Micro-D PCB MWDM Surface Mount Right Angle Micro-D Connectors Surface Mount Micro-D – These connectors feature .025 inch terminal spacing and an alignment strip for accurate registration. The integral mounting legs provide a ground path. A B 9 To 51 Contacts – These compact connectors are lighter and smaller than comparable thru-hole versions. C Mil Spec Reliability – Suitable for mission-critical requirements, These high performance connectors meet the requirements of MIL-DTL-83513. D Aluminum Shell Epoxy Potting TwistPin Contact E G Insulator Plastic Alignment Strip Integral Mounting Leg Flourosilicone Interfacial Seal H Pin Connector Insulator Integral Mounting Leg Socket Connector how to order surface mount PCB micro-d connectors J Series MWDM L Shell Material and Finish 1 – Cadmium 2 – Nickel 4 – Black Anodize 5 – Gold 6 – Chem Film Insulator Material Contact Layout L – LCP 9 15 21 25 31 37 51-2 30% GlassFilled Liquid Crystal Polymer M Board Mounting Threaded Insert Option Contact Type Termination Jackpost or Jackscrew Type Option P – S – SMR N – Thru-Hole N – Thru-Hole, No Insert Surface Mount P – Jackpost Right Angle M – Jackscrew, Hex Head T – Threaded Inserts T – Threaded Insert Pin Socket Jackposts for Rear Panel Mounting R1 R2 R3 R4 R5 N P Epoxy Potting Plastic Alignment Strip F K Aluminum Shell Socket Contact – – – – – .032” Panel .047” Panel .062” Panel .093” Panel .125” Panel #2-56 Insert Sample Part Number MWDM © 2006 Glenair, Inc. 2 L – 51-2 P SMR CAGE Code 06324/0CA77 P N Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-36 E-Mail: [email protected] Micro-D PCB MWDM Surface Mount Right Angle Micro-D Connectors Surface Mount MICRO-D hardware options N P A R1 Thru R5 B C D Thru-Hole Standard Jackpost Jackpost for Rear Panel Mounting No jackpost supplied Factory installed with nut and lockwasher Shipped loosely installed. Install with permanent threadlocking compund. M T T E F G H J Jackscrew, Hex Drive Threaded Insert Attached with e-ring performance specifications Current Rating 1 AMP DWV Insulation Resistance Contact Resistance Low Level Contact Resist. Magnetic Permeability Operating Temperature Shock, Vibration Mating Force 600 VAC Sea level 5000 Megohms Minimum 8 Milliohms Maximum 32 Milliohms Maximum 2 µ Maximum -55° C. to +150° C. 50 g., 20g. (10 Ounces) X (# of Contacts) © 2006 Glenair, Inc. Board Mount Threaded Insert #2-56 Thread materials and finishes Connector Shell Aluminum Alloy 6061.See Ordering Info for Plating Options Insulators Interfacial Seal Pin Contact Socket Contact PCB Terminals Hardware Encapsulant Liquid Crystal Polymer (LCP) Flourosilicone Rubber, Blue Beryllium Copper Gold over Nickel Plating Copper Alloy Gold Over Nickel Plating Gold Plated Copper Alloy, Solder Dipped 300 Series Stainless Steel Epoxy Resin Hysol EE4215 CAGE Code 06324/0CA77 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-37 E-Mail: [email protected] K L M N P Micro-D PCB MWDM Surface Mount Right Angle Micro-D Connectors A A B C B .324 (8.23) .177 (4.50) D C .094 (2.39) .008±.005 (0.20± 0.08) JACKPOST, THREADED INSERT: #2-56 UNC-2B THREADS THRU-HOLE: .096 ± .005 (2.43 ± 0.13) D F .224 (5.69) E F .492 (12.47) .581 (14.76) G .093 ± .005 (2.36 ± 0.13) .200 (5.08) TYP .025 (0.64) TYP Ø.008 ± .001 (0.20 ± 0.03) H J dimensions K L M N P A Max. Layout 9P 9S 15P 15S 21P 21S 25P 25S 31P 31S 37P 37S 51-2P 51-2S In. .785 .785 .935 .935 1.085 1.085 1.185 1.185 1.335 1.335 1.485 1.485 1.840 1.840 © 2006 Glenair, Inc. mm. 19.94 19.94 23.75 23.75 27.56 27.56 30.01 30.01 33.91 33.91 37.72 37.72 46.74 46.74 In. ±.005 .565 .565 .715 .715 .865 .865 .965 .965 1.115 1.115 1.265 1.265 1.615 1.615 B C Max. mm. ± 0.13 In. 14.35 14.35 18.16 18.16 21.97 21.97 24.51 24.51 28.32 28.32 32.13 32.13 41.02 41.02 .333 .400 .483 .551 .633 .701 .733 .801 .883 .951 1.033 1.101 1.375 1.444 D Max. mm. 8.46 10.16 12.27 14.00 16.08 17.81 18.62 20.35 22.43 24.16 26.24 27.96 34.93 36.68 CAGE Code 06324/0CA77 In. .184 .250 .184 .250 .184 .250 .184 .250 .184 .250 .184 .250 .184 .250 mm. 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 In. ±.003 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 F mm. ± 0.08 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-38 E-Mail: [email protected] Micro-D PCB MWDM Surface Mount Right Angle Micro-D Connectors smr surface mount connector pCB LAYOUTS A FRONT OF CONNECTOR FLANGE Suggested Printed Circuit Board Layout .174 (4.42) 5 9 4 8 3 7 2 6 1 D A A Socket 8 15 7 14 6 13 5 12 4 11 3 10 2 9 1 Layout 9 15 21 25 31 37 51-2 1 9 2 10 3 11 4 12 5 13 6 14 7 15 8 Pin Socket 11 21 10 20 9 19 8 18 7 17 6 16 5 15 4 14 3 13 2 12 1 In. .565 .715 .865 .965 1.115 1.265 1.615 B mm. 14.35 18.16 21.97 24.51 28.32 32.13 41.02 In. .200 .350 .500 .600 .750 .900 1.250 mm. 5.08 8.89 12.70 15.24 19.05 22.86 31.75 1 12 2 13 3 14 4 15 5 16 6 17 7 18 8 19 9 20 10 21 11 Pin Socket 25 Contacts E F G 13 25 12 24 11 23 10 22 9 21 8 20 7 19 6 18 5 17 4 16 3 15 2 14 1 H 1 14 2 15 3 16 4 17 5 18 6 19 7 20 8 21 9 22 10 23 11 24 12 25 13 J Pin Socket 31 Contacts B C .017 (0.43) Ø.093 (2.36) Pin 21 Contacts .492(12.47) .160 (4.06) 1 6 2 7 3 8 4 9 5 15 Contacts .025 (0.64) TYP .012 (0.30 Socket 9 Contacts B 16 31 15 30 14 29 13 28 12 27 11 26 10 25 9 24 8 23 7 22 6 21 5 20 4 19 3 18 2 17 1 K 1 17 2 18 3 19 4 20 5 21 6 22 7 23 8 24 9 25 10 26 11 27 12 28 13 29 14 30 15 31 16 Pin 19 37 18 36 17 35 13 16 34 15 33 14 32 13 31 12 30 11 29 10 28 9 27 8 26 7 25 6 24 5 23 4 22 3 21 2 20 1 L 1 20 2 21 3 22 4 23 5 24 6 25 7 26 8 27 9 28 10 29 11 30 12 31 13 32 14 33 15 34 16 13 35 17 36 18 37 19 M Socket 37 Contacts Pin Socket 51 Contacts 26 51 25 50 24 49 23 48 22 47 21 46 20 45 19 44 18 43 17 42 13 16 41 15 40 14 39 13 38 12 37 11 36 10 35 9 34 8 33 7 32 6 31 5 30 4 29 3 28 2 27 1 N 1 27 2 28 3 29 4 30 5 31 6 32 7 33 8 34 9 35 10 36 11 37 12 38 13 39 14 40 15 41 13 16 42 17 43 18 44 19 45 20 46 21 47 22 48 23 49 24 50 25 51 26 P Pin © 2006 Glenair, Inc. CAGE Code 06324/0CA77 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-39 E-Mail: [email protected]