Revised May 2002 MM74C14 Hex Schmitt Trigger General Description Features The MM74C14 Hex Schmitt Trigger is a monolithic complementary MOS (CMOS) integrated circuit constructed with N- and P-channel enhancement transistors. The positive and negative going threshold voltages VT+ and VT−, show low variation with respect to temperature (typ. 0.0005V/°C at VCC = 10V), and hysteresis, VT+ − VT− ≥ 0.2 VCC is guaranteed. ■ Wide supply voltage range: 3.0V to 15V ■ High noise immunity: 0.70 VCC (typ.) ■ Low power: TTL compatibility: 0.4 VCC (typ.) ■ Hysteresis: 0.2 VCC guaranteed 0.4 VCC (typ.): 0.2 VCC guaranteed All inputs are protected from damage due to static discharge by diode clamps to VCC and GND. Ordering Code: Order Number Package Number Package Description MM74C14M M14A 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow MM74C14N N14A 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Devices also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering code. Connection Diagram Top View © 2002 Fairchild Semiconductor Corporation DS005879 www.fairchildsemi.com MM74C14 Hex Schmitt Trigger October 1987 MM74C14 Absolute Maximum Ratings(Note 1) Voltage at Any Pin −0.3Vto VCC + 0.3V Operating Temperature Range −55°C to +125 °C Storage Temperature Range −65°C to +150 °C Power Dissipation Dual-In-Line 700 mW Small Outline 500mW Operating VCC Range Note 1: “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. Except for “Operating Temperature Range” they are not meant to imply that the devices should be operated at these limits. The Electrical Characteristics tables provide conditions for actual device operation. 3.0V to 15V Absolute Maximum VCC 18V Lead Temperature 260 °C (Soldering, 10 seconds) DC Electrical Characteristics Min/Max limits apply across the guaranteed temperature range unless otherwise noted Symbol Parameter Conditions Min Typ Max VCC = 5V 3.0 3.6 4.3 VCC = 10V 6.0 6.8 8.6 VCC = 15V 9.0 10.0 12.9 Units CMOS TO CMOS VT+ VT− VT+ – VT− VOUT(1) Positive Going Threshold Voltage Negative Going Threshold Voltage Hysteresis Logical “1” Output Voltage VCC = 5V 0.7 1.4 2.0 VCC = 10V 1.4 3.2 4.0 VCC = 15V 2.1 5.0 6.0 VCC = 5V 1.0 2.2 3.6 VCC = 10V 2.0 3.6 7.2 VCC = 15V 3.0 5.0 10.8 VCC = 5V, IO = −10 µA 4.5 VCC = 10V, IO = −10 µA 9.0 Logical “0” Output Voltage IIN(1) Logical “1” Input Current IIN(0) Logical “0” Input Current VCC = 15V, VIN = 0V ICC Supply Current VCC = 15V, VIN = 0V/15V 0.5 VCC = 10V, IO = 10 µA 1.0 VCC = 15V, VIN = 15V 0.005 −1.0 V V V VCC = 5V, IO = 10 µA VOUT(0) V 1.0 −0.005 0.05 VCC = 5V, VIN = 2.5V (Note 2) 20 VCC = 10V, VIN = 5V (Note 2) 200 VCC = 15V, VIN = 7.5V (Note 2) 600 V µA µA 15 µA CMOS/LPTTL INTERFACE VIN(1) Logical “1” Input Voltage VCC = 5V VIN(0) Logical “0” Input Voltage VCC = 5V VOUT(1) Logical “1” Output Voltage 74C, VCC = 4.75V, IO = −360 µA VOUT(0) Logical “0” Output Voltage 74C, VCC = 4.75V, IO = 360 µA 4.3 V 0.7 2.4 V V 0.4 V OUTPUT DRIVE (see Family Characteristics Data Sheet) TA = 25°C (Short Circuit Current) ISOURCE Output Source Current VCC = 5V, VOUT = 0V −1.75 −3.3 mA VCC = 10V, VOUT = 0V −8.0 −15 mA VCC = 5V, VOUT = VCC 1.75 3.6 mA VCC = 10V, VOUT = VCC 8.0 16 mA (P-Channel) ISOURCE Output Source Current (P-Channel) ISINK Output Sink Current (N-Channel) ISINK Output Sink Current (N-Channel) Note 2: Only one of the six inputs is at ½ VCC; the others are either at VCC or GND. www.fairchildsemi.com 2 (Note 3) TA = 25°C, CL = 50 pF, unless otherwise specified Typ Max tPD0 Symbol Propagation Delay Parameter VCC = 5V Conditions Min 220 400 Units n tPD1 from Input to Output VCC = 10V 80 200 ns CIN Input Capacitance Any Input (Note 4) 5.0 pF CPD Power Dissipation Capacitance Per Gate (Note 5) 20 pF Note 3: AC Parameters are guaranteed by DC correlated testing. Note 4: Capacitance is guaranteed by periodic testing. Note 5: CPD determines the no load AC power consumption of any CMOS device. For complete explanation see Family Characteristics Application Note—AN-90. Typical Applications Low Power Oscillator Note: The equations assume t1 + t2 >> tpd0 +tpd1 3 www.fairchildsemi.com MM74C14 AC Electrical Characteristics MM74C14 Typical Performance Characteristics Typical Transfer Characteristics Guaranteed Trip Point Range Note: For more information on output drive characteristics, power dissipation, and propagation delays, see AN-90. www.fairchildsemi.com 4 MM74C14 Physical Dimensions inches (millimeters) unless otherwise noted 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow Package Number M14A 5 www.fairchildsemi.com MM74C14 Hex Schmitt Trigger Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Package Number N14A Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com www.fairchildsemi.com 6