EPCOS B41793A8108Q000 Aluminum electrolytic capacitor Datasheet

Aluminum electrolytic capacitors
Axial-lead and soldering star capacitors
Series/Type:
B41693, B41793
Date:
February 2012
© EPCOS AG 2012. Reproduction, publication and dissemination of this publication, enclosures hereto and the
information contained therein without EPCOS' prior express consent is prohibited.
Axial-lead and soldering star capacitors
B41693, B41793
Up to 150 °C
Applications
Excellent reliable design for automotive applications
Features
High operating temperature capability up to 150 °C
Rated voltage up to 100 V DC
Low ESR
High reliability
Outstanding parametric stability
High ripple current capability
High vibration resistance
Long useful life
Shelf life up to 15 years at storage temperatures up to 40 °C.
To ensure solderability, the capacitors should be built into the
application within one year of delivery. After a total of two
years' storage, the operating voltage must be applied for one
hour to ensure the specified leakage current.
Construction
Charge/discharge-proof, polar
Aluminum case with insulating sleeve
Negative pole connected to case
Terminals
Axial leads, welded to ensure perfect electrical contact
Also available with soldering stars
Taping and Packing
Axial-lead capacitors will be delivered in pallet package.
Capacitors with d × l ≤ 16 × 30 mm are also available taped
on reel.
Soldering star capacitors are packed in cardboard.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 2 of 17
B41693, B41793
Up to 150 °C
Specifications and characteristics in brief
Rated voltage VR
Surge voltage VS
Rated capacitance CR
Capacitance tolerance
25 ... 100 V DC
1.15 VR
100 ... 4000 µF
10/+30% Q
Leakage current Ileak
(5 min, 20 °C)
Self-inductance ESL1)
Diameter d (mm)
12
Terminals
Length l (mm)
Approx. ESL (nH)
axial
25
> 1000 h
> 5000 h
> 15000 h
> 200000 h
Voltage endurance test
125 °C; VR
2000 h
18
20/21
22
30
21
24
29
34
39
33
38
45
50
6
25
30
6
7
8
10
39
9
11
13
14
49
Useful life
150 °C; VR; 0.5 IAC,R
125 °C; VR; IAC, R
85 °C; VR; IAC, max
40 °C; VR; 2.1 IAC, R
16
29
49
soldering star
14
38
Requirements:
∆C/C ≤ ±30% of initial value
ESR ≤ 3 times initial specified limit
Ileak
≤ initial specified limit
Post test requirements:
∆C/C ≤ ±10% of initial value
ESR ≤ 1.3% of initial specified limit
Ileak
≤ initial specified limit
Vibration resistance test To IEC 60068-2-6, test Fc:
Frequency range 10 Hz ... 2 kHz, displacement amplitude max.
1.5 mm, acceleration max. 20 g, duration 3 × 2 h.
Capacitor mounted by its wire leads at a distance of (6 ±1) mm from
the case and additionally clamped by the case.
IEC climatic category
To IEC 60068-1:
55/125/56 (55 °C/+125 °C/56 days damp heat test)
Detail specification
Sectional specification
Similar to CECC 30301-802
IEC 60384-4
1) If optimum circuit design is used, the values are lower by 30%.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 3 of 17
B41693, B41793
Up to 150 °C
B41693, Axial-lead capacitors
Dimensional drawing
Dimensions, weights and packing units
d×l
mm
12 × 30
14 × 25
14 × 30
16 × 30
16 × 39
18 × 30
18 × 39
20 × 29
21 × 39
21 × 49
dmax × Imax
mm
12.5 × 30.5
14.5 × 25.5
14.5 × 30.5
16.5 × 30.5
16.5 × 40
18.5 × 30.5
18.5 × 40
20.5 × 29.5
21.5 × 40
21.5 × 50
Please read Cautions and warnings and
Important notes at the end of this document.
Approx. weight
g
5.1
5.7
6.8
8.9
11.7
11.1
14.7
13.5
20.0
25.0
Page 4 of 17
Packing units (pcs.)
