SURFACE MOUNT DISPLAY ATTENTION P/N: ACDA56-41PBWA/A-F01 BLUE OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES PRELIMINARY SPEC Features Description 0.56INCH DIGIT HEIGHT. The Blue source color devices are made with InGaN on LOW CURRENT OPERATION. SiC Light Emitting Diode. EXCELLENT CHARACTER APPEARANCE. I.C. COMPATIBLE. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or MECHANICALLY RUGGED. anti-electrostatic glove when handling the LEDs. GRAY FACE,WHITE SEGMENT. All devices, equipment and machinery must be electrically PACKAGE:200PCS/ REEL. grounded. MOISTURE SENSITIVITY LEVEL : LEVEL 4. RoHS COMPLIANT Package Dimensions & Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted. 2. Specifications are subject to change without notice. 3.The gap between the reflector and PCB shall not exceed 0.25mm. SPEC NO: DSAG0243 REV NO: V.2 DATE: MAR/22/2006 PAGE: 1 OF 5 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.L.LI ERP:1352000337 Selection Guide Part No. Dice ACDA56-41PBWA/A-F01 Iv (ucd) [1] @ 10mA Lens Type BLUE (InGaN) WHITE DIFFUSED Min. Typ. 1900 9000 Description Common Anode, Rt. Hand Decimal. Note: 1.Luminous Intensity/ Luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Blue λD[1] Dominant Wavelength ∆λ1/2 Typ. Max. Units Test Conditions 468 nm IF=20mA Blue 470 nm IF=20mA Spectral Line Half-width Blue 21 nm IF=20mA C Capacitance Blue 100 pF VF=0V;f=1MHz VF[2] Forward Voltage Blue 3.3 3.8 V IF=20mA IR Reverse Current Blue 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm 2.Forward Voltage: +/-0.1V Absolute Maximum Ratings at TA=25°C Parameter Blue Units Power dissipation 114 mW DC Forward Current 30 mA Peak Forward Current [1] 100 mA 5 V Reverse Voltage Operating/Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAG0243 REV NO: V.2 DATE: MAR/22/2006 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.L.LI ERP:1352000337 Blue ACDA56-41PBWA/A-F01 SPEC NO: DSAG0243 REV NO: V.2 DATE: MAR/22/2006 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.L.LI ERP:1352000337 ACDA56-41PBWA/A-F01 Recommended Soldering Pattern (Units : mm) Reel Dimension Tape Specifications (Units : mm) SPEC NO: DSAG0243 REV NO: V.2 DATE: MAR/22/2006 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.L.LI ERP:1352000337 PACKING & LABEL SPECIFICATIONS ACDA56-41PBWA/A-F01 SPEC NO: DSAG0243 REV NO: V.2 DATE: MAR/22/2006 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.L.LI ERP:1352000337