AD ADUM3402 Quad-channel, digital isolators, enhanced system-level esd reliability Datasheet

Quad-Channel, Digital Isolators,
Enhanced System-Level ESD Reliability
ADuM3400/ADuM3401/ADuM3402
Data Sheet
FEATURES
GENERAL DESCRIPTION
Enhanced system-level ESD performance per IEC 61000-4-x
Low power operation
5 V operation
1.4 mA per channel maximum at 0 Mbps to 2 Mbps
4.3 mA per channel maximum at 10 Mbps
34 mA per channel maximum at 90 Mbps
3 V operation
0.9 mA per channel maximum at 0 Mbps to 2 Mbps
2.4 mA per channel maximum at 10 Mbps
20 mA per channel maximum at 90 Mbps
Bidirectional communication
3 V/5 V level translation
High temperature operation: 105°C
High data rate: dc to 90 Mbps (NRZ)
Precise timing characteristics
2 ns maximum pulse width distortion
2 ns maximum channel-to-channel matching
High common-mode transient immunity: >25 kV/μs
Output enable function
16-lead SOIC wide body, RoHS-compliant package
Safety and regulatory approvals
UL recognition: 2500 V rms for 1 minute per UL 1577
CSA Component Acceptance Notice #5A
VDE Certificate of Conformity
DIN V VDE V 0884-10 (VDE V 0884-10): 2006-12
VIORM = 560 V peak
The ADuM340x1 are 4-channel digital isolators based on the
Analog Devices, Inc., iCoupler® technology. Combining high
speed CMOS and monolithic air core transformer technology,
these isolation components provide outstanding performance
characteristics superior to alternatives such as optocoupler devices.
APPLICATIONS
General-purpose multichannel isolation
SPI/data converter isolation
RS-232/RS-422/RS-485 transceivers
Industrial field bus isolation
iCoupler devices remove the design difficulties commonly
associated with optocouplers. Typical optocoupler concerns
regarding uncertain current transfer ratios, nonlinear transfer
functions, and temperature and lifetime effects are eliminated
with the simple iCoupler digital interfaces and stable performance
characteristics. The need for external drivers and other discrete
components is eliminated with these iCoupler products. Furthermore, iCoupler devices consume one-tenth to one-sixth the
power of optocouplers at comparable signal data rates.
The ADuM340x isolators provide four independent isolation
channels in a variety of channel configurations and data rates
(see the Ordering Guide). All models operate with the supply
voltage on either side ranging from 2.7 V to 5.5 V, providing
compatibility with lower voltage systems as well as enabling a
voltage translation functionality across the isolation barrier. The
ADuM340x isolators have a patented refresh feature that ensures dc
correctness in the absence of input logic transitions and during
power-up/power-down conditions.
In comparison to the ADuM340x isolators, the ADuM340x
isolators contain various circuit and layout changes to provide
increased capability relative to system-level IEC 61000-4-x testing
(ESD/burst/surge). The precise capability in these tests for either
the ADuM140x or ADuM340x products is strongly determined
by the design and layout of the user’s board or module. For more
information, see the AN-793 Application Note, ESD/Latch-Up
Considerations with iCoupler Isolation Products.
1
Protected by U.S. Patents 5,952,849; 6,873,065; 6,903,578; and 7,075,329.
VDD1 1
16 VDD2
VDD1 1
16 VDD2
VDD1 1
16 VDD2
GND1 2
15 GND2
GND1 2
15 GND2
GND1 2
15 GND2
ENCODE
DECODE
14 VOA
VIA 3
ENCODE
DECODE
14 VOA
VIA 3
ENCODE
DECODE
14 VOA
ENCODE
DECODE
13 VOB
VIB 4
ENCODE
DECODE
13 VOB
VIB 4
ENCODE
DECODE
13 VOB
VIC 5
ENCODE
DECODE
12 VOC
VOC 5
DECODE
ENCODE
12 VIC
DECODE
ENCODE
11 VID
VOD 6
DECODE
ENCODE
11 VID
10 VE2
VE1 7
ENCODE
DECODE
12 VOC
VID 6
ENCODE
DECODE
11 VOD
VOD 6
10 VE2
VE1 7
NC 7
GND1 8
9 GND2
05985-001
VIC 5
Figure 1. ADuM3400 Functional Block Diagram
Rev. C
GND1 8
9 GND2
05985-002
VIA 3
VIB 4
Figure 2. ADuM3401 Functional Block Diagram
GND1 8
10 VE2
9 GND2
05985-003
FUNCTIONAL BLOCK DIAGRAMS
Figure 3. ADuM3402 Functional Block Diagram
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2006–2014 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com
ADuM3400/ADuM3401/ADuM3402
Data Sheet
TABLE OF CONTENTS
Features .............................................................................................. 1
Absolute Maximum Ratings ......................................................... 14
Applications ....................................................................................... 1
ESD Caution................................................................................ 14
General Description ......................................................................... 1
Pin Configurations and Function Descriptions ......................... 15
Functional Block Diagrams ............................................................. 1
Typical Performance Characteristics ........................................... 18
Revision History ............................................................................... 2
Application Information ................................................................ 20
Specifications..................................................................................... 3
PC Board Layout ........................................................................ 20
Electrical Characteristics—5 V Operation................................ 3
System-Level ESD Considerations and Enhancements ........ 20
Electrical Characteristics—3 V Operation................................ 6
Propagation Delay-Related Parameters ................................... 20
Electrical Characteristics—Mixed 5 V/3 V or 3 V/5 V
Operation....................................................................................... 8
DC Correctness and Magnetic Field Immunity........................... 20
Package Characteristics ............................................................. 12
Regulatory Information ............................................................. 12
Insulation and Safety-Related Specifications .......................... 12
Power Consumption .................................................................. 21
Insulation Lifetime ..................................................................... 22
Outline Dimensions ....................................................................... 23
Ordering Guide .......................................................................... 23
DIN V VDE V 0884-10 (VDE V 0884-10) Insulation
Characteristics ............................................................................ 13
Recommended Operating Conditions .................................... 13
REVISION HISTORY
4/14—Rev. B to Rev. C
Changes to Table 5 .......................................................................... 12
2/12—Rev. A to Rev. B
Created Hyperlink for Safety and Regulatory Approvals
Entry in Features Section................................................................. 1
Change to PC Board Layout Section............................................ 20
6/07—Rev. 0 to Rev. A
Updated VDE Certification Throughout ...................................... 1
Changes to Features, General Description, Note 1, Figure 1,
Figure 2, and Figure 3 ...................................................................... 1
Changes to Regulatory Information Section .............................. 12
Changes to Table 7 and Figure 4 Caption.................................... 13
Added Table 10; Renumbered Sequentially ................................ 14
Added Insulation Lifetime Section .............................................. 22
Inserted Figure 21, Figure 22, and Figure 23 .............................. 22
Changes to Ordering Guide .......................................................... 23
3/06—Revision 0: Initial Version
Rev. C | Page 2 of 24
Data Sheet
ADuM3400/ADuM3401/ADuM3402
SPECIFICATIONS
ELECTRICAL CHARACTERISTICS—5 V OPERATION
All voltages are relative to their respective ground. 4.5 V ≤ VDD1 ≤ 5.5 V, 4.5 V ≤ VDD2 ≤ 5.5 V; all minimum/maximum specifications apply
over the entire recommended operation range, unless otherwise noted; all typical specifications are at TA = 25°C, VDD1 = VDD2 = 5 V.
Table 1.
Parameter
DC SPECIFICATIONS
Input Supply Current per Channel, Quiescent
Output Supply Current per Channel, Quiescent
ADuM3400, Total Supply Current, Four Channels1
DC to 2 Mbps
VDD1 Supply Current
VDD2 Supply Current
10 Mbps (BRW and CRW Grades Only)
VDD1 Supply Current
VDD2 Supply Current
90 Mbps (CRW Grade Only)
VDD1 Supply Current
VDD2 Supply Current
ADuM3401, Total Supply Current, Four Channels1
DC to 2 Mbps
VDD1 Supply Current
VDD2 Supply Current
10 Mbps (BRW and CRW Grades Only)
VDD1 Supply Current
VDD2 Supply Current
90 Mbps (CRW Grade Only)
VDD1 Supply Current
VDD2 Supply Current
ADuM3402, Total Supply Current, Four Channels1
DC to 2 Mbps
VDD1 or VDD2 Supply Current
10 Mbps (BRW and CRW Grades Only)
VDD1 or VDD2 Supply Current
90 Mbps (CRW Grade Only)
VDD1 or VDD2 Supply Current
For All Models
Input Currents
Logic High Input Threshold
Logic Low Input Threshold
Logic High Output Voltages
Logic Low Output Voltages
Symbol
Min
Typ
Max Unit
IDDI (Q)
IDDO (Q)
0.57
0.29
0.83 mA
0.35 mA
IDD1 (Q)
IDD2 (Q)
2.9
1.2
3.5
1.9
IDD1 (10)
IDD2 (10)
9.0
3.0
11.6 mA
5.5 mA
5 MHz logic signal freq.
5 MHz logic signal freq.
IDD1 (90)
IDD2 (90)
72
19
100
36
mA
mA
45 MHz logic signal freq.
45 MHz logic signal freq.
IDD1 (Q)
IDD2 (Q)
2.5
1.6
3.2
2.4
mA
mA
DC to 1 MHz logic signal freq.
