PMBR20H150CT \ MBR20H150FCT \ MBR20H150DC ULTRA LOW IR SCHOTTKY BARRIER RECTIFIERS Voltage 150 V 20 A Current TO-220AB Features Plastic package has Underwriters Laboratory Flammability Classification 94V-O. Flame Retardant Epoxy Molding Compound. Low power loss, high efficiency. High current capability ITO-220AB High junction temperature capability Lead free in compliance with EU RoHS 2011/65/EU directive Green molding compound as per IEC61249 Std. . (Halogen Free) Mechanical Data Case: TO-220AB, ITO-220AB, TO-263 package TO-263 Terminals: solder plated, solderable per MIL-STD-750,Method 2026 TO-220AB Weight: 0.067 ounces, 1.89 grams. ITO-220AB Weight: 0.056 ounces, 1.6 grams. TO-263 Weight: 0.051 ounces, 1.46 grams. Marking: Part number 150V TO-220AB MBR20H150CT ITO-220AB MBR20H150FCT TO-263 MBR20H150DC o Maximum Ratings And Electrical Characteristics (TA=25 C unless otherwise noted) PARAMETER SYMBOL 150V UNIT Maximum repetitive peak reverse voltage VRRM 150 V Maximum rms voltage VRMS 105 V VR 150 V Maximum dc blocking voltage Maximum average forward rectified per device current per diode Peak forward surge current : 8.3ms single half sinewave superimposed on rated load per diode Maximum forward voltage at 10A per diode Maximum dc reverse current at rated dc blocking voltage IF(AV) o TJ =125 C 200 A VF 0.85 V 0.55 A 1 mA IR TO-220AB(Note 1) Typical thermal resistance TO-263(Note 1) 3 RθJC ITO-220AB(Note 1) Operating junction temperature range Storage temperature range A 10 IFSM o TJ =25 C 20 3 o C/W 7 TJ -55 to +175 o TSTG -55 to +175 o C C Note : 1. Semi-infinite heatsink October 14,2016-REV.01 Page 1 12 10 8 6 4 2 Per Diode 0 0 25 50 75 100 125 150 175 TC, Case Temperature (°C) CJ, Junction Capacitance (pF) IF, Forward Current (A) PMBR20H150CT \ MBR20H150FCT \ MBR20H150DC Fig.1 Forward Current Derating Curve TJ = 125°C 10 1 TJ = 75°C 0.1 Per Diode 0.01 TJ = 25°C 0.001 40 50 60 70 80 90 100 IF, Forward Current (A) IR, Reverse Current (mA) 100 30 10 Per Diode 1 1 100 VR, Reverse Bias Voltage (V) 10 TJ = 150°C TJ = 125°C TJ = 75°C 1 Per Diode TJ = 25°C 0.1 0 Percent of Rated Peak Reverse Voltage (%) Fig.3 Typical Reverse Characteristics October 14,2016-REV.01 10 100 TJ = 150°C 20 100 Fig.2 Typical Junction Capacitance 1000 10 1000 0.2 0.4 0.6 0.8 1 VF, Forward Voltage (V) Fig.4 Typical Forward Characteristics Page 2 PMBR20H150CT \ MBR20H150FCT \ MBR20H150DC MOUNTING PAD LAYOUT ORDER INFORMATION ˙Packing information T/R – 0.8K per 13" plastic Reel October 14,2016-REV.01 Page 3 PMBR20H150CT \ MBR20H150FCT \ MBR20H150DC 0.189(4.8) 0.137(4.4) 0.409(10.4) 0.387(9.80) 0.418(10.6) 0.378(9.60) 0.357(9.1) 0.335(8.5) 0.055(1.4) 0.047(1.2) 0.110(2.8) 0.236(6.0) 0.197(5.0) 0.026(0.7) 0.011(0.3) 0.055(1.4) 0.039(1.0) 0.035(0.9)MAX. 0.108(2.75) 0.092(2.35) 0.108(2.75) 0.092(2.35) October 14,2016-REV.01 Page 4 PMBR20H150CT \ MBR20H150FCT \ MBR20H150DC Part No_packing code_Version MBR20H150CT_T0_00001 MBR20H150DC_R2_00001 MBR20H150FCT_T0_00001 For example : RB500V-40_R2_00001 ˙Serial number ˙ ˙Version code means HF Part No. ˙Packing size code means 13" ˙Packing type means T/R Packing Code XX Version Code XXXXX st nd st nd th Packing type 1 Code Packing size code 2 Code HF or RoHS 1 Code 2 ~5 Code Tape and Ammunition Box (T/B) A N/A 0 HF 0 serial number Tape and Reel (T/R) R 7" 1 RoHS 1 serial number Bulk Packing (B/P) B 13" 2 Tube Packing (T/P) T 26mm X Tape and Reel (Right Oriented) (TRR) S 52mm Y Tape and Reel (Left Oriented) (TRL) L PANASERT T/B CATHODE UP (PBCU) U FORMING F PANASERT T/B CATHODE DOWN (PBCD) D October 14,2016-REV.01 Page 5 PMBR20H150CT \ MBR20H150FCT \ MBR20H150DC Disclaimer ● Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. ● Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. ● Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. ● Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. ● Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. ● The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. ● Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. October 14,2016-REV.01 Page 6