MEGA BRIGHT LED BTL-51YGC-XX-X Package Dimension Product Features Ultra Bright Yellow Green Color High Light Output 5mm Diameter Circular Package Water Clear Lens Highly Reliable IC Compatible Leads without Stand Off Applications Automotive Front Panel Indicator Special Lighting General Purpose LEDs Tolerance: ± inch Unit: ± 0.01 0.25 mm Optical and Electrical Characteristics at Ta=25℃ Parameter Symbol Minimum Typical Maximum Units Conditions Luminous Intensity Iv － 350 － mcd IF = 20mA Viewing Angle 2θ½ － 15 － deg IF = 20mA λD 565 572 575 nm IF = 20mA VF － 2.2 2.8 V IF = 20mA IR 0 － 10 µA VR=5V Dominant Wavelength DC Forward Voltage DC Reverse Current (Note 1) (Note 2) Notes: 1. Light intensity measures the light sensing response standard using chromatic meter. Refer to the CIE eye-response curve set by International Lighting committee. Tolerance of minimum and maximum intensity = ± 15% 2. Wavelength range can be selected from the bin selection table. Tolerance of minimum and maximum = ± 2nm 3. These products are sensitive to static electricity and care must be fully taken when handling products Page 1 of 3 DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com MEGA BRIGHT LED BTL-51YGC-XX-X Absolute Maximum Ratings at Ta=25℃ Symbol Parameter Max. Unit 100 mW PD Power Rating VR Reverse Voltage (IR=10µA) 5 V IF Continuous Forward Current 30 mA IFP Peak Forward Current (0.1 duty cycle @ 1kHz) 100 mA Topr Operating Temperature Range –35 ~ + 80 ℃ Tstg Storage Temperature Range –40 ~ + 100 ℃ Lead Soldering Temperature [1.6mm (0.063inch) from body] 260℃ - max 5 seconds Wavelength and Brightness Selection BTL-51YGC-XX-X Wavelength Bin Selection Bin G16 G17 XX Yellow Green (nm) 565~570 570~575 565~575 Brightness Bin Selection Bin I J K Range(mcd) 240~310 310~400 400~520 Packaging Options Standard: 1000 pc bulk pack Optional: Tape and Reel (Please specify when order) Page 2 of 3 DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com MEGA BRIGHT LED BTL-51YGC-XX-X Typical Electro-Optical Characteristics Curves at Ta=25℃ BT-Rev. 1.0a Specifications are subject to change without notice. Copyright © 2003 Brilliance Technologies Co., Ltd. All rights reserved. Page 3 of 3 DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com