DC to 1 MHz logic signal freq.
IDD1 (10)
IDD2 (10)
7.4
4.4
10.6 mA
6.5 mA
5 MHz logic signal freq.
5 MHz logic signal freq.
IDD1 (90)
IDD2 (90)
59
32
82
46
mA
mA
45 MHz logic signal freq.
45 MHz logic signal freq.
IDD1 (Q), IDD2 (Q)
2.0
2.8
mA
DC to 1 MHz logic signal freq.
IDD1 (10), IDD2 (10)
6.0
7.5
mA
5 MHz logic signal freq.
IDD1 (90), IDD2 (90)
51
62
mA
45 MHz logic signal freq.
µA
0 V ≤ VIA, VIB, VIC, VID ≤ VDD1 or VDD2,
0 V ≤ VE1, VE2 ≤ VDD1 or VDD2
IIA, IIB, IIC,
IID, IE1, IE2
VIH, VEH
VIL, VEL
VOAH, VOBH,
VOCH, VODH
VOAL, VOBL,
VOCL, VODL
−10
+0.01 +10
2.0
0.8
(VDD1 or VDD2) − 0.1 5.0
(VDD1 or VDD2) − 0.4 4.8
0.0
0.04
0.2
Rev. C | Page 3 of 24
0.1
0.1
0.4
mA
mA
V
V
V
V
V
V
V
Test Conditions
DC to 1 MHz logic signal freq.
DC to 1 MHz logic signal freq.
IOx = −20 µA, VIx = VIxH
IOx = −4 mA, VIx = VIxH
IOx = 20 µA, VIx = VIxL
IOx = 400 µA, VIx = VIxL
IOx = 4 mA, VIx = VIxL
ADuM3400/ADuM3401/ADuM3402
Parameter
SWITCHING SPECIFICATIONS
ADuM340xARW
Minimum Pulse Width 2
Maximum Data Rate 3
Propagation Delay 4
Pulse Width Distortion, |tPLH − tPHL|4
Propagation Delay Skew 5
Channel-to-Channel Matching 6
ADuM340xBRW
Minimum Pulse Width2
Maximum Data Rate3
Propagation Delay4
Pulse Width Distortion, |tPLH − tPHL|4
Change vs. Temperature
Propagation Delay Skew5
Channel-to-Channel Matching,
Codirectional Channels6
Channel-to-Channel Matching,
Opposing-Directional Channels6
ADuM340xCRW
Minimum Pulse Width2
Maximum Data Rate3
Propagation Delay4
Pulse Width Distortion, |tPLH − tPHL|4
Change vs. Temperature
Propagation Delay Skew5
Channel-to-Channel Matching,
Codirectional Channels6
Channel-to-Channel Matching,
Opposing-Directional Channels6
For All Models
Output Disable Propagation Delay
(High/Low-to-High Impedance)
Output Enable Propagation Delay
(High Impedance-to-High/Low)
Output Rise/Fall Time (10% to 90%)
Common-Mode Transient Immunity
at Logic High Output 7
Common-Mode Transient Immunity
at Logic Low Output7
Refresh Rate
Input Dynamic Supply Current per Channel 8
Output Dynamic Supply Current per Channel8
Symbol
Data Sheet
Min
Typ
PW
tPHL, tPLH
PWD
tPSK
tPSKCD/OD
1
50
65
PW
Max Unit
Test Conditions
1000 ns
Mbps
100 ns
40
ns
50
ns
50
ns
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
100
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
tPSK
tPSKCD
15
3
ns
Mbps
ns
ns
ps/°C
ns
ns
tPSKOD
6
ns
tPHL, tPLH
PWD
10
20
32
50
3
5
PW
tPSK
tPSKCD
11.1 ns
Mbps
32
ns
2
ns
ps/°C
10
ns
2
ns
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
tPSKOD
5
ns
CL = 15 pF, CMOS signal levels
tPHL, tPLH
PWD
90
18
8.3
120
27
0.5
3
tPHZ, tPLH
6
8
ns
CL = 15 pF, CMOS signal levels
tPZH, tPZL
6
8
ns
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
VIx = VDD1/VDD2, VCM = 1000 V,
transient magnitude = 800 V
VIx = 0 V, VCM = 1000 V,
transient magnitude = 800 V
tR/tF
|CMH|
25
2.5
35
ns
kV/µs
|CML|
25
35
kV/µs
1.2
0.20
0.05
Mbps
mA/Mbps
mA/Mbps
fr
IDDI (D)
IDDO (D)
Rev. C | Page 4 of 24
Data Sheet
ADuM3400/ADuM3401/ADuM3402
The supply current values for all four channels are combined when running at identical data rates. Output supply current values are specified with no output load
present. The supply current associated with an individual channel operating at a given data rate can be calculated as described in the Power Consumption section.
See Figure 8 through Figure 10 for information on per-channel supply current as a function of data rate for unloaded and loaded conditions. See Figure 11 through
Figure 15 for total VDD1 and VDD2 supply currents as a function of data rate for ADuM3400/ADuM3401/ADuM3402 channel configurations.
2
The minimum pulse width is the shortest pulse width at which the specified pulse width distortion is guaranteed.
3
The maximum data rate is the fastest data rate at which the specified pulse width distortion is guaranteed.
4
tPHL propagation delay is measured from the 50% level of the falling edge of the VIx signal to the 50% level of the falling edge of the VOx signal. tPLH propagation delay is
measured from the 50% level of the rising edge of the VIx signal to the 50% level of the rising edge of the VOx signal.
5
tPSK is the magnitude of the worst-case difference in tPHL or tPLH that is measured between units at the same operating temperature, supply voltages, and output load
within the recommended operating conditions.
6
Codirectional channel-to-channel matching is the absolute value of the difference in propagation delays between any two channels with inputs on the same side of
the isolation barrier. Opposing-directional channel-to-channel matching is the absolute value of the difference in propagation delays between any two channels with
inputs on opposing sides of the isolation barrier.
7
CMH is the maximum common-mode voltage slew rate that can be sustained while maintaining VO > 0.8 VDD2. CML is the maximum common-mode voltage slew rate
that can be sustained while maintaining VO < 0.8 V. The common-mode voltage slew rates apply to both rising and falling common-mode voltage edges. The transient
magnitude is the range over which the common mode is slewed.
8
Dynamic supply current is the incremental amount of supply current required for a 1 Mbps increase in signal data rate. See Figure 8 through Figure 10 for information
on per-channel supply current for unloaded and loaded conditions. See the Power Consumption section for guidance on calculating the per-channel supply current
for a given data rate.
1
Rev. C | Page 5 of 24
ADuM3400/ADuM3401/ADuM3402
Data Sheet
ELECTRICAL CHARACTERISTICS—3 V OPERATION
All voltages are relative to their respective ground. 2.7 V ≤ VDD1 ≤ 3.6 V, 2.7 V ≤ VDD2 ≤ 3.6 V; all minimum/maximum specifications apply
over the entire recommended operation range, unless otherwise noted; all typical specifications are at TA = 25°C, VDD1 = VDD2 = 3.0 V.
Table 2.