Pallet
Reel
288
450
200
350
200
350
180
250
180
160
160
140
140
110
B41693, B41793
Up to 150 °C
B41793, Soldering star capacitors
Dimensional drawings
Mounting holes d = 12 mm ... 14 mm
Mounting holes d = 16 mm ... 21 mm
Dimensions, weights and packing units
d×l
mm
12 × 30
14 × 25
14 × 30
16 × 30
16 × 39
18 × 30
18 × 39
21 × 39
21 × 49
dmax × Imax
mm
13.5 × 32
15.5 × 27
15.5 × 32
17.5 × 32
17.5 × 41.5
19.5 × 32
19.5 × 41.5
22.5 × 41.5
22.5 × 51.5
Please read Cautions and warnings and
Important notes at the end of this document.
c ±0.1
mm
12.5
14.5
14.5
16.5
16.5
18.5
18.5
21.5
21.5
e ±0.1
mm
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.5
3.5
Page 5 of 17
Approx. weight
g
5.4
6.1
7.2
9.4
12.2
11.8
15.4
21.0
26.0
Packing units
pcs.
480
480
480
300
200
300
200
324
264
B41693, B41793
Up to 150 °C
Overview of available types
VR (V DC)
25
40
63
75
100
12 × 30
12 × 30
12 × 30
Case dimensions d × l (mm)
CR (µF)
100
14 × 30
150
14 × 30
220
330
470
14 × 25
12 × 30
16 × 30
14 × 30
16 × 39
16 × 30
18 × 39
20 × 29
18 × 39
20 × 29
20 × 29
560
680
1000
16 × 30
16 × 30
1200
1500
16 × 39
1800
20 × 29
2000
18 × 39
16 × 30
18 × 39
21 × 39
21 × 39
16 × 39
18 × 30
21 × 39
21 × 49
21 × 49
20 × 29
21 × 49
18 × 39
2200
21 × 39
2700
21 × 49
3000
21 × 39
4000
21 × 49
Please read Cautions and warnings and
Important notes at the end of this document.
Page 6 of 17
B41693, B41793
Up to 150 °C
Case dimensions and ordering codes
VR
V DC
25
40
63
75
100
CR
100 Hz
20 °C
µF
470
1000
1500
1800
2000
3000
4000
330
470
680
1000
1000 ∇
1200
1500
2200
2700
100
220
330
470
560
680
1000
1200
100
220
470
470 ∇
680
1000
100
150
220
470
470
680
1000
Case
dimensions
d×l
mm
14 × 25
16 × 30
16 × 39
20 × 29
18 × 39
21 × 39
21 × 49
12 × 30
14 × 30
16 × 30
16 × 39
18 × 30
20 × 29
18 × 39
21 × 39
21 × 49
12 × 30
14 × 30
16 × 30
16 × 39
20 × 29
18 × 39
21 × 39
21 × 49
12 × 30
16 × 30
18 × 39
20 × 29
21 × 39
21 × 49
12 × 30
14 × 30
16 × 30
18 × 39
20 × 29
21 × 39
21 × 49
Ordering code
Axial pallet
Ordering code
Axial reel
B41693A5477Q007
B41693A5108Q007
B41693A5158Q007
B41693A5188Q007
B41693A5208Q007
B41693A5308Q007
B41693A5408Q007
B41693A7337Q007
B41693A7477Q007
B41693A7687Q007
B41693B7108Q007
B41693A7108Q007
B41693A7128Q007
B41693A7158Q007
B41693A7228Q007
B41693A7278Q007
B41693A8107Q007
B41693A8227Q007
B41693A8337Q007
B41693A8477Q007
B41693A8567Q007
B41693A8687Q007
B41693A8108Q007
B41693A8128Q007
B41693A0107Q007
B41693A0227Q007
B41693A0477Q007
B41693B0477Q007
B41693A0687Q007
B41693A0108Q007
B41693B9107Q007
B41693B9157Q007
B41693A9227Q007
B41693A9477Q007
B41693B9477Q007
B41693A9687Q007
B41693A9108Q007
B41693A5477Q009 B41793A5477Q000
B41693A5108Q009 B41793A5108Q000
B41793A5158Q000
B41793A5208Q000
B41793A5308Q000
B41793A5408Q000
B41693A7337Q009 B41793A7337Q000
B41693A7477Q009 B41793A7477Q000
B41693A7687Q009 B41793A7687Q000
B41793B7108Q000
B41793A7108Q000
B41793A7158Q000
B41793A7228Q000
B41793A7278Q000
B41693A8107Q009 B41793A8107Q000
B41693A8227Q009 B41793A8227Q000
B41693A8337Q009 B41793A8337Q000
B41793A8477Q000
B41793A8687Q000
B41793A8108Q000
B41793A8128Q000
B41693A0107Q009 B41793A0107Q000
B41693A0227Q009 B41793A0227Q000
B41793A0477Q000
B41793A0687Q000
B41793A0108Q000
B41693B9107Q009 B41793B9107Q000
B41693B9157Q009 B41793B9157Q000
B41693A9227Q009 B41793A9227Q000
B41793A9477Q000
∇ Variant with different case dimensions
Please read Cautions and warnings and
Important notes at the end of this document.
