PRODUCT DATASHEET ANGELA series last update 3/11/2016 DETAILS Product Number FCN13706_ANGELA-M Family ANGELA Type RefPack Color metal Diameter 119,5 mm Height 79,31 mm Style round Optic Material Holder Material Fastening Status production ready ROHS Comliant Yes Date Updated 3/11/2016 OPTICAL PROPERTIES Viewing Light Effi- LED Angle Beam ciency cd/lm Connector VERO18 19 deg Medium 85 % 3.000 LEDiL: LEDiL VERO13 16 deg Medium 87 % 3.600 LEDiL: LEDiL V15 Gen6 17 deg Medium 92 % 3.900 Bender Wirth: 456 Typ L2 V10 Gen7 sim: 15 Medium sim: 90 % sim: 7.030 Bender Wirth: 434 Typ L1 CLU720/721 14 deg Medium 83 % 4.000 Bender Wirth: 433 Typ L1 CLL03x/CLU03x 17 deg Medium 88 % 3.400 Bender Wirth: 433 Typ L1 CLU700/701 12 deg Medium 83 % 5.200 Bender Wirth: 434 Typ L1 CLL02x/CLU02x (LES10) 14 deg Medium 84 % 4.300 Bender Wirth: 434 Typ L1 CXA/B 1816 & CXA/B 1820 & CXA 1850 15 deg Medium 83 % 3.800 Bender Wirth: 437 Typ L1 CXA/B 15xx 13 deg Medium 84 % 4.700 Bender Wirth: 441 Typ L1 LUXEON CoB 1202/1203 13 deg Medium 84 % 4.500 Bender Wirth: 438 Typ L1 CXM-14 sim: 17 Medium sim: 83 % sim: 3.400 Bender Wirth: 433 Typ L1 CXM-9 sim: 14 Medium sim: 84 % sim: 4.300 Bender Wirth: 434 Typ L1 COB L-Type (LES 9) 13 deg Medium 85 % 4.500 Bender Wirth: 438 Typ L1 COB J-Type 17 deg Medium 83 % 3.500 Bender Wirth: 463 Typ L2 COB L-Type (LES 11) 15 deg Medium 83 % 3.900 Bender Wirth: 438 Typ L1 Soleriq P9 13 deg Medium 88 % 4.200 Bender Wirth: 461 Typ L1 Soleriq P13 16 deg Medium 88 % 3.600 Bender Wirth: 437 Typ L1 Soleriq S13 15 deg Medium 83 % 3.800 Bender Wirth: 437 Typ L1 LC026B/LC040B 19 deg Medium 83 % 3.000 Bender Wirth: 450 Typ L2 ZC12/18 sim: 17 Medium sim: 83 % sim: 3.400 Bender Wirth: 433 Typ L1 ZC4/6 sim: 14 Medium sim: 84 % sim: 4.300 Bender Wirth: 434 Typ L1 SLE G5 LES11 14 deg Medium 84 % 4.400 Bender Wirth: 434 Typ L1 May 23rd 2017 5:47 Copyright Ledil Oy - Subject to change without prior notice - Page 1/1 Ledil Oy Salorankatu 10 24240 SALO, Finland http://www.ledil.com email: [email protected] FAX: +358-2-733 8001 Relative intensity of FCN13706_ANGELA-M_(V15) 100% 75% 50% 25% 0% 60 50 40 30 20 10 0 -10 -20 -30 -40 -50 -60 A B C D E F G H A 4 4 5 50 1 . 19 3 35 3 2 2 WITH LEDIL LUXEON S SOCKETS WITH TYCO SOCKET WITH LEDIL BRIDGELUX VERO SOCKETS 13-18 Tolerances if not otherwise shown According to DIN ISO 2768-1 Linear measures: Up to 30mm class M, otherwise class C. According to DIN ISO 2768-2 Form and position: class L THIRD ANGLE PROJECTION: 1 This drawing is the property of LEDiL Oy. It may not be reproduced, copied or communicated without a written agreement with LEDiL Oy." Ledil Oy Salorankatu 10 FIN 24240 SALO Finland DRAWING TITLE DATA SHEET ANGELA SIZE G 1 PART NUMBER A3 SCALE H DIMESION A 80.5 mm 80.5 mm 79.5 mm 1:1 WEIGHT - B SHEET A 1/1 NOTE: The typical divergence will be changed by different color, chip size and chip position tolerance. The typical total divergence is the full angle measured where the luminous intensity is half of the peak value. GENERAL INFORMATION - Product series especially designed & optimized for series of LEDs. - Special care taken to make light distribution as uniform as possible. Note! Due to use of high power COB's with this product, special attention to proper thermal design is highly recommended. LEDiL has no liability for direct, indirect or consecutive damages arising from the LEDiL products being used outside of the recommended temperature range.