Parameter
DC SPECIFICATIONS
Input Supply Current per Channel, Quiescent
Output Supply Current per Channel, Quiescent
ADuM3400, Total Supply Current, Four Channels 1
DC to 2 Mbps
VDD1 Supply Current
VDD2 Supply Current
10 Mbps (BRW and CRW Grades Only)
VDD1 Supply Current
VDD2 Supply Current
90 Mbps (CRW Grade Only)
VDD1 Supply Current
VDD2 Supply Current
ADuM3401, Total Supply Current, Four Channels1
DC to 2 Mbps
VDD1 Supply Current
VDD2 Supply Current
10 Mbps (BRW and CRW Grades Only)
VDD1 Supply Current
VDD2 Supply Current
90 Mbps (CRW Grade Only)
VDD1 Supply Current
VDD2 Supply Current
ADuM3402, Total Supply Current, Four Channels1
DC to 2 Mbps
VDD1 or VDD2 Supply Current
10 Mbps (BRW and CRW Grades Only)
VDD1 or VDD2 Supply Current
90 Mbps (CRW Grade Only)
VDD1 or VDD2 Supply Current
For All Models
Input Currents
Logic High Input Threshold
Logic Low Input Threshold
Logic High Output Voltages
Logic Low Output Voltages
SWITCHING SPECIFICATIONS
ADuM340xARW
Minimum Pulse Width 2
Maximum Data Rate 3
Propagation Delay 4
Symbol
Min
Typ
Max Unit
IDDI (Q)
IDDO (Q)
0.31
0.19
0.49 mA
0.27 mA
IDD1 (Q)
IDD2 (Q)
1.6
0.7
2.1
1.2
mA
mA
DC to 1 MHz logic signal freq.
DC to 1 MHz logic signal freq.
IDD1 (10)
IDD2 (10)
4.8
1.8
7.1
2.3
mA
mA
5 MHz logic signal freq.
5 MHz logic signal freq.
IDD1 (90)
IDD2 (90)
37
11
54
15
mA
mA
45 MHz logic signal freq.
45 MHz logic signal freq.
IDD1 (Q)
IDD2 (Q)
1.4
0.9
1.9
1.5
mA
mA
DC to 1 MHz logic signal freq.
DC to 1 MHz logic signal freq.
IDD1 (10)
IDD2 (10)
4.1
2.5
5.6
3.3
mA
mA
5 MHz logic signal freq.
5 MHz logic signal freq.
IDD1 (90)
IDD2 (90)
31
17
44
24
mA
mA
45 MHz logic signal freq.
45 MHz logic signal freq.
IDD1 (Q), IDD2 (Q)
1.2
1.7
mA
DC to 1 MHz logic signal freq.
IDD1 (10), IDD2 (10)
3.3
4.4
mA
5 MHz logic signal freq.
IDD1 (90), IDD2 (90)
24
39
mA
45 MHz logic signal freq.
µA
0 V ≤ VIA, VIB, VIC, VID ≤ VDD1 or VDD2,
0 V ≤ VE1, VE2 ≤ VDD1 or VDD2
IIA, IIB, IIC,
IID, IE1, IE2
VIH, VEH
VIL, VEL
VOAH, VOBH,
VOCH, VODH
VOAL, VOBL,
VOCL, VODL
−10
+0.01 +10
1.6
0.4
(VDD1 or VDD2) − 0.1 3.0
(VDD1 or VDD2) − 0.4 2.8
0.0
0.04
0.2
0.1
0.1
0.4
1
50
1000 ns
Mbps
100 ns
PW
tPHL, tPLH
V
V
V
V
V
V
V
Rev. C | Page 6 of 24
75
Test Conditions
IOx = −20 µA, VIx = VIxH
IOx = −4 mA, VIx = VIxH
IOx = 20 µA, VIx = VIxL
IOx = 400 µA, VIx = VIxL
IOx = 4 mA, VIx = VIxL
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
Data Sheet
Parameter
Pulse Width Distortion, |tPLH − tPHL|4
Propagation Delay Skew 5
Channel-to-Channel Matching 6
ADuM340xBRW
Minimum Pulse Width2
Maximum Data Rate3
Propagation Delay4
Pulse Width Distortion, |tPLH − tPHL|4
Change vs. Temperature
Propagation Delay Skew5
Channel-to-Channel Matching,
Codirectional Channels6
Channel-to-Channel Matching,
Opposing-Directional Channels6
ADuM340xCRW
Minimum Pulse Width2
Maximum Data Rate3
Propagation Delay4
Pulse Width Distortion, |tPLH − tPHL|4
Change vs. Temperature
Propagation Delay Skew5
Channel-to-Channel Matching,
Codirectional Channels6
Channel-to-Channel Matching,
Opposing-Directional Channels6
For All Models
Output Disable Propagation Delay
(High/Low-to-High Impedance)
Output Enable Propagation Delay
(High Impedance-to-High/Low)
Output Rise/Fall Time (10% to 90%)
Common-Mode Transient Immunity
at Logic High Output 7
Common-Mode Transient Immunity
at Logic Low Output7
Refresh Rate
Input Dynamic Supply Current per Channel 8
Output Dynamic Supply Current per Channel8
ADuM3400/ADuM3401/ADuM3402
Symbol
PWD
tPSK
tPSKCD/OD
Min
Typ
PW
Max
40
50
50
Unit
ns
ns
ns
Test Conditions
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
100
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
tPSK
tPSKCD
22
3
ns
Mbps
ns
ns
ps/°C
ns
ns
tPSKOD
6
ns
tPHL, tPLH
PWD
10
20
38
50
3
5
PW
tPSK
tPSKCD
11.1 ns
Mbps
45
ns
2
ns
ps/°C
16
ns
2
ns
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
tPSKOD
5
ns
CL = 15 pF, CMOS signal levels
tPHL, tPLH
PWD
90
20
8.3
120
34
0.5
3
tPHZ, tPLH
6
8
ns
CL = 15 pF, CMOS signal levels
tPZH, tPZL
6
8
ns
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
VIx = VDD1/VDD2, VCM = 1000 V,
transient magnitude = 800 V
VIx = 0 V, VCM = 1000 V,
transient magnitude = 800 V
tR/tF
|CMH|
25
3
35
ns
kV/µs
|CML|
25
35
kV/µs
1.1
0.10
0.03
Mbps
mA/Mbps
mA/Mbps
fr
IDDI (D)
IDDO (D)
The supply current values for all four channels are combined when running at identical data rates. Output supply current values are specified with no output load
present. The supply current associated with an individual channel operating at a given data rate can be calculated as described in the Power Consumption section.
See Figure 8 through Figure 10 for information on per-channel supply current as a function of data rate for unloaded and loaded conditions. See Figure 11 through
Figure 15 for total VDD1 and VDD2 supply currents as a function of data rate for ADuM3400/ADuM3401/ADuM3402 channel configurations.
2
The minimum pulse width is the shortest pulse width at which the specified pulse width distortion is guaranteed.
3
The maximum data rate is the fastest data rate at which the specified pulse width distortion is guaranteed.
4
tPHL propagation delay is measured from the 50% level of the falling edge of the VIx signal to the 50% level of the falling edge of the VOx signal. tPLH propagation delay is
measured from the 50% level of the rising edge of the VIx signal to the 50% level of the rising edge of the VOx signal.
5
tPSK is the magnitude of the worst-case difference in tPHL or tPLH that is measured between units at the same operating temperature, supply voltages, and output load
within the recommended operating conditions.
6
Codirectional channel-to-channel matching is the absolute value of the difference in propagation delays between any two channels with inputs on the same side of
the isolation barrier. Opposing-directional channel-to-channel matching is the absolute value of the difference in propagation delays between any two channels with
inputs on opposing sides of the isolation barrier.
7
CMH is the maximum common-mode voltage slew rate that can be sustained while maintaining VO > 0.8 VDD2. CML is the maximum common-mode voltage slew rate
that can be sustained while maintaining VO < 0.8 V. The common-mode voltage slew rates apply to both rising and falling common-mode voltage edges. The transient
magnitude is the range over which the common mode is slewed.
8
Dynamic supply current is the incremental amount of supply current required for a 1 Mbps increase in signal data rate. See Figure 8 through Figure 10 for information
on per-channel supply current for unloaded and loaded conditions. See the Power Consumption section for guidance on calculating the per-channel supply current
for a given data rate.
1
Rev. C | Page 7 of 24
ADuM3400/ADuM3401/ADuM3402
Data Sheet
ELECTRICAL CHARACTERISTICS—MIXED 5 V/3 V OR 3 V/5 V OPERATION
All voltages are relative to their respective ground. 5 V/3 V operation: 4.5 V ≤ VDD1 ≤ 5.5 V, 2.7 V ≤ VDD2 ≤ 3.6 V; 3 V/5 V operation:
2.7 V ≤ VDD1 ≤ 3.6 V, 4.5 V ≤ VDD2 ≤ 5.5 V; all minimum/maximum specifications apply over the entire recommended operation range,
unless otherwise noted; all typical specifications are at TA = 25°C; VDD1 = 3.0 V, VDD2 = 5 V or VDD1 = 5 V, VDD2 = 3.0 V.
Table 3.
