195A. Inductance vs. DC Current Characteristics: Measured on LCR Meter HP42585A. Tolerance: For 20% use M, 10% use K and 5% use J as part number suffix. Mechanical Solderability: 90% terminal coverage. Preheat: 150ºC for 60 sec. Solder: H63A. Solder Temp.: 260 ± 5°C. Flux: rosin. Immersion time 10 ± 1 sec. Environmental Thermal Shock: Inductance shall be within ± 5% of of initial value. Q shall be within ± 30% of initial value within temp. range of -40°C to +125ºC for 30 min. Each for >100 cycles. Humidity Resistance: Same results as above. Temp.: 40°C. Humidity: 95% RH. Time: 1000 hrs. High Temp. Resistance: Same results as above. Temp: 85°C. Time: 1000 hrs. Low Temp Resitance: Same results as above. Temp.: 40°C. Time: 1000 hrs. Operating Temp.: -40° C to +125ºC Storage Temp.: -40° C to +85° C. Physical Packaging: 3000 pieces per 7 inch reel. www.alliedcomponents.com