Ordering code
Soldering star
Page 7 of 17
B41793A9687Q000
B41793A9108Q000
B41693, B41793
Up to 150 °C
Technical data
CR
100 Hz
20 °C
µF
ESRtyp
100 Hz
20 °C
mΩ
VR = 25 V DC
470
160
1000
80
1500
55
1800
45
2000
45
3000
27
4000
20
VR = 40 V DC
330
200
470
140
680
100
1000
65
1000 ∇
70
1200
52
1500
48
2200
30
2700
24
VR = 63 V DC
100
430
220
200
330
130
470
90
560
72
680
67
1000
43
1200
35
VR = 75 V DC
100
380
220
180
470
85
470 ∇
80
680
55
1000
40
ESRmax
100 Hz
20 °C
mΩ
ESRmax
100 Hz
40 °C
mΩ
ESRmax
10 kHz
20 °C
mΩ
Zmax
100 kHz
20 °C
mΩ
IAC,max
10 kHz
85 °C
A
IAC,max
10 kHz
105 °C
A
IAC,max
10 kHz
125 °C
A
IAC,R
10 kHz
125 °C
A
IAC,max
10 kHz
150 °C
A
260
130
85
70
70
43
33
1900
900
600
600
500
450
320
140
75
50
40
42
25
20
102
55
39
30
26
21
16
4.2
6.2
8.6
9.5
9.2
13.7
17.3
3.6
5.3
7.4
8.2
7.9
11.8
14.9
2.8
4.2
5.8
6.4
6.2
9.2
11.7
1.95
2.9
4.0
4.45
4.3
6.4
8.0
1.0
1.4
2.0
2.2
4.1
3.2
4.0
320
220
160
110
115
85
75
50
40
2500
1700
1200
700
700
600
500
450
330
150
110
80
57
65
45
45
26
21
140
102
75
55
62
44
43
26
21
4.3
5.2
6.1
8.4
6.6
9.3
9.2
13.6
17.1
3.7
4.5
5.2
7.2
5.7
8.0
7.9
11.7
14.7
2.9
3.5
4.1
5.7
4.5
6.3
6.2
9.2
11.5
2.0
2.45
2.85
3.9
3.1
4.35
4.3
6.3
7.9
1.0
1.2
1.4
1.9
1.5
2.2
2.1
6.1
3.9
700
320
220
150
120
110
70
58
3300
1700
1200
900
630
550
440
380
230
110
80
55
45
45
27
22
215
102
75
52
44
44
27
22
3.7
5.3
6.2
8.5
9.5
9.2
13.7
17.1
3.2
4.6
5.3
7.3
8.1
7.9
11.8
14.7
2.5
3.6
4.2
5.7
6.4
6.2
9.2
11.5
1.7
2.5
2.9
4.0
4.4
4.3
6.4
8.0
0.85
1.25
1.45
2.0
2.2
2.1
3.2
4.0
600
300
140
135
95
65
3000
1500
700
720
500
350
200
100
50
45
30
22
190
95
48
44
30
22
4.0
6.0
9.2
9.5
13.4
17.2
3.5
5.1
7.9
8.2
11.5
14.8
2.7
4.0
6.2
6.4
9.0
11.6
1.85
2.8
4.3
4.4
6.2
8.0
0.9
1.4
2.1
2.2
3.1
4.0
∇ Variant with different case dimensions
Please read Cautions and warnings and
Important notes at the end of this document.
Page 8 of 17
B41693, B41793
Up to 150 °C
CR
100 Hz
20 °C
µF
ESRtyp
100 Hz
20 °C
mΩ
VR = 100 V DC
100
500
150
320
220
230
470
110
470
115
680
80
1000
55
ESRmax
100 Hz
20 °C
mΩ
ESRmax
100 Hz
40 °C
mΩ
ESRmax
10 kHz
20 °C
mΩ
Zmax
100 kHz
20 °C
mΩ
IAC,max
10 kHz
85 °C
A
IAC,max
10 kHz
105 °C
A
750
550
350
170
175
120
85
4000
2900
1900
900
900
670
500
320
230
160
75
78
58
44
310
225
157
73
76
56
43
2.7
3.5
4.3
8.0
7.0
9.9
13.0
2.3
3.0
3.7
6.9
6.0
8.5
11.2
∇ Variant with different case dimensions
Please read Cautions and warnings and
Important notes at the end of this document.