Parameter
DC SPECIFICATIONS
Input Supply Current per Channel, Quiescent
5 V/3 V Operation
3 V/5 V Operation
Output Supply Current per Channel, Quiescent
5 V/3 V Operation
3 V/5 V Operation
ADuM3400, Total Supply Current, Four Channels1
DC to 2 Mbps
VDD1 Supply Current
5 V/3 V Operation
3 V/5 V Operation
VDD2 Supply Current
5 V/3 V Operation
3 V/5 V Operation
10 Mbps (BRW and CRW Grades Only)
VDD1 Supply Current
5 V/3 V Operation
3 V/5 V Operation
VDD2 Supply Current
5 V/3 V Operation
3 V/5 V Operation
90 Mbps (CRW Grade Only)
VDD1 Supply Current
5 V/3 V Operation
3 V/5 V Operation
VDD2 Supply Current
5 V/3 V Operation
3 V/5 V Operation
ADuM3401, Total Supply Current, Four Channels1
DC to 2 Mbps
VDD1 Supply Current
5 V/3 V Operation
3 V/5 V Operation
VDD2 Supply Current
5 V/3 V Operation
3 V/5 V Operation
10 Mbps (BRW and CRW Grades Only)
VDD1 Supply Current
5 V/3 V Operation
3 V/5 V Operation
VDD2 Supply Current
5 V/3 V Operation
3 V/5 V Operation
Symbol
Min
Typ
Max Unit
Test Conditions
0.57
0.31
0.83
0.49
mA
mA
0.29
0.19
0.27
0.35
mA
mA
2.9
1.6
3.5
2.1
mA
mA
DC to 1 MHz logic signal freq.
DC to 1 MHz logic signal freq.
0.7
1.2
1.2
1.9
mA
mA
DC to 1 MHz logic signal freq.
DC to 1 MHz logic signal freq.
9.0
4.8
11.6
7.1
mA
mA
5 MHz logic signal freq.
5 MHz logic signal freq.
1.8
3.0
2.3
5.5
mA
mA
5 MHz logic signal freq.
5 MHz logic signal freq.
72
37
100
54
mA
mA
45 MHz logic signal freq.
45 MHz logic signal freq.
11
19
15
36
mA
mA
45 MHz logic signal freq.
45 MHz logic signal freq.
2.5
1.4
3.2
1.9
mA
mA
DC to 1 MHz logic signal freq.
DC to 1 MHz logic signal freq.
0.9
1.6
1.5
2.4
mA
mA
DC to 1 MHz logic signal freq.
DC to 1 MHz logic signal freq.
7.4
4.1
10.6
5.6
mA
mA
5 MHz logic signal freq.
5 MHz logic signal freq.
2.5
4.4
3.3
6.5
mA
mA
5 MHz logic signal freq.
5 MHz logic signal freq.
IDDI (Q)
IDDO (Q)
IDD1 (Q)
IDD2 (Q)
IDD1 (10)
IDD2 (10)
IDD1 (90)
IDD2 (90)
IDD1 (Q)
IDD2 (Q)
IDD1 (10)
IDD2 (10)
Rev. C | Page 8 of 24
Data Sheet
Parameter
90 Mbps (CRW Grade Only)
VDD1 Supply Current
5 V/3 V Operation
3 V/5 V Operation
VDD2 Supply Current
5 V/3 V Operation
3 V/5 V Operation
ADuM3402, Total Supply Current, Four Channels1
DC to 2 Mbps
VDD1 Supply Current
5 V/3 V Operation
3 V/5 V Operation
VDD2 Supply Current
5 V/3 V Operation
3 V/5 V Operation
10 Mbps (BRW and CRW Grades Only)
VDD1 Supply Current
5 V/3 V Operation
3 V/5 V Operation
VDD2 Supply Current
5 V/3 V Operation
3 V/5 V Operation
90 Mbps (CRW Grade Only)
VDD1 Supply Current
5 V/3 V Operation
3 V/5 V Operation
VDD2 Supply Current
5 V/3 V Operation
3 V/5 V Operation
For All Models
Input Currents
Logic High Input Threshold
5 V/3 V Operation
3 V/5 V Operation
Logic Low Input Threshold
5 V/3 V Operation
3 V/5 V Operation
Logic High Output Voltages
Logic Low Output Voltages
SWITCHING SPECIFICATIONS
ADuM340xARW
Minimum Pulse Width 2
Maximum Data Rate 3
Propagation Delay 4
Pulse Width Distortion, |tPLH − tPHL|4
Propagation Delay Skew 5
Channel-to-Channel Matching 6
ADuM3400/ADuM3401/ADuM3402
Symbol
Min
Typ
Max Unit
Test Conditions
59
31
82
44
mA
mA
45 MHz logic signal freq.
45 MHz logic signal freq.
17
32
24
46
mA
mA
45 MHz logic signal freq.
45 MHz logic signal freq.
2.0
1.2
2.8
1.7
mA
mA
DC to 1 MHz logic signal freq.
DC to 1 MHz logic signal freq.
1.2
2.0
1.7
2.8
mA
mA
DC to 1 MHz logic signal freq.
DC to 1 MHz logic signal freq.
6.0
3.3
7.5
4.4
mA
mA
5 MHz logic signal freq.
5 MHz logic signal freq.
3.3
6.0
4.4
7.5
mA
mA
5 MHz logic signal freq.
5 MHz logic signal freq.
46
24
62
39
mA
mA
45 MHz logic signal freq.
45 MHz logic signal freq.
24
46
39
62
mA
mA
45 MHz logic signal freq.
45 MHz logic signal freq.
+0.01
+10
µA
0 V ≤ VIA,VIB, VIC,VID ≤ VDD1 or VDD2,
0 V ≤ VE1,VE2 ≤ VDD1 or VDD2
IDD1 (90)
IDD2 (90)
IDD1 (Q)
IDD2 (Q)
IDD1 (10)
IDD2 (10)
IDD1 (90)
IDD2 (90)
IIA, IIB, IIC,
IID, IE1, IE2
VIH, VEH
−10
2.0
1.6
V
V
VIL, VEL
0.8
0.4
VOAH, VOBH, (VDD1 or VDD2) −
0.1
VOCH, VODH (VDD1 or VDD2) −
0.4
VOAL, VOBL,
VOCL, VODL
(VDD1 or VDD2)
(VDD1 or VDD2) −
0.2
0.0
0.1
0.04
0.1
0.2
0.4
PW
tPHL, tPLH
PWD
tPSK
tPSKCD/OD
1
50
70
Rev. C | Page 9 of 24
V
V
V
IOx = −20 µA, VIx = VIxH
V
IOx = −4 mA, VIx = VIxH
V
V
V
IOx = 20 µA, VIx = VIxL
IOx = 400 µA, VIx = VIxL
IOx = 4 mA, VIx = VIxL
1000 ns
Mbps
100 ns
40
ns
50
ns
50
ns
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
ADuM3400/ADuM3401/ADuM3402
Parameter
ADuM340xBRW
Minimum Pulse Width2
Maximum Data Rate3
Propagation Delay4
Pulse Width Distortion, |tPLH − tPHL|4
Change vs. Temperature
Propagation Delay Skew5
Channel-to-Channel Matching,
Codirectional Channels6
Channel-to-Channel Matching,
Opposing-Directional Channels6
ADuM340xCRW
Minimum Pulse Width2
Maximum Data Rate3
Propagation Delay4
Pulse Width Distortion, |tPLH − tPHL|4
Change vs. Temperature
Propagation Delay Skew5
Channel-to-Channel Matching,
Codirectional Channels6
Channel-to-Channel Matching,
Opposing-Directional Channels6
For All Models
Output Disable Propagation Delay
(High/Low-to-High Impedance)
Output Enable Propagation Delay
(High Impedance-to-High/Low)
Output Rise/Fall Time (10% to 90%)
5 V/3 V Operation
3 V/5 V Operation
Common-Mode Transient Immunity
at Logic High Output 7
Common-Mode Transient Immunity
at Logic Low Output7
Refresh Rate
5 V/3 V Operation
3 V/5 V Operation
Input Dynamic Supply Current per Channel 8
5 V/3 V Operation
3 V/5 V Operation
Output Dynamic Supply Current per Channel8
5 V/3 V Operation
3 V/5 V Operation
Symbol
Data Sheet
Min
Typ
PW
Max Unit
Test Conditions
100
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
tPSK
tPSKCD
22
3
ns
Mbps
ns
ns
ps/°C
ns
ns
tPSKOD
6
ns
CL = 15 pF, CMOS signal levels
11.1
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
tPHL, tPLH
PWD
10
15
35
50
3
5
PW
tPSK
tPSKCD
14
2
ns
Mbps
ns
ns
ps/°C
ns
ns
tPSKOD
5
ns
CL = 15 pF, CMOS signal levels
tPHL, tPLH
PWD
90
20
8.3
120
30
0.5
3
40
2
tPHZ, tPLH
6
8
ns
CL = 15 pF, CMOS signal levels
tPZH, tPZL
6
8
ns
CL = 15 pF, CMOS signal levels
tR/tf
CL = 15 pF, CMOS signal levels
|CMH|
25
3.0
2.5
35
ns
ns
kV/µs
|CML|
25
35
kV/µs
1.2
1.1
Mbps
Mbps
0.20
0.10
mA/Mbps
mA/Mbps
0.03
0.05
mA/Mbps
mA/Mbps
fr
IDDI (D)
IDDO (D)
Rev. C | Page 10 of 24
VIx = VDD1/VDD2, VCM = 1000 V,
transient magnitude = 800 V
VIx = 0 V, VCM = 1000 V,
transient magnitude = 800 V
Data Sheet
ADuM3400/ADuM3401/ADuM3402
The supply current values for all four channels are combined when running at identical data rates. Output supply current values are specified with no output load
present. The supply current associated with an individual channel operating at a given data rate can be calculated as described in the Power Consumption section.