Page 9 of 17
IAC,max
10 kHz
125 °C
A
1.8
2.4
2.9
5.4
4.7
6.7
8.8
IAC,R
10 kHz
125 °C
A
IAC,max
10 kHz
150 °C
A
1.3
1.7
2.0
3.7
3.2
4.6
6.1
0.6
0.8
1.0
1.8
1.6
2.3
3.0
B41693, B41793
Up to 150 °C
Useful life
depending on ambient temperature TA under ripple current operating conditions at VR1)
Useful life
depending on case temperature TC under ripple current operating conditions at VR1)
1) Refer to chapter "General technical information, 5.3 Calculation of useful life" for an explanation on how to interpret the useful life
graphs.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 10 of 17
Frequency factor of permissible ripple
current IAC versus frequency f
Frequency characteristics of ESR
Typical behavior
B41693, B41793
Up to 150 °C
Cautions and warnings
Personal safety
The electrolytes used by EPCOS have not only been optimized with a view to the intended
application, but also with regard to health and environmental compatibility. They do not contain
any solvents that are detrimental to health, e.g. dimethyl formamide (DMF) or dimethyl acetamide
(DMAC).
Furthermore, part of the high-voltage electrolytes used by EPCOS are self-extinguishing. They
contain flame-retarding substances which will quickly extinguish any flame that may have been
ignited.
As far as possible, EPCOS does not use any dangerous chemicals or compounds to produce
operating electrolytes. However, in exceptional cases, such materials must be used in order to
achieve specific physical and electrical properties because no safe substitute materials are
currently known. However, the amount of dangerous materials used in our products has been
limited to an absolute minimum. Nevertheless, the following rules should be observed when
handling aluminum electrolytic capacitors:
Any escaping electrolyte should not come into contact with eyes or skin.
If electrolyte does come into contact with the skin, wash the affected parts immediately with
running water. If the eyes are affected, rinse them for 10 minutes with plenty of water. If
symptoms persist, seek medical treatment.
Avoid breathing in electrolyte vapor or mists. Workplaces and other affected areas should be
well ventilated. Clothing that has been contaminated by electrolyte must be changed and
rinsed in water.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 12 of 17
B41693, B41793
Up to 150 °C
Product safety
The table below summarizes the safety instructions that must be observed without fail. A detailed
description can be found in the relevant sections of chapter "General technical information".
Topic
Safety information
Polarity
Make sure that polar capacitors are connected
with the right polarity.
Reverse voltage
Voltages polarity classes should be prevented by
connecting a diode.
Do not exceed the upper category temperature.
Upper category
temperature
Maintenance
Mounting
position of screwterminal capacitors
Mounting of
single-ended
capacitors
Robustness of
terminals
Soldering
Make periodic inspections of the capacitors.
Before the inspection, make sure that the power
supply is turned off and carefully discharge the
electricity of the capacitors.
Do not apply any mechanical stress to the
capacitor terminals.
Do not mount the capacitor with the terminals
(safety vent) upside down.
Reference
chapter "General
technical information"
1
"Basic construction of
aluminum electrolytic
capacitors"
3.1.6
"Reverse voltage"
7.2
"Maximum permissible
operating temperature"
10
"Maintenance"
11.1.
"Mounting positions of
capacitors with screw
terminals"
The internal structure of single-ended capacitors 11.4
might be damaged if excessive force is applied to "Mounting
the lead wires.
considerations for
Avoid any compressive, tensile or flexural stress. single-ended capacitors"
Do not move the capacitor after soldering to PC
board.
Do not pick up the PC board by the soldered
capacitor.
Do not insert the capacitor on the PC board with a
hole space different to the lead space specified.
The following maximum tightening torques must
11.3
not be exceeded when connecting screw
"Mounting torques"
terminals:
M5: 2 Nm
M6: 2.5 Nm
Do not exceed the specified time or temperature 11.5
limits during soldering.
"Soldering"
Please read Cautions and warnings and
Important notes at the end of this document.