See Figure 8 through Figure 10 for information on per-channel supply current as a function of data rate for unloaded and loaded conditions. See Figure 11 through
Figure 15 for total VDD1 and VDD2 supply currents as a function of data rate for ADuM3400/ADuM3401/ADuM3402 channel configurations.
2
The minimum pulse width is the shortest pulse width at which the specified pulse width distortion is guaranteed.
3
The maximum data rate is the fastest data rate at which the specified pulse width distortion is guaranteed.
4
tPHL propagation delay is measured from the 50% level of the falling edge of the VIx signal to the 50% level of the falling edge of the VOx signal. tPLH propagation delay is
measured from the 50% level of the rising edge of the VIx signal to the 50% level of the rising edge of the VOx signal.
5
tPSK is the magnitude of the worst-case difference in tPHL or tPLH that is measured between units at the same operating temperature, supply voltages, and output load
within the recommended operating conditions.
6
Codirectional channel-to-channel matching is the absolute value of the difference in propagation delays between any two channels with inputs on the same side of
the isolation barrier. Opposing-directional channel-to-channel matching is the absolute value of the difference in propagation delays between any two channels with
inputs on opposing sides of the isolation barrier.
7
CMH is the maximum common-mode voltage slew rate that can be sustained while maintaining VO > 0.8 VDD2. CML is the maximum common-mode voltage slew rate
that can be sustained while maintaining VO < 0.8 V. The common-mode voltage slew rates apply to both rising and falling common-mode voltage edges. The transient
magnitude is the range over which the common mode is slewed.
8
Dynamic supply current is the incremental amount of supply current required for a 1 Mbps increase in signal data rate. See Figure 8 through Figure 10 for information
on per-channel supply current for unloaded and loaded conditions. See the Power Consumption section for guidance on calculating the per-channel supply current
for a given data rate.
1
Rev. C | Page 11 of 24
ADuM3400/ADuM3401/ADuM3402
Data Sheet
PACKAGE CHARACTERISTICS
Table 4.
Parameter
Resistance (Input-to-Output) 1
Capacitance (Input-to-Output)1
Input Capacitance 2
IC Junction-to-Case Thermal Resistance, Side 1
IC Junction-to-Case Thermal Resistance, Side 2
1
2
Symbol
RI-O
CI-O
CI
θJCI
θJCO
Min
Typ
1012
2.2
4.0
33
28
Max
Unit
Ω
pF
pF
°C/W
°C/W
Test Conditions
f = 1 MHz
Thermocouple located at
center of package underside
Device considered a 2-terminal device; Pin 1 to Pin 8 are shorted together and Pin 9 to Pin 16 are shorted together.
Input capacitance is from any input data pin to ground.
REGULATORY INFORMATION
The ADuM340x is approved by the organizations listed in Table 5. Refer to Table 10 and the Insulation Lifetime section for details
regarding recommended maximum working voltages for specific crossisolation waveforms and insulation levels.
Table 5.
UL
Recognized under
1577 component recognition program 1
Single protection,
2500 V rms isolation voltage
File E214100
1
2
CSA
Approved under
CSA Component Acceptance Notice #5A
Basic insulation per CSA 60950-1-03 and
IEC 60950-1, 800 V rms (1131 V peak)
maximum working voltage
Reinforced insulation per CSA 60950-1-03
and IEC 60950-1, 400 V rms (566 V peak)
maximum working voltage
File 205078
VDE
Certified according to DIN V VDE V 0884-10
(VDE V 0884-10): 2006-12 2
Reinforced insulation, 560 V peak
File 2471900-4880-0001
In accordance with UL 1577, each ADuM340x is proof tested by applying an insulation test voltage ≥3000 V rms for 1 sec (current leakage detection limit = 5 µA).
In accordance with DIN V VDE V 0884-10, each ADuM340x is proof tested by applying an insulation test voltage ≥1050 V peak for 1 sec (partial discharge detection
limit = 5 pC). The * marking branded on the component designates DIN V VDE V 0884-10 approval.
INSULATION AND SAFETY-RELATED SPECIFICATIONS
Table 6.
Parameter
Rated Dielectric Insulation Voltage
Minimum External Air Gap (Clearance)
Symbol Value
2500
L(I01)
7.7 min
Unit Conditions
V rms 1-minute duration
mm
Measured from input terminals to output terminals,
shortest distance through air
8.1 min
mm
Measured from input terminals to output terminals,
shortest distance path along body
0.017 min mm
Insulation distance through insulation
>175
V
DIN IEC 112/VDE 0303 Part 1
IIIa
Material Group (DIN VDE 0110, 1/89, Table 1)
Minimum External Tracking (Creepage)
L(I02)
Minimum Internal Gap (Internal Clearance)
Tracking Resistance (Comparative Tracking Index)
Isolation Group
CTI
Rev. C | Page 12 of 24
Data Sheet
ADuM3400/ADuM3401/ADuM3402
DIN V VDE V 0884-10 (VDE V 0884-10) INSULATION CHARACTERISTICS
These isolators are suitable for reinforced electrical isolation only within the safety limit data. Maintenance of the safety data is ensured by
protective circuits. The * marking on packages denotes DIN V VDE V 0884-10 approval.
Table 7.
Description
Installation Classification per DIN VDE 0110
For Rated Mains Voltage ≤ 150 V rms
For Rated Mains Voltage ≤ 300 V rms
For Rated Mains Voltage ≤ 400 V rms
Climatic Classification
Pollution Degree per DIN VDE 0110, Table 1
Maximum Working Insulation Voltage
Input-to-Output Test Voltage, Method B1
Conditions
VIORM × 1.875 = VPR, 100% production test,
tm = 1 sec, partial discharge < 5 pC
VIORM × 1.6 = VPR, tm = 60 sec,
partial discharge < 5 pC
Input-to-Output Test Voltage, Method A
After Environmental Tests Subgroup 1
After Input and/or Safety Test Subgroup 2 and Subgroup 3
Highest Allowable Overvoltage
Safety-Limiting Values
VIO = 500 V
Characteristic
Unit
VIORM
VPR
I to IV
I to III
I to II
40/105/21
2
560
1050
V peak
V peak
896
672
V peak
V peak
VTR
4000
V peak
TS
IS1
IS2
RS
150
265
335
>109
°C
mA
mA
Ω
VPR
350
RECOMMENDED OPERATING CONDITIONS
300
Table 8.
Parameter
Operating Temperature Range (TA)
Supply Voltages (VDD1, VDD2) 1
Input Signal Rise and Fall Times
250
SIDE #2
200
Rating
−40°C to +105°C
2.7 V to 5.5 V
1.0 ms
150
SIDE #1
1
100
All voltages are relative to their respective ground. See the DC Correctness
and Magnetic Field Immunity section for information on immunity to
external magnetic fields.
50
0
0
50
100
150
CASE TEMPERATURE (°C)
200
05985-004
SAFETY-LIMITING CURRENT (mA)
Case Temperature
Side 1 Current
Side 2 Current
Insulation Resistance at TS
VIORM × 1.2 = VPR, tm = 60 sec,
partial discharge < 5 pC
Transient overvoltage, tTR = 10 seconds
Maximum value allowed in the
event of a failure (see Figure 4)
Symbol
Figure 4. Thermal Derating Curve, Dependence of Safety-Limiting Values
with Case Temperature per DIN V VDE V 0884-10
Rev. C | Page 13 of 24
ADuM3400/ADuM3401/ADuM3402
Data Sheet
ABSOLUTE MAXIMUM RATINGS
Ambient temperature = 25°C, unless otherwise noted.
Table 9.
Parameter
Storage Temperature Range (TST)
Ambient Operating Temperature Range (TA)
Supply Voltages (VDD1, VDD2) 1
Input Voltage (VIA, VIB, VIC, VID, VE1, VE2)1, 2
Output Voltage (VOA, VOB, VOC, VOD)1, 2
Average Output Current per Pin 3
Side 1 (IO1)
Side 2 (IO2)
Common-Mode Transients (CMH, CML) 4
Rating
−65°C to +150°C
−40°C to +105°C
−0.5 V to +7.0 V
−0.5 V to VDD1 + 0.5 V
−0.5 V to VDDO + 0.5 V
−18 mA to +18 mA
−22 mA to +22 mA
−100 kV/µs to
+100 kV/µs
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
ESD CAUTION
All voltages are relative to their respective ground.
VDDI and VDDO refer to the supply voltages on the input and output sides of a
given channel, respectively. See the PC Board Layout section.
3
See Figure 4 for maximum rated current values for various temperatures.
4
Refers to common-mode transients across the insulation barrier. Commonmode transients exceeding the Absolute Maximum Ratings can cause latchup or permanent damage.
1
2
Table 10. Maximum Continuous Working Voltage 1
Parameter
AC Voltage, Bipolar Waveform
AC Voltage, Unipolar Waveform
Basic Insulation
Reinforced Insulation
DC Voltage
Basic Insulation
Reinforced Insulation
1
Max
565
Unit
V peak
Constraint
50-year minimum lifetime
1131
560
V peak
V peak
Maximum approved working voltage per IEC 60950-1
Maximum approved working voltage per IEC 60950-1 and VDE V 0884-10
1131
560
V peak
V peak
Maximum approved working voltage per IEC 60950-1
Maximum approved working voltage per IEC 60950-1 and VDE V 0884-10
Refers to continuous voltage magnitude imposed across the isolation barrier. See the Insulation Lifetime section for more details.
Table 11. Truth Table (Positive Logic)
VIx Input 1
H
L
x
x
x
x
VEx Input 2
H or NC
H or NC
L
H or NC
L
x
VDDI State1
Powered
Powered
Powered
Unpowered
Unpowered
Powered
VDDO State1
Powered
Powered
Powered
Powered
Powered
Unpowered
VOX Output1
Notes
H
L
Z
H
Outputs return to the input state within 1 µs of VDDI power restoration.
Z
Indeterminate Outputs return to the input state within 1 µs of VDDO power restoration
if VEx state is H or NC. Outputs return to high impedance state within
8 ns of VDDO power restoration if VEx state is L.
VIx and VOx refer to the input and output signals of a given channel (A, B, C, or D). VEx refers to the output enable signal on the same side as the VOx outputs. VDDI and
VDDO refer to the supply voltages on the input and output sides of the given channel, respectively.
2
In noisy environments, connecting VEx to an external logic high or low is recommended.
1
Rev. C | Page 14 of 24
Data Sheet
ADuM3400/ADuM3401/ADuM3402
VDD1 1
16
VDD2
*GND1 2
15
GND2*
VIA 3
ADuM3400
14
VOA
VIB 4
TOP VIEW
(Not to Scale)
13
VOB
12
VOC
VID 6
11
VOD
NC 7
10
VE2
*GND1 8
9
GND2*
VIC 5
NC = NO CONNECT
05985-005
PIN CONFIGURATIONS AND FUNCTION DESCRIPTIONS
*PIN 2 AND PIN 8 ARE INTERNALLY CONNECTED AND CONNECTING BOTH TO
GND1 IS RECOMMENDED. PIN 9 AND PIN 15 ARE INTERNALLY CONNECTED AND
CONNECTING BOTH TO GND2 IS RECOMMENDED. IN NOISY ENVIRONMENTS,
CONNECTING OUTPUT ENABLES (PIN 7 FOR ADuM3401/ADuM3402 AND PIN 10
FOR ALL MODELS) TO AN EXTERNAL LOGIC HIGH OR LOW IS RECOMMENDED.
Figure 5. ADuM3400 Pin Configuration
Table 12. ADuM3400 Pin Function Descriptions
Pin No.
1
2, 8
3
4
5
6
7
9, 15
10
Mnemonic
VDD1
GND1
VIA
VIB
VIC
VID
NC
GND2
VE2
11
12
13
14
16
VOD
VOC
VOB
VOA
VDD2
Description
Supply Voltage for Isolator Side 1, 2.7 V to 5.5 V.
Ground 1. Ground reference for Isolator Side 1.
Logic Input A.
Logic Input B.
Logic Input C.
Logic Input D.
No Connect.
Ground 2. Ground reference for Isolator Side 2.
Output Enable 2. Active high logic input. VOA, VOB, VOC, and VOD outputs are enabled when VE2 is high or disconnected.
VOA, VOB, VOC, and VOD outputs are disabled when VE2 is low. In noisy environments, connecting VE2 to an external logic
high or low is recommended.
Logic Output D.
Logic Output C.
Logic Output B.
Logic Output A.
Supply Voltage for Isolator Side 2, 2.7 V to 5.5 V.
Rev. C | Page 15 of 24
ADuM3400/ADuM3401/ADuM3402
Data Sheet
VDD1 1
16 VDD2
15 GND2*
VIA 3
ADuM3401
VIB 4
TOP VIEW
(Not to Scale)
VIC 5
14 VOA
13 VOB
12 VOC
VOD 6
11 VID
VE1 7
10 VE2
*GND1 8
9
GND2*
05985-006
*GND1 2
*PIN 2 AND PIN 8 ARE INTERNALLY CONNECTED AND CONNECTING BOTH TO
GND1 IS RECOMMENDED. PIN 9 AND PIN 15 ARE INTERNALLY CONNECTED AND
CONNECTING BOTH TO GND2 IS RECOMMENDED. IN NOISY ENVIRONMENTS,
CONNECTING OUTPUT ENABLES (PIN 7 FOR ADuM3401/ADuM3402 AND PIN 10
FOR ALL MODELS) TO AN EXTERNAL LOGIC HIGH OR LOW IS RECOMMENDED.
Figure 6. ADuM3401 Pin Configuration
Table 13. ADuM3401 Pin Function Descriptions
Pin No.
1
2, 8
3
4
5
6
7
Mnemonic
VDD1
GND1
VIA
VIB
VIC
VOD
VE1
9, 15
10
GND2
VE2
11
12
13
14
16
VID
VOC
VOB
VOA
VDD2
Description
Supply Voltage for Isolator Side 1, 2.7 V to 5.5 V.
Ground 1. Ground reference for Isolator Side 1.
Logic Input A.
Logic Input B.
Logic Input C.
Logic Output D.
Output Enable 1. Active high logic input. VOD output is enabled when VE1 is high or disconnected. VOD is disabled when
VE1 is low. In noisy environments, connecting VE1 to an external logic high or low is recommended.
Ground 2. Ground reference for Isolator Side 2.
Output Enable 2. Active high logic input. VOA, VOB, and VOC outputs are enabled when VE2 is high or disconnected.
VOA, VOB, and VOC outputs are disabled when VE2 is low. In noisy environments, connecting VE2 to an external logic high
or low is recommended.
Logic Input D.
Logic Output C.
Logic Output B.
Logic Output A.
Supply Voltage for Isolator Side 1, 2.7 V to 5.5 V.
Rev. C | Page 16 of 24
ADuM3400/ADuM3401/ADuM3402
VDD1 1
16
VDD2
*GND1 2
15
GND2*
VIA 3
ADuM3402
14
VOA
VIB 4
TOP VIEW
(Not to Scale)
13
VOB
12
VIC
VOD 6
11
VID
VE1 7
10
VE2
*GND1 8
9
GND2*
VOC 5
05985-007
Data Sheet
*PIN 2 AND PIN 8 ARE INTERNALLY CONNECTED AND CONNECTING BOTH TO
GND1 IS RECOMMENDED. PIN 9 AND PIN 15 ARE INTERNALLY CONNECTED AND
CONNECTING BOTH TO GND2 IS RECOMMENDED. IN NOISY ENVIRONMENTS,
CONNECTING OUTPUT ENABLES (PIN 7 FOR ADuM3401/ADuM3402 AND PIN 10
FOR ALL MODELS) TO AN EXTERNAL LOGIC HIGH OR LOW IS RECOMMENDED.