Page 13 of 17
B41693, B41793
Up to 150 °C
Topic
Soldering,
cleaning agents
Passive
flammability
Active
flammability
Safety information
Reference
chapter "General
technical information"
Do not allow halogenated hydrocarbons to come 11.6
into contact with aluminum electrolytic capacitors. "Cleaning agents"
Avoid external energy, such as fire or electricity.
8.1
"Passive flammability"
Avoid overload of the capacitors.
8.2
"Active flammability"
Breakdown strength Do not damage the insulating sleeve, especially
of insulating
when ring clips are used for mounting.
sleeves
Please read Cautions and warnings and
Important notes at the end of this document.
Page 14 of 17
Reference
chapter "Capacitors with
screw terminals"
"Screw terminals accessories"
B41693, B41793
Up to 150 °C
Symbols and terms
Symbol
English
German
C
CR
CS
CS,T
Cf
d
dmax
ESL
ESR
ESRf
Capacitance
Rated capacitance
Series capacitance
Series capacitance at temperature T
Capacitance at frequency f
Case diameter, nominal dimension
Maximum case diameter
Self-inductance
Equivalent series resistance
Equivalent series resistance at
frequency f
Equivalent series resistance at
temperature T
Frequency
Current
Alternating current (ripple current)
Root-mean-square value of alternating
current
Ripple current at frequency f
Maximum permissible ripple current
Rated ripple current
Rated ripple current for base cooling
Leakage current
Operating leakage current
Case length, nominal dimension
Maximum case length (without
terminals and mounting stud)
Resistance
Insulation resistance
Balancing resistance
Temperature
Temperature difference
Ambient temperature
Case temperature
Capacitor base temperature
Time
Period
Service life (operating hours)
Kapazität
Nennkapazität
Serienkapazität
Serienkapazität bei Temperatur T
Kapazität bei Frequenz f
Gehäusedurchmesser, Nennmaß
Maximaler Gehäusedurchmesser
Eigeninduktivität
Ersatzserienwiderstand
Ersatzserienwiderstand bei Frequenz f
ESRT
f
I
IAC
IAC,rms
IAC,f
IAC,max
IAC,R
IAC,R (B)
Ileak
Ileak,op
l
lmax
R
Rins
Rsymm
T
∆T
TA
TC
TB
t
∆t
tb
Please read Cautions and warnings and
Important notes at the end of this document.
Ersatzserienwiderstand bei Temperatur T
Frequenz
Strom
Wechselstrom
Wechselstrom, Effektivwert
Wechselstrom bei Frequenz f
Maximal zulässiger Wechselstrom
Nennwechselstrom
Nennwechselstromstrom für Bodenkühlung
Reststrom
Betriebsreststrom
Gehäuselänge, Nennmaß
Maximale Gehäuselänge (ohne Anschlüsse
und Gewindebolzen)
Widerstand
Isolationswiderstand
Symmetrierwiderstand
Temperatur
Temperaturdifferenz
Umgebungstemperatur
Gehäusetemperatur
Temperatur des Becherbodens
Zeit
Zeitraum
Brauchbarkeitsdauer (Betriebszeit)
Page 15 of 17
B41693, B41793
Up to 150 °C
Symbol
V
VF
Vop
VR
VS
XC
XL
Z
ZT
tan δ
λ
ε0
εr
ω
English
Voltage
Forming voltage
Operating voltage
Rated voltage, DC voltage
Surge voltage
Capacitive reactance
Inductive reactance
Impedance
Impedance at temperature T
Dissipation factor
Failure rate
Absolute permittivity
Relative permittivity
Angular velocity; 2 π f
German
Spannung
Formierspannung
Betriebsspannung
Nennspannung, Gleichspannung
Spitzenspannung
Kapazitiver Blindwiderstand
Induktiver Blindwiderstand
Scheinwiderstand
Scheinwiderstand bei Temperatur T
Verlustfaktor
Ausfallrate
Elektrische Feldkonstante
Dielektrizitätszahl
Kreisfrequenz; 2 π f
Note
All dimensions are given in mm.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 16 of 17
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in
which the malfunction or failure of an electronic component could endanger human life or
health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by
means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by
third parties in the event of malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order. We also
reserve the right to discontinue production and delivery of products. Consequently, we
cannot guarantee that all products named in this publication will always be available. The
aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the "General Terms of Delivery for Products and Services in the Electrical Industry" published by the German Electrical and Electronics Industry Association
(ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DeltaCap,
DigiSiMic, DSSP, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC,
PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap,
SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be
found on the Internet at www.epcos.com/trademarks.
Page 17 of 17