Figure 7. ADuM3402 Pin Configuration
Table 14. ADuM3402 Pin Function Descriptions
Pin No.
1
2, 8
3
4
5
6
7
Mnemonic
VDD1
GND1
VIA
VIB
VOC
VOD
VE1
9, 15
10
GND2
VE2
11
12
13
14
16
VID
VIC
VOB
VOA
VDD2
Description
Supply Voltage for Isolator Side 1, 2.7 V to 5.5 V.
Ground 1. Ground reference for Isolator Side 1.
Logic Input A.
Logic Input B.
Logic Output C.
Logic Output D.
Output Enable 1. Active high logic input. VOC and VOD outputs are enabled when VE1 is high or disconnected.
VOC and VOD outputs are disabled when VE1 is low. In noisy environments, connecting VE1 to an external logic high or
low is recommended.
Ground 2. Ground reference for Isolator Side 2.
Output Enable 2. Active high logic input. VOA and VOB outputs are enabled when VE2 is high or disconnected.
VOA and VOB outputs are disabled when VE2 is low. In noisy environments, connecting VE2 to an external logic high or
low is recommended.
Logic Input D.
Logic Input C.
Logic Output B.
Logic Output A.
Supply Voltage for Isolator Side 2, 2.7 V to 5.5 V.
Rev. C | Page 17 of 24
ADuM3400/ADuM3401/ADuM3402
Data Sheet
80
15
60
CURRENT (mA)
20
5V
10
3V
5V
0
20
80
60
40
DATA RATE (Mbps)
100
0
0
Figure 8. Typical Input Supply Current per Channel vs. Data Rate (No Load)
40
60
DATA RATE (Mbps)
15
60
CURRENT (mA)
80
100
40
20
5
5V
5V
20
40
60
DATA RATE (Mbps)
80
100
05985-009
0
0
0
Figure 9. Typical Output Supply Current per Channel vs. Data Rate (No Load)
15
60
CURRENT (mA)
80
5V
40
60
DATA RATE (Mbps)
80
100
Figure 12. Typical ADuM3400 VDD2 Supply Current vs. Data Rate
for 5 V and 3 V Operation
20
10
20
05985-012
3V
3V
0
5
40
5V
20
3V
0
0
20
40
60
DATA RATE (Mbps)
80
100
05985-010
3V
Figure 10. Typical Output Supply Current per Channel vs. Data Rate
(15 pF Output Load)
Rev. C | Page 18 of 24
0
0
20
40
60
DATA RATE (Mbps)
80
100
Figure 13. Typical ADuM3401 VDD1 Supply Current vs. Data Rate
for 5 V and 3 V Operation
05985-013
CURRENT/CHANNEL (mA)
80
Figure 11. Typical ADuM3400 VDD1 Supply Current vs. Data Rate
for 5 V and 3 V Operation
20
10
20
05985-011
20
0
CURRENT/CHANNEL (mA)
40
3V
5
05985-008
CURRENT/CHANNEL (mA)
TYPICAL PERFORMANCE CHARACTERISTICS
Data Sheet
ADuM3400/ADuM3401/ADuM3402
40
80
PROPAGATION DELAY (ns)
CURRENT (mA)
60
40
5V
20
3V
35
30
5V
0
20
40
60
DATA RATE (Mbps)
80
100
Figure 14. Typical ADuM3401 VDD2 Supply Current vs. Data Rate
for 5 V and 3 V Operation
CURRENT (mA)
60
40
5V
20
20
40
60
DATA RATE (Mbps)
80
100
05985-015
3V
0
–25
0
50
25
TEMPERATURE (°C)
75
Figure 16. Propagation Delay vs. Temperature, C Grade
80
0
25
–50
Figure 15. Typical ADuM3402 VDD1 or VDD2 Supply Current vs. Data Rate
for 5 V and 3 V Operation
Rev. C | Page 19 of 24
100
05985-016
0
05985-014
3V
ADuM3400/ADuM3401/ADuM3402
Data Sheet
APPLICATION INFORMATION
The ADuM340x digital isolator requires no external interface
circuitry for the logic interfaces. Power supply bypassing is
strongly recommended at the input and output supply pins (see
Figure 17). Bypass capacitors are most conveniently connected
between Pin 1 and Pin 2 for VDD1 and between Pin 15 and
Pin 16 for VDD2. The capacitor value should be between 0.01 µF
and 0.1 µF. The total lead length between both ends of the
capacitor and the input power supply pin should not exceed
20 mm. Bypassing between Pin 1 and Pin 8 and between Pin 9
and Pin 16 should also be considered unless the ground pair on
each package side is connected close to the package.
VDD2
GND2
VOA
VOB
VOC/IC
VOD/ID
VE2
GND2
PROPAGATION DELAY-RELATED PARAMETERS
Propagation delay is a parameter that describes the time it takes
a logic signal to propagate through a component. The propagation
delay to a logic low output can differ from the propagation
delay to a logic high.
INPUT (VIx)
50%
tPLH
OUTPUT (VOx)
tPHL
50%
Figure 18. Propagation Delay Parameters
05985-017
VDD1
GND1
VIA
VIB
VIC/OC
VID/OD
VE1
GND1
While the ADuM340x improve system-level ESD reliability,
they are no substitute for a robust system-level design. See the
AN-793 Application Note, ESD/Latch-Up Considerations with
iCoupler Isolation Products for detailed recommendations on
board layout and system-level design.
05985-018
PC BOARD LAYOUT
Figure 17. Recommended Printed Circuit Board Layout
In applications involving high common-mode transients, care
should be taken to ensure that board coupling across the isolation
barrier is minimized. Furthermore, the board layout should be
designed such that any coupling that does occur equally affects
all pins on a given component side. Failure to ensure this could
cause voltage differentials between pins exceeding the Absolute
Maximum Ratings of the device, thereby leading to latch-up or
permanent damage.
Pulse width distortion is the maximum difference between
these two propagation delay values and is an indication of how
accurately the input signal’s timing is preserved.
Channel-to-channel matching refers to the maximum amount
the propagation delay differs between channels within a single
ADuM340x component.
Propagation delay skew refers to the maximum amount the
propagation delay differs between multiple ADuM340x
components operating under the same conditions.
See the AN-1109 Application Note for board layout guidelines.
DC CORRECTNESS AND MAGNETIC FIELD IMMUNITY
SYSTEM-LEVEL ESD CONSIDERATIONS AND
ENHANCEMENTS
Positive and negative logic transitions at the isolator input cause
narrow (~1 ns) pulses to be sent to the decoder via the transformer.
The decoder is bistable and is, therefore, either set or reset by
the pulses, indicating input logic transitions. In the absence of
logic transitions at the input for more than ~1 µs, a periodic set
of refresh pulses indicative of the correct input state are sent to
ensure dc correctness at the output. If the decoder receives no
internal pulses of more than about 5 µs, the input side is
assumed to be unpowered or nonfunctional, in which case the
isolator output is forced to a default state (see Table 11) by the
watchdog timer circuit.
System-level ESD reliability (for example, per IEC 61000-4-x) is
highly dependent on system design, which varies widely by
application. The ADuM340x incorporate many enhancements
to make ESD reliability less dependent on system design. The
enhancements include:
•
ESD protection cells added to all input/output interfaces.
•
Key metal trace resistances reduced using wider geometry
and paralleling of lines with vias.
•
The SCR effect inherent in CMOS devices minimized by
use of guarding and isolation technique between PMOS
and NMOS devices.
•
Areas of high electric field concentration eliminated using
45° corners on metal traces.
•
Supply pin overvoltage prevented with larger ESD clamps
between each supply pin and its respective ground.
The limitation on the magnetic field immunity of the ADuM340x
is set by the condition in which induced voltage in the receiving
coil of the transformer is sufficiently large to either falsely set or
reset the decoder. The following analysis defines the conditions
under which this can occur. The 3 V operating condition of the
ADuM340x is examined because it represents the most
susceptible mode of operation.
Rev. C | Page 20 of 24
Data Sheet
ADuM3400/ADuM3401/ADuM3402
where:
β is magnetic flux density (gauss).
N is the number of turns in the receiving coil.
rn is the radius of the nth turn in the receiving coil (cm).
Given the geometry of the receiving coil in the ADuM340x and
an imposed requirement that the induced voltage be at most
50% of the 0.5 V margin at the decoder, a maximum allowable
magnetic field is calculated as shown in Figure 19.
MAXIMUM ALLOWABLE MAGNETIC FLUX
DENSITY (kgauss)
100
DISTANCE = 1m
100
10
DISTANCE = 100mm
1
DISTANCE = 5mm
0.1
0.01
10k
1k
100k
1M
10M
100M
MAGNETIC FIELD FREQUENCY (Hz)
05985-020
V = (−dβ/dt)∑∏rn2; N = 1, 2, … , N
1000
MAXIMUM ALLOWABLE CURRENT (kA)
The pulses at the transformer output have an amplitude greater
than 1.0 V. The decoder has a sensing threshold at about 0.5 V, thus
establishing a 0.5 V margin in which induced voltages can be
tolerated. The voltage induced across the receiving coil is given by
Figure 20. Maximum Allowable Current
for Various Current-to-ADuM340x Spacings
Note that at combinations of strong magnetic field and high
frequency, any loops formed by printed circuit board traces
could induce error voltages sufficiently large enough to trigger
the thresholds of succeeding circuitry. Care should be taken in
the layout of such traces to avoid this possibility.
10
1
POWER CONSUMPTION
0.1
The supply current at a given channel of the ADuM340x
isolator is a function of the supply voltage, the channel’s data
rate, and the channel’s output load.
0.01
For each input channel, the supply current is given by
100k
10k
10M
1M
MAGNETIC FIELD FREQUENCY (Hz)
100M
05985-019
0.001
1k
Figure 19. Maximum Allowable External Magnetic Flux Density
IDDI = IDDI (Q)
f ≤ 0.5 fr
IDDI = IDDI (D) × (2f − fr) + IDDI (Q)
f > 0.5 fr
For example, at a magnetic field frequency of 1 MHz, the
maximum allowable magnetic field of 0.2 kgauss induces a
voltage of 0.25 V at the receiving coil, which is about 50% of the
sensing threshold and does not cause a faulty output transition.
Similarly, if such an event were to occur during a transmitted
pulse (and was of the worst-case polarity), it would reduce the
received pulse from >1.0 V to 0.75 V—still well above the 0.5 V
sensing threshold of the decoder.
For each output channel, the supply current is given by
The preceding magnetic flux density values correspond to
specific current magnitudes at given distances from the
ADuM340x transformers. Figure 20 expresses these allowable
current magnitudes as a function of frequency for selected
distances. As shown, the ADuM340x is extremely immune and
can be affected only by extremely large currents operated at
high frequency very close to the component. For the 1 MHz
example noted, one would have to place a 0.5 kA current 5 mm
away from the ADuM340x to affect the operation of the
component.
CL is the output load capacitance (pF).
IDDO = IDDO (Q)
f ≤ 0.5 fr
IDDO = (IDDO (D) + (0.5 × 10 ) × CL × VDDO) × (2f − fr) + IDDO (Q)
f > 0.5 fr
−3
where:
IDDI (D), IDDO (D) are the input and output dynamic supply currents
per channel (mA/Mbps).
VDDO is the output supply voltage (V).
f is the input logic signal frequency (MHz); it is half of the input
data rate expressed in units of Mbps.
fr is the input stage refresh rate (Mbps).
IDDI (Q), IDDO (Q) are the specified input and output quiescent
supply currents (mA).
Rev. C | Page 21 of 24
ADuM3400/ADuM3401/ADuM3402
Data Sheet
To calculate the total IDD1 and IDD2 supply current, the supply
currents for each input and output channel corresponding to
VDD1 and VDD2 are calculated and totaled. Figure 8 provides the
per-channel input supply current as a function of the data rate.
Figure 9 and Figure 10 provide the per-channel supply output
current as a function of the data rate for an unloaded output
condition and for a 15 pF output condition, respectively. Figure 11
through Figure 15 provide the total VDD1 and VDD2 supply current
as a function of the data rate for ADuM3400/ADuM3401/
ADuM3402 channel configurations.
In the case of unipolar ac or dc voltage, the stress on the
insulation is significantly lower, which allows operation at
higher working voltages while still achieving a 50-year service
life. The working voltages listed in Table 10 can be applied while
maintaining the 50-year minimum lifetime provided the voltage
conforms to either the unipolar ac or dc voltage cases. Any cross
insulation voltage waveform that does not conform to Figure 22 or
Figure 23 should be treated as a bipolar ac waveform and its
peak voltage should be limited to the 50-year lifetime voltage
value listed in Table 10.
INSULATION LIFETIME
Note that the voltage presented in Figure 22 is shown as
sinusoidal for illustration purposes only. It is meant to represent
any voltage waveform varying between 0 V and some limiting
value. The limiting value can be positive or negative, but the
voltage cannot cross 0 V.
The insulation lifetime of the ADuM340x depends on the
voltage waveform type imposed across the isolation barrier. The
iCoupler insulation structure degrades at different rates
depending on whether the waveform is bipolar ac, unipolar ac,
or dc. Figure 21, Figure 22, and Figure 23 illustrate these
different isolation voltage waveforms.
Bipolar ac voltage is the most stringent environment. The goal
of a 50-year operating lifetime under the ac bipolar condition
determines the recommended maximum working voltage of
Analog Devices.
Rev. C | Page 22 of 24
05985-021
0V
Figure 21. Bipolar AC Waveform
RATED PEAK VOLTAGE
05985-022
Analog Devices performs accelerated life testing using voltage
levels higher than the rated continuous working voltage.
Acceleration factors for several operating conditions are
determined. These factors allow calculation of the time to
failure at the actual working voltage. The values shown in
Figure 21 summarize the peak voltage for 50 years of service life
for a bipolar ac operating condition, and the maximum
CSA/VDE approved working voltages. In many cases, the
approved working voltage is higher than the 50-year service life
voltage. Operation at these high working voltages can lead to
shortened insulation life in some cases.
RATED PEAK VOLTAGE
0V
Figure 22. Unipolar AC Waveform
RATED PEAK VOLTAGE
05985-023
All insulation structures eventually break down when subjected
to voltage stress over a sufficiently long period. The rate of
insulation degradation is dependent on the characteristics of
the voltage waveform applied across the insulation. In addition
to the testing performed by the regulatory agencies, Analog
Devices carries out an extensive set of evaluations to determine
the lifetime of the insulation structure within the ADuM340x.
0V
Figure 23. DC Waveform
Data Sheet
ADuM3400/ADuM3401/ADuM3402
OUTLINE DIMENSIONS
10.50 (0.4134)
10.10 (0.3976)
9
16
7.60 (0.2992)
7.40 (0.2913)
8
1.27 (0.0500)
BSC
0.30 (0.0118)
0.10 (0.0039)
COPLANARITY
0.10
0.51 (0.0201)
0.31 (0.0122)
10.65 (0.4193)
10.00 (0.3937)
0.75 (0.0295)
45°
0.25 (0.0098)
2.65 (0.1043)
2.35 (0.0925)
SEATING
PLANE
8°
0°
1.27 (0.0500)
0.40 (0.0157)
0.33 (0.0130)
0.20 (0.0079)
COMPLIANT TO JEDEC STANDARDS MS-013-AA
CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN.
03-27-2007-B
1
Figure 24. 16-Lead Standard Small Outline Package [SOIC_W]
Wide Body (RW-16)
Dimensions shown in millimeters and (inches)
ORDERING GUIDE
Model 1, 2
ADuM3400ARWZ
ADuM3400BRWZ
ADuM3400CRWZ
ADuM3401ARWZ
ADuM3401BRWZ
ADuM3401CRWZ
ADuM3402ARWZ
ADuM3402BRWZ
ADuM3402CRWZ
1
2
Number
of Inputs,
VDD1 Side
4
4
4
3
3
3
2
2
2
Number
of Inputs,
VDD2 Side
0
0
0
1
1
1
2
2
2
Maximum
Data Rate
(Mbps)
1
10
90
1
10
90
1
10
90
Maximum
Propagation
Delay, 5 V (ns)
100
50
32
100
50
32
100
50
32
Maximum
Pulse Width
Distortion (ns)
40
3
2
40
3
2
40
3
2
Temperature
Range
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
Z = RoHS Compliant Part.
Tape and reel are available. The addition of an -RL suffix designates a 13” (1,000 units) tape-and-reel option.
Rev. C | Page 23 of 24
Package Description
16-Lead SOIC_W
16-Lead SOIC_W
16-Lead SOIC_W
16-Lead SOIC_W
16-Lead SOIC_W
16-Lead SOIC_W
16-Lead SOIC_W
16-Lead SOIC_W
16-Lead SOIC_W
Package
Option
RW-16
RW-16
RW-16
RW-16
RW-16
RW-16
RW-16
RW-16
RW-16
ADuM3400/ADuM3401/ADuM3402
Data Sheet
NOTES
©2006–2014 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D05985-0-4/14(C)
Rev. C | Page 24